S-80955CLMC-G7RT2G Equivalent & Substitute Parts

Part Overview

The S-80955CLMC-G7RT2G is a voltage supervisor IC from ABLIC Inc. designed for power management applications. This single-channel supervisor operates as a push-pull, totem pole output device with active-low reset functionality, housed in a compact SOT-23-5 surface mount package. The device monitors a 5.5V threshold voltage and provides an 18ms minimum reset timeout, making it suitable for system reset and power supply monitoring circuits.

The S-80955CLMC-G7RT2G carries a "Not For New Designs" product status. This designation necessitates identification of equivalent substitute parts for ongoing production requirements and new design implementations. The substitute identified maintains identical electrical and mechanical specifications while offering active product status.

Substiute Parts

S-80955CLMC-G7RT2G

ABLIC Inc.In Stock: 3236S-80955CLMC-G7RT2G Datasheet

Current PartRFQ

S-80955CLMC-G7RT2U

ABLIC Inc.In Stock: 932S-80955CLMC-G7RT2U Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the S-80955CLMC-G7RT2G is determined by strict equivalence across the following critical parameters:

• Voltage threshold: 5.5V
• Output type: Push-Pull, Totem Pole configuration
• Reset polarity: Active Low
• Reset timeout: 18ms Minimum
• Number of monitored channels: 1
• Package type: SOT-23-5 (SC-74A, SOT-753)
• Operating temperature range: -40°C ~ 85°C
• Mounting type: Surface Mount
• Compliance certifications: ROHS3, REACH Unaffected

The identified substitute part S-80955CLMC-G7RT2U shares all electrical and mechanical specifications with the main part. The only difference is the packaging format: the main part is supplied in Tape & Reel (TR) format, while the substitute is supplied in Cut Tape (CT) format. Both formats contain identical die and lead configurations suitable for automated assembly processes.

Parameter Comparison

Engineering Selection Recommendations

The S-80955CLMC-G7RT2U is the direct parametric equivalent for the S-80955CLMC-G7RT2G. Both parts are manufactured by ABLIC Inc. within the S-809xxC series and maintain identical electrical performance specifications.

For new design implementations, the S-80955CLMC-G7RT2U is the appropriate selection due to its Active product status. The S-80955CLMC-G7RT2G, designated as "Not For New Designs," should be reserved for legacy system maintenance or existing production lines where component continuity is required.

Both parts satisfy ROHS3 compliance and REACH regulatory requirements. The MSL rating of 1 (Unlimited) indicates no moisture sensitivity constraints during storage or handling.

The packaging format difference (Tape & Reel versus Cut Tape) does not affect electrical or mechanical compatibility. Selection between these formats depends on assembly process requirements and volume considerations.

Frequently Asked Questions (FAQ)

Q: Can S-80955CLMC-G7RT2U be used as a direct replacement for S-80955CLMC-G7RT2G in existing designs?

A: Yes. Both parts are electrically and mechanically identical. The substitute maintains the same 5.5V threshold voltage, push-pull totem pole output, active-low reset, and 18ms reset timeout. The SOT-23-5 package dimensions and pinout are identical, allowing direct PCB substitution.

Q: What is the difference between Tape & Reel and Cut Tape packaging?

A: Both packaging formats contain the same component with identical electrical specifications. Tape & Reel (TR) format supplies components on continuous carrier tape suitable for high-volume automated pick-and-place assembly. Cut Tape (CT) format supplies individual component segments cut from the carrier tape, typically used for lower-volume applications or manual assembly processes.

Q: Why is the S-80955CLMC-G7RT2G marked "Not For New Designs"?

A: This designation indicates the part has reached end-of-life status within ABLIC Inc.'s product portfolio. New design implementations should utilize the S-80955CLMC-G7RT2U, which carries Active product status and ensures long-term availability and manufacturing support.

Q: Are there any compliance or certification differences between these parts?

A: No. Both parts maintain identical ROHS3 compliance and REACH regulatory status. The MSL rating of 1 (Unlimited) applies to both variants, indicating no moisture sensitivity restrictions.

Q: Can these parts be used interchangeably in automated assembly?

A: Yes, with assembly process considerations. The Tape & Reel format is optimized for continuous automated pick-and-place operations. The Cut Tape format requires manual feeding or specialized tape-to-reel conversion equipment. Component electrical and mechanical specifications remain identical regardless of packaging format.