S-80950CLNB-G7LT2G Equivalent & Substitute Parts

Part Overview

The S-80950CLNB-G7LT2G is a single-channel voltage supervisor IC manufactured by ABLIC Inc., designed for power management applications requiring active-low reset functionality. This device monitors a 5V threshold and provides push-pull, totem-pole output configuration in a compact SC-82A (SOT-343) surface-mount package.

The main part carries a "Not For New Designs" status, making identification of active equivalent alternatives essential for ongoing production and new project implementations. Substitute parts must maintain identical electrical characteristics, package specifications, and compliance certifications to ensure direct interchangeability without circuit redesign.

Substiute Parts

S-80950CLNB-G7LT2G

ABLIC Inc.In Stock: 1160S-80950CLNB-G7LT2G Datasheet

Current PartRFQ

S-80950CLNB-G7LT2U

ABLIC Inc.In Stock: 807S-80950CLNB-G7LT2U Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the S-80950CLNB-G7LT2G is determined by strict equivalence across the following critical parameters:

• Voltage Threshold: Must be 5V
• Number of Channels: Must be single-channel (1)
• Output Type: Must be push-pull, totem-pole configuration
• Reset Logic: Must be active-low
• Reset Timeout: Must be 18ms minimum
• Operating Temperature Range: Must be -40°C ~ 85°C
• Package / Case: Must be SC-82A, SOT-343
• Mounting Type: Must be surface mount
• Compliance: Must maintain ROHS3 compliance and MSL 1 rating

The S-80950CLNB-G7LT2U qualifies as a parametric equivalent substitute, sharing all electrical and mechanical specifications with the main part while offering active product status for new procurement.

Parameter Comparison

Engineering Selection Recommendations

The S-80950CLNB-G7LT2U is the direct substitute for S-80950CLNB-G7LT2G applications. Both parts are manufactured by ABLIC Inc. and maintain identical electrical specifications, package configuration, and compliance certifications (ROHS3, MSL 1).

The primary distinction is product lifecycle status: S-80950CLNB-G7LT2G is designated "Not For New Designs," while S-80950CLNB-G7LT2U carries "Active" status. For new product development, ongoing production, or long-term supply chain planning, S-80950CLNB-G7LT2U is the appropriate selection. Both parts are interchangeable at the circuit level without modification to PCB layout, schematic, or firmware.

Frequently Asked Questions (FAQ)

Q: Can S-80950CLNB-G7LT2U be used as a direct replacement for S-80950CLNB-G7LT2G?

A: Yes. Both parts share identical electrical parameters, package specifications, and compliance ratings. No circuit modifications are required for substitution.

Q: What is the difference between these two part numbers?

A: The parts are electrically and mechanically equivalent. The primary difference is product status: S-80950CLNB-G7LT2G is marked "Not For New Designs," while S-80950CLNB-G7LT2U is active. The suffix variation (G7LT2G vs. G7LT2U) reflects this lifecycle designation.

Q: Are there any package or pinout differences?

A: No. Both parts use the SC-82A (SOT-343) surface-mount package with identical pinout and footprint. PCB designs require no modification.

Q: What compliance certifications apply to both parts?

A: Both parts are ROHS3 compliant, REACH unaffected, and carry MSL 1 (unlimited moisture sensitivity level) rating.

Q: Which part should be specified for new designs?

A: S-80950CLNB-G7LT2U should be specified for new product development due to its active product status and ongoing manufacturer support.