S-80922CLPF-G6STFG Equivalent & Substitute Parts

Part Overview

The S-80922CLPF-G6STFG is a voltage supervisor IC from ABLIC Inc. designed for single-channel voltage monitoring applications. This component functions as a voltage detector with push-pull, totem pole output configuration, operating across the industrial temperature range of -40°C to 85°C. The part is classified as obsolete, which necessitates identification of functionally equivalent alternatives for ongoing system support and new designs requiring this supervision topology.

Substiute Parts

S-80922CLPF-G6STFG

ABLIC Inc.In Stock: 715S-80922CLPF-G6STFG Datasheet

Current PartRFQ

S-80922CLPF-G6STFU

ABLIC Inc.In Stock: 778S-80922CLPF-G6STFU Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the S-80922CLPF-G6STFG is determined by strict equivalence across the following critical parameters:

• Single-channel voltage monitoring capability
• 2.2V threshold voltage setting
• Push-pull, totem pole output topology
• Active low reset configuration with 18ms minimum timeout
• Operating temperature range of -40°C to 85°C
• Surface mount assembly with 4-SMD, flat leads package (SNT-4A)
• ROHS3 compliance and REACH unaffected status

The substitute part S-80922CLPF-G6STFU maintains identical electrical and mechanical specifications. The primary distinction is packaging format: the main part is supplied in standard packaging, while the substitute is available in Tape & Reel (TR) format. This packaging difference does not affect functional equivalence or circuit-level performance.

Parameter Comparison

Engineering Selection Recommendations

The S-80922CLPF-G6STFU is the direct functional equivalent for applications currently using or requiring the S-80922CLPF-G6STFG. The substitute part is classified as active product status, ensuring continued availability and manufacturing support. Both parts maintain identical electrical performance, thermal characteristics, and regulatory compliance certifications.

For new designs or production transitions, the S-80922CLPF-G6STFU is the appropriate selection. The Tape & Reel packaging format provides advantages for automated assembly processes and high-volume manufacturing environments. No circuit redesign or board layout modifications are required when transitioning between these parts.

Frequently Asked Questions (FAQ)

Q: Can S-80922CLPF-G6STFU be used as a direct replacement for S-80922CLPF-G6STFG?

A: Yes. Both parts are electrically and mechanically identical. They share the same voltage threshold (2.2V), output topology (push-pull, totem pole), reset configuration (active low, 18ms minimum), operating temperature range (-40°C to 85°C), and package type (4-SMD, flat leads, SNT-4A). The only difference is packaging format.

Q: What is the difference between the standard packaging and Tape & Reel format?

A: Tape & Reel (TR) packaging is the industry standard for automated surface mount assembly. Components are wound on continuous tape with carrier tape, enabling high-speed pick-and-place machine compatibility. Standard packaging typically refers to bulk or tube formats suitable for manual handling or lower-volume assembly. Functionally, both formats contain identical components.

Q: Are there any compliance or regulatory differences between these parts?

A: No. Both parts maintain ROHS3 compliance and REACH unaffected status. Moisture sensitivity level (MSL 1) is identical, indicating unlimited shelf life under standard storage conditions.

Q: Why is the main part marked as obsolete?

A: Product obsolescence reflects manufacturing discontinuation by ABLIC Inc. The S-80922CLPF-G6STFU remains in active production, providing continuity for applications requiring this voltage supervisor topology.

Q: Can these parts be used interchangeably in existing PCB designs?

A: Yes. Both parts use the identical SNT-4A package with 4-SMD, flat leads configuration. No PCB layout modifications, footprint changes, or design alterations are necessary.