S-80916CLNB-G6LT2G Equivalent & Substitute Parts

Part Overview

The S-80916CLNB-G6LT2G is a single-channel voltage supervisor IC manufactured by ABLIC Inc., designed for power management applications. This device functions as a voltage detector with push-pull, totem pole output configuration and active-low reset functionality. The part is classified as Not For New Designs, indicating it has reached end-of-life status. For ongoing production requirements or new system implementations, equivalent substitute parts with active product status are available while maintaining identical electrical and mechanical specifications.

Substiute Parts

S-80916CLNB-G6LT2G

ABLIC Inc.In Stock: 1211S-80916CLNB-G6LT2G Datasheet

Current PartRFQ

S-80916CLNB-G6LT2U

ABLIC Inc.In Stock: 864S-80916CLNB-G6LT2U Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the S-80916CLNB-G6LT2G is determined by strict equivalence across the following critical parameters:

• Voltage threshold detection: 1.6V
• Output stage configuration: Push-Pull, Totem Pole
• Reset signal polarity: Active Low
• Reset timeout specification: 18ms Minimum
• Package and pinout: SC-82A, SOT-343
• Operating temperature range: -40°C ~ 85°C
• Regulatory compliance: ROHS3, REACH Unaffected

The substitute part S-80916CLNB-G6LT2U maintains complete parametric equivalence across all electrical and mechanical specifications. The primary distinction is product lifecycle status: the main part is designated Not For New Designs, while the substitute maintains Active product status.

Parameter Comparison

Engineering Selection Recommendations

For applications currently using S-80916CLNB-G6LT2G, the S-80916CLNB-G6LT2U provides direct functional replacement with no design modifications required. Both parts are ROHS3 compliant and REACH unaffected, meeting current regulatory requirements.

The primary selection criterion is product lifecycle status. The main part number is designated Not For New Designs, making it unsuitable for new product development or long-term production commitments. The substitute part maintains Active status, ensuring continued availability and manufacturer support for ongoing production and future designs.

Both parts share identical electrical specifications, package geometry, and thermal operating range, enabling pin-for-pin and functional equivalence in all circuit applications.

Frequently Asked Questions (FAQ)

Q: Can S-80916CLNB-G6LT2U be used as a direct replacement for S-80916CLNB-G6LT2G?

A: Yes. Both parts are electrically and mechanically identical. The substitute part provides the same voltage threshold (1.6V), output configuration (push-pull, totem pole), reset timing (18ms minimum), and package (SC-82A, SOT-343). No circuit modifications are required.

Q: What is the difference between these two part numbers?

A: The only difference is product lifecycle status. S-80916CLNB-G6LT2G is Not For New Designs, while S-80916CLNB-G6LT2U is Active. All electrical and mechanical parameters are identical.

Q: Are both parts RoHS compliant?

A: Yes. Both S-80916CLNB-G6LT2G and S-80916CLNB-G6LT2U are ROHS3 compliant and REACH unaffected.

Q: Can these parts be used interchangeably on the same PCB?

A: Yes. Both parts use the same SC-82A, SOT-343 package with identical pinout and surface mount configuration. They are fully interchangeable at the board level.

Q: Why should I transition from S-80916CLNB-G6LT2G to S-80916CLNB-G6LT2U?

A: The main part is designated Not For New Designs, indicating end-of-life status. The substitute maintains Active product status, ensuring long-term availability, manufacturer support, and suitability for new product development.