S-80837CLUA-B6WT2G Equivalent & Substitute Parts

Part Overview

The S-80837CLUA-B6WT2G is a voltage supervisor IC manufactured by ABLIC Inc., classified as a Power Management (PMIC) component. This single-channel voltage detector operates with a 3.7V threshold and provides push-pull, totem pole output with active low reset functionality. The device is housed in a SOT-89-3 package and is suitable for surface mount applications. The part is currently in active product status and ROHS3 compliant. Substitute parts are identified based on identical electrical specifications and compatible packaging configurations to support procurement flexibility and inventory management.

Substiute Parts

S-80837CLUA-B6WT2G

ABLIC Inc.In Stock: 979S-80837CLUA-B6WT2G Datasheet

Current PartRFQ

S-80837CLUA-B6WT2U

ABLIC Inc.In Stock: 1313S-80837CLUA-B6WT2U Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the S-80837CLUA-B6WT2G are identified based on strict equivalence of the following critical parameters:

• Voltage threshold: 3.7V
• Output configuration: Push-Pull, Totem Pole
• Reset polarity: Active Low
• Operating temperature range: -40°C ~ 85°C
• Package type: SOT-89-3 (TO-243AA)
• Mounting type: Surface Mount
• Series classification: S-808xxC
• Manufacturer: ABLIC Inc.
• Product status: Active

The primary difference between the main part and its substitute is the packaging format: the main part is supplied in Tape & Reel (TR) format, while the substitute is available in Cut Tape (CT) format. Both formats contain identical die and electrical specifications, with the packaging difference reflecting supply chain and handling preferences only.

Parameter Comparison

Engineering Selection Recommendations

Both the S-80837CLUA-B6WT2G and S-80837CLUA-B6WT2U are active products from ABLIC Inc. with identical electrical and mechanical specifications. Selection between these parts should be based on procurement and assembly requirements:

The S-80837CLUA-B6WT2G in Tape & Reel format is suitable for high-volume automated assembly operations where continuous reel feeding is required. The S-80837CLUA-B6WT2U in Cut Tape format is appropriate for lower-volume applications, manual assembly processes, or situations where partial reel quantities are needed.

Both parts meet ROHS3 compliance and REACH unaffected status, ensuring regulatory alignment for industrial and consumer applications. The MSL rating of 1 (Unlimited) indicates no moisture sensitivity restrictions during storage and handling.

Frequently Asked Questions (FAQ)

Q: Can S-80837CLUA-B6WT2U be used as a direct replacement for S-80837CLUA-B6WT2G?

A: Yes. Both parts are electrically and mechanically identical. The only difference is the packaging format (Tape & Reel versus Cut Tape). They share the same die, threshold voltage (3.7V), output configuration (Push-Pull, Totem Pole), reset polarity (Active Low), and operating temperature range (-40°C ~ 85°C).

Q: What is the difference between Tape & Reel and Cut Tape packaging?

A: Tape & Reel (TR) packaging supplies components on a continuous reel suitable for automated pick-and-place assembly. Cut Tape (CT) packaging provides components on tape segments, typically used for lower-volume applications or manual assembly. Both formats contain the same component in the SOT-89-3 package.

Q: Are there any compliance or certification differences between these parts?

A: No. Both parts are ROHS3 compliant, REACH unaffected, and carry identical MSL ratings of 1 (Unlimited). They meet the same regulatory and environmental standards.

Q: Which part should I select for my application?

A: Selection depends on your assembly process. For automated high-volume production, use the Tape & Reel format (S-80837CLUA-B6WT2G). For manual assembly, prototyping, or lower-volume production, use the Cut Tape format (S-80837CLUA-B6WT2U).

Q: Is the SOT-89-3 package compatible with standard PCB assembly equipment?

A: Yes. The SOT-89-3 package (TO-243AA case) is a standard surface mount package compatible with conventional pick-and-place and reflow soldering equipment used in PCB assembly.