S-80826CLMC-B6LT2G Equivalent & Substitute Parts

Part Overview

The S-80826CLMC-B6LT2G is a voltage detector supervisor IC manufactured by ABLIC Inc., classified as a Power Management (PMIC) component. This single-channel supervisor operates with a 2.6V threshold and provides push-pull, totem pole output with active low reset functionality. The device is housed in an SC-74A (SOT-753) package configured for surface mount applications and is supplied in Tape & Reel packaging. With 609 units in current inventory and Active product status, this component serves critical voltage monitoring functions in power management circuits. Equivalent substitute parts are available to support design flexibility, inventory optimization, and supply chain continuity.

Key Parameters

Parameter	Value
Manufacturer Part Number	S-80826CLMC-B6LT2G
Manufacturer	ABLIC Inc.
Category	Power Management (PMIC)
Type	Voltage Detector
Number of Voltages Monitored	1
Voltage - Threshold	2.6V
Output Configuration	Push-Pull, Totem Pole
Reset Function	Active Low
Operating Temperature Range	-40°C ~ 85°C (TA)
Package / Case	SC-74A, SOT-753
Supplier Device Package	SOT-23-5
Mounting Type	Surface Mount
RoHS Status	ROHS3 Compliant
Moisture Sensitivity Level (MSL)	1 (Unlimited)
REACH Status	REACH Unaffected
Product Status	Active

Substitute Part Grouping Explanation

Substitute parts for the S-80826CLMC-B6LT2G are determined by strict equivalence across the following critical parameters:

Voltage Threshold: 2.6V (single monitored voltage)
Output Type: Push-Pull, Totem Pole configuration
Reset Logic: Active Low
Package: SC-74A (SOT-753) / SOT-23-5
Mounting: Surface Mount
Operating Temperature: -40°C ~ 85°C (TA)
Compliance: ROHS3 Compliant, REACH Unaffected

The substitute parts S-1000C26-M5T1U and S-1002CA26I-M5T1U meet all these electrical and mechanical parameters. Differences in base product series (S-808xxC vs. S-1000 vs. S-1002) and packaging format (Tape & Reel vs. Cut Tape) do not affect functional equivalence for voltage detection and reset supervision applications.

Parameter Comparison

Parameter	S-80826CLMC-B6LT2G	S-1000C26-M5T1U	S-1002CA26I-M5T1U
Manufacturer	ABLIC Inc.	ABLIC Inc.	ABLIC Inc.
Category	Power Management (PMIC)	Power Management (PMIC)	Power Management (PMIC)
Type	Voltage Detector	Voltage Detector	Voltage Detector
Number of Voltages Monitored	1	1	1
Voltage - Threshold	2.6V	2.6V	2.6V
Output Configuration	Push-Pull, Totem Pole	Push-Pull, Totem Pole	Push-Pull, Totem Pole
Reset Function	Active Low	Active Low	Active Low
Operating Temperature Range	-40°C ~ 85°C (TA)	-40°C ~ 85°C (TA)	-40°C ~ 85°C (TA)
Package / Case	SC-74A, SOT-753	SC-74A, SOT-753	SC-74A, SOT-753
Supplier Device Package	SOT-23-5	SOT-23-5	SOT-23-5
Mounting Type	Surface Mount	Surface Mount	Surface Mount
RoHS Status	ROHS3 Compliant	ROHS3 Compliant	ROHS3 Compliant
Moisture Sensitivity Level (MSL)	1 (Unlimited)	1 (Unlimited)	1 (Unlimited)
REACH Status	REACH Unaffected	REACH Unaffected	REACH Unaffected
Product Status	Active	Active	Active
Packaging Format	Tape & Reel (TR)	Cut Tape (CT)	Cut Tape (CT)
Current Inventory	609 Pcs	2880 Pcs	993 Pcs

Engineering Selection Recommendations

All three parts—S-80826CLMC-B6LT2G, S-1000C26-M5T1U, and S-1002CA26I-M5T1U—are Active products from ABLIC Inc. with identical electrical specifications and compliance certifications (ROHS3 Compliant, REACH Unaffected). Selection between these parts is based on packaging and inventory availability:

S-80826CLMC-B6LT2G: Primary choice when Tape & Reel packaging is required for automated assembly processes.
S-1000C26-M5T1U: Alternative when Cut Tape packaging is acceptable and higher inventory availability (2880 units) is advantageous.
S-1002CA26I-M5T1U: Alternative when Cut Tape packaging is acceptable and mid-range inventory (993 units) meets project requirements.

All three parts are functionally interchangeable in voltage detection and reset supervision applications requiring 2.6V threshold monitoring with push-pull output and active low reset logic.

Frequently Asked Questions (FAQ)

Q: Can S-1000C26-M5T1U or S-1002CA26I-M5T1U be used as direct replacements for S-80826CLMC-B6LT2G?

A: Yes. Both substitute parts meet all electrical and mechanical parameters: 2.6V threshold, push-pull totem pole output, active low reset, SOT-23-5 package, and identical operating temperature range. The primary difference is packaging format (Cut Tape vs. Tape & Reel).

Q: What is the difference between Tape & Reel and Cut Tape packaging?

A: Tape & Reel (TR) packaging is optimized for high-volume automated assembly with continuous reel feeding. Cut Tape (CT) packaging provides individual component strips suitable for lower-volume or manual assembly processes. Both formats contain the same component in the same SOT-23-5 package.

Q: Are there any electrical differences between the three parts?

A: No. All three parts share identical voltage threshold (2.6V), output configuration (push-pull, totem pole), reset logic (active low), and operating temperature range (-40°C ~ 85°C).

Q: Which part should be selected for new designs?

A: Any of the three parts is suitable for new designs. Selection depends on assembly process requirements (Tape & Reel vs. Cut Tape) and inventory availability. All parts are Active products with full compliance certifications.

Q: Are moisture sensitivity or RoHS compliance different between these parts?

A: No. All three parts have identical Moisture Sensitivity Level (MSL 1 - Unlimited) and are ROHS3 Compliant with REACH Unaffected status.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message