S6012DTP Equivalent & Substitute Parts

Part Overview

The S6012DTP is a 600V, 12A standard recovery SCR (silicon-controlled rectifier) manufactured by Littelfuse Inc. in TO-252 (DPAK) surface mount packaging. This thyristor is designed for general-purpose switching and control applications requiring reliable gate triggering and thermal performance across industrial temperature ranges. The part is active in production status with ROHS3 compliance and unlimited moisture sensitivity rating.

Substitute parts are identified when equivalent electrical performance can be maintained within the specified parameter tolerances while meeting the same packaging and environmental requirements. Alternative sources and packaging formats are available from both Littelfuse and STMicroelectronics.

Key Parameters

Parameter	S6012DTP Value	Unit
Voltage - Off State	600	V
Current - On State (It RMS)	12	A
Voltage - Gate Trigger (Vgt) Max	1.5	V
Current - Gate Trigger (Igt) Max	20	mA
Voltage - On State (Vtm) Max	1.6	V
Current - Hold (Ih) Max	40	mA
SCR Type	Standard Recovery	—
Operating Temperature	-40 to 125	°C
Package / Case	TO-252-3 (DPAK)	—
Mounting Type	Surface Mount	—

Substitute Part Grouping Explanation

Substitution eligibility for the S6012DTP is determined by the following criteria:

Primary Matching Parameters:

Voltage rating: 600V off-state voltage
Current rating: 12A RMS on-state current
SCR type: Standard Recovery (not Sensitive Gate variants)
Package: TO-252-3 (DPAK) surface mount
Gate trigger characteristics: Vgt ≤ 1.5V, Igt ≤ 20mA

Substitution Categories:

Direct Equivalents (Same Manufacturer, Different Packaging): MCR12DCMT4G (Littelfuse, Tape & Reel) maintains identical electrical specifications with alternative packaging format.
Cross-Manufacturer Equivalents (STMicroelectronics): TN1215-600B, TN1215-600B-TR, and TN1205T-600B-TR meet all electrical parameters within tolerance and share identical package specifications.
Higher Current Capability (Uprating): TN1515-600B-TR provides 15A RMS capability while maintaining 600V rating and compatible gate characteristics, suitable for applications requiring additional current margin.
Lower Current Variants (Downrating): MCR8DCMT4G and TN805-600B-TR provide 8A RMS capability; these are suitable only for applications with reduced current requirements.
Sensitive Gate Variants (Not Recommended as Direct Substitutes): MCR12DSMT4G and TS1220-600B feature Sensitive Gate technology with significantly lower gate trigger current (200µA vs. 20mA) and reduced hold current; these require circuit redesign and are not interchangeable without verification.

Parameter Comparison

Parameter	S6012DTP	MCR12DCMT4G	TN1215-600B	TN1215-600B-TR	TN1205T-600B-TR	TN1515-600B-TR	MCR8DCMT4G	TN805-600B-TR
Voltage - Off State (V)	600	600	600	600	600	600	600	600
Current - On State RMS (A)	12	12	12	12	12	15	8	8
Voltage - Gate Trigger Max (V)	1.5	1.0	1.3	1.3	1.3	1.3	1.0	1.3
Current - Gate Trigger Max (mA)	20	20	15	15	5	15	0.015	5
Voltage - On State Max (V)	1.6	1.9	1.6	1.6	1.6	1.6	1.8	1.6
Current - Hold Max (mA)	40	40	40	40	15	40	30	25
SCR Type	Standard Recovery	Standard Recovery	Standard Recovery	Standard Recovery	Standard Recovery	Standard Recovery	Standard Recovery	Standard Recovery
Operating Temperature (°C)	-40 to 125	-40 to 125	-40 to 125	-40 to 125	-40 to 125	-40 to 125	-40 to 125	-40 to 125
Package	TO-252 (DPAK)	TO-252 (DPAK)	TO-252 (DPAK)	TO-252 (DPAK)	TO-252 (DPAK)	TO-252 (DPAK)	TO-252 (DPAK)	TO-252 (DPAK)
RoHS Status	ROHS3 Compliant	ROHS3 Compliant	ROHS3 Compliant	ROHS3 Compliant	ROHS3 Compliant	ROHS3 Compliant	ROHS3 Compliant	ROHS3 Compliant

Engineering Selection Recommendations

Direct Substitution (No Circuit Modification Required):

MCR12DCMT4G, TN1215-600B, TN1215-600B-TR, and TN1205T-600B-TR are electrically equivalent to S6012DTP. All maintain 600V/12A ratings, standard recovery characteristics, and compatible gate trigger parameters. Selection among these options depends on packaging availability (Tube vs. Tape & Reel) and inventory status. All parts carry ROHS3 compliance and unlimited moisture sensitivity rating.

Uprating Application (Higher Current Margin):

TN1515-600B-TR provides 15A RMS capability while maintaining 600V rating and standard recovery type. This part is suitable for applications where additional current headroom is required. Gate trigger parameters remain compatible with S6012DTP control circuits.

Downrating Application (Reduced Current Requirement):

MCR8DCMT4G and TN805-600B-TR provide 8A RMS capability. These parts are suitable only for applications with confirmed current requirements below 8A RMS. Gate trigger parameters remain within acceptable ranges for standard control circuits.

Not Recommended as Direct Substitutes:

MCR12DSMT4G and TS1220-600B employ Sensitive Gate technology with gate trigger current of 200µA (versus 20mA for standard recovery). These parts require circuit redesign and gate drive circuit modification. Use only when Sensitive Gate characteristics are specifically required.

Frequently Asked Questions (FAQ)

Q: Can MCR12DCMT4G replace S6012DTP in existing designs?

A: Yes. MCR12DCMT4G is electrically equivalent with identical 600V/12A ratings and standard recovery characteristics. The primary difference is packaging format (Tape & Reel vs. Tube). No circuit modification is required.

Q: What is the difference between standard recovery and sensitive gate SCRs?

A: Standard recovery SCRs (S6012DTP, TN1215-600B) require gate trigger current up to 20mA. Sensitive gate variants (MCR12DSMT4G, TS1220-600B) require only 200µA gate trigger current. Sensitive gate parts cannot be substituted without redesigning the gate drive circuit.

Q: Can TN1515-600B-TR be used instead of S6012DTP?

A: TN1515-600B-TR can be used in applications where the higher 15A RMS rating provides additional safety margin. The 600V rating and standard recovery type are maintained. Gate trigger parameters are compatible with existing control circuits. No circuit modification is required.

Q: Are all substitute parts ROHS3 compliant?

A: Yes. All listed substitute parts carry ROHS3 compliance and unlimited moisture sensitivity rating (MSL 1), matching the environmental qualification of S6012DTP.

Q: What is the difference between TN1215-600B and TN1215-600B-TR?

A: Both parts are electrically identical. TN1215-600B is supplied in Tube packaging; TN1215-600B-TR is supplied in Tape & Reel format. Selection depends on assembly process requirements and inventory management preferences.

Q: Can MCR8DCMT4G replace S6012DTP?

A: MCR8DCMT4G is suitable only for applications with confirmed current requirements of 8A RMS or less. The 600V rating and standard recovery type are maintained. This represents a downrating and should be used only when application current requirements are verified below 8A RMS.

Q: What is the operating temperature range for all substitute parts?

A: All substitute parts operate across -40°C to 125°C, matching the S6012DTP specification. This range is suitable for industrial applications.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message