S34ML02G104TFI010 Equivalent & Substitute Parts

Part Overview

The S34ML02G104TFI010 is a 2Gbit parallel NAND Flash memory IC manufactured by Cypress Semiconductor Corp in a 48-TSOP package. This non-volatile memory device operates at 2.7V to 3.6V supply voltage with a write cycle time of 25ns and supports industrial temperature ranges from -40°C to 85°C. The part is ROHS3 compliant and carries an MSL rating of 3 (168 Hours). Finding equivalent substitute parts is necessary to ensure design flexibility, manage supply chain continuity, and maintain component availability across manufacturing cycles.

Substiute Parts

S34ML02G104TFI010

Cypress Semiconductor CorpIn Stock: 1493S34ML02G104TFI010 Datasheet

Current PartRFQ

IS34ML02G084-TLI

ISSI, Integrated Silicon Solution IncIn Stock: 1151IS34ML02G084-TLI Datasheet

DirectRFQ

MT29F2G08ABAEAWP-IT:E TR

Micron Technology Inc.In Stock: 63294MT29F2G08ABAEAWP-IT:E TR Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the S34ML02G104TFI010 are qualified based on the following critical parameters:

• Memory Size: 2Gbit (exact match required)
• Memory Format: FLASH (exact match required)
• Technology: FLASH - NAND (exact match required)
• Memory Interface: Parallel (exact match required)
• Package / Case: 48-TFSOP with 0.724" width and 18.40mm dimensions (exact match required)
• Voltage - Supply: 2.7V ~ 3.6V (exact match required)
• Operating Temperature: -40°C ~ 85°C (exact match required)
• Mounting Type: Surface Mount (exact match required)
• RoHS Status: ROHS3 Compliant (exact match required)
• Moisture Sensitivity Level: 3 (168 Hours) (exact match required)

Two substitute parts meet these criteria: IS34ML02G084-TLI (ISSI) and MT29F2G08ABAEAWP-IT:E TR (Micron Technology Inc.).

Parameter Comparison

Engineering Selection Recommendations

Both substitute parts maintain active product status and full compliance with ROHS3 and REACH requirements, matching the original S34ML02G104TFI010 specification.

The IS34ML02G084-TLI from ISSI provides a direct functional equivalent with identical write cycle time (25ns) and memory organization of 256M x 8. This part is available in Tray packaging with 1130 pieces in stock.

The MT29F2G08ABAEAWP-IT:E TR from Micron Technology Inc. is available in Cut Tape (CT) & Digi-Reel® packaging with significantly higher inventory (63200 pieces) and carries DiGi-Electronics Programmable verification. Write cycle time is not specified for this part. This part is available in 48-TSOP I supplier device package configuration.

Both parts satisfy all critical electrical and mechanical parameters required for substitution. Selection between them depends on packaging format requirements and inventory availability for your application.

Frequently Asked Questions (FAQ)

Q: Can IS34ML02G084-TLI replace S34ML02G104TFI010 in my design?

A: Yes. The IS34ML02G084-TLI meets all critical parameter requirements: 2Gbit capacity, parallel NAND Flash interface, 48-TFSOP package, 2.7V to 3.6V supply voltage, -40°C to 85°C operating temperature, 25ns write cycle time, ROHS3 compliance, and MSL 3 rating. The memory organization differs (256M x 8 versus 128M x 16), but both configurations support 2Gbit total capacity.

Q: What is the difference between the two substitute parts?

A: IS34ML02G084-TLI is supplied in Tray packaging, while MT29F2G08ABAEAWP-IT:E TR is supplied in Cut Tape (CT) & Digi-Reel® packaging. The Micron part has significantly higher inventory availability (63200 pieces versus 1130 pieces) and carries DiGi-Electronics Programmable verification. Write cycle time is specified as 25ns for the ISSI part but is not specified for the Micron part.

Q: Are there any package compatibility concerns?

A: No. All three parts use the 48-TFSOP package with identical dimensions (0.724" width, 18.40mm). Surface mount compatibility is maintained across all options.

Q: Do all parts meet compliance requirements?

A: Yes. All three parts are ROHS3 compliant, REACH unaffected, carry MSL 3 (168 Hours) ratings, and maintain active product status.

Q: What is the memory organization difference between these parts?

A: The S34ML02G104TFI010 uses 128M x 16 organization, while both substitute parts use 256M x 8 organization. Both configurations deliver 2Gbit total memory capacity and support parallel interface operation.