Equivalent & Substitute Parts for S2M-M3/52T

Part Overview

The S2M-M3/52T is a general-purpose rectifier diode manufactured by Vishay General Semiconductor - Diodes Division. This surface mount diode is rated for 1000 V DC reverse voltage with 1.5 A average rectified current in a DO-214AA (SMB) package. The device is currently active in production with ROHS3 compliance and unlimited moisture sensitivity rating.

Substitute parts are necessary when the original part number becomes unavailable, when alternative packaging formats are required for manufacturing processes, or when automotive-grade qualification is mandated for specific applications.

Key Parameters

Parameter	Value	Unit
Voltage - DC Reverse (Vr) (Max)	1000	V
Current - Average Rectified (Io)	1.5	A
Voltage - Forward (Vf) (Max) @ If	1.15 @ 1.5	V @ A
Reverse Recovery Time (trr)	2	µs
Current - Reverse Leakage @ Vr	1	µA @ 1000 V
Capacitance @ Vr, F	16	pF @ 4V, 1MHz
Package / Case	DO-214AA, SMB	—
Mounting Type	Surface Mount	—
Operating Temperature - Junction	-55 to 150	°C
Technology	Standard	—
RoHS Status	ROHS3 Compliant	—

Substitute Part Grouping Explanation

Substitute parts for the S2M-M3/52T are classified into two categories based on electrical and mechanical compatibility:

Parametric Equivalents maintain identical electrical specifications: 1000 V reverse voltage, 1.5 A average rectified current, 1.15 V forward voltage at 1.5 A, 2 µs reverse recovery time, and DO-214AA (SMB) package. These parts differ only in packaging format (Tape & Reel versus Cut Tape) or automotive qualification level. Parametric equivalents are direct functional replacements with no circuit redesign required.

Manufacturer Recommended Alternatives share the same base product family (S2M series) or similar electrical characteristics but may differ in one or more key parameters including reverse voltage rating, average rectified current, package type, or recovery speed. These alternatives require circuit-level evaluation to confirm suitability for the specific application.

The critical parameters determining substitution eligibility are:

Voltage - DC Reverse (Vr) (Max): Must equal or exceed 1000 V
Current - Average Rectified (Io): Must equal or exceed 1.5 A
Package / Case: DO-214AA (SMB) preferred for direct mechanical compatibility
Mounting Type: Surface Mount required
Operating Temperature Range: Must encompass -55°C to 150°C

Parameter Comparison

Part Number	Manufacturer	Vr (Max) [V]	Io [A]	Vf (Max) @ If [V]	trr [µs]	Ir @ Vr [µA]	Package	Packaging Format	Grade
S2M-M3/52T	Vishay	1000	1.5	1.15 @ 1.5	2	1 @ 1000	DO-214AA	Tape & Reel	Standard
S2M-E3/52T	Vishay	1000	1.5	1.15 @ 1.5	2	1 @ 1000	DO-214AA	Cut Tape	Standard
S2M-E3/5BT	Vishay	1000	1.5	1.15 @ 1.5	2	1 @ 1000	DO-214AA	Tape & Reel	Standard
S2MHE3_A/H	Vishay	1000	1.5	1.15 @ 1.5	2	1 @ 1000	DO-214AA	Tape & Reel	Automotive (AEC-Q101)
S2MHE3_A/I	Vishay	1000	1.5	1.15 @ 1.5	2	1 @ 1000	DO-214AA	Tape & Reel	Automotive (AEC-Q101)
S1K	YAGEO	800	1.1	—	—	—	DO-214AC	Tape & Reel	Standard
S1M	EVVO Semi	1000	1	1.1 @ 1	—	5 @ 1000	DO-214AC	Cut Tape & Digi-Reel	Standard
S2K	Diotec Semiconductor	800	2	1.15 @ 2	1.5	5 @ 800	DO-214AA	Tape & Reel	Standard
S2M	MDD	1000	2	1.15 @ 2	—	—	SOD-214AC	—	Standard
S2M-LTP	Micro Commercial Co	1000	2	1.15 @ 2	—	5 @ 1000	DO-214AA	Tape & Reel	Standard
S3KB	Taiwan Semiconductor Corporation	800	3	1.15 @ 3	1.5	10 @ 800	DO-214AA	Cut Tape & Digi-Reel	Standard

Engineering Selection Recommendations

Direct Parametric Equivalents (Preferred for Direct Substitution)

The S2M-E3/52T, S2M-E3/5BT, S2MHE3_A/H, and S2MHE3_A/I are parametric equivalents with identical electrical performance to the S2M-M3/52T. All four parts maintain 1000 V reverse voltage, 1.5 A average rectified current, and DO-214AA package compatibility. The S2M-E3/52T differs only in Cut Tape packaging format. The S2M-E3/5BT maintains Tape & Reel format identical to the main part. The S2MHE3_A/H and S2MHE3_A/I variants include automotive-grade qualification to AEC-Q101 standard, suitable for applications requiring automotive reliability certification.

Automotive-Grade Selection

When automotive qualification is required, S2MHE3_A/H and S2MHE3_A/I are the appropriate selections. Both maintain full electrical equivalence to the S2M-M3/52T while providing AEC-Q101 certification. Inventory availability is 36,600 units for S2MHE3_A/H and 6,807 units for S2MHE3_A/I.

Alternative Selections with Parameter Deviations

The S2M-LTP (Micro Commercial Co) provides 1000 V reverse voltage and DO-214AA package compatibility but is rated for 2 A average rectified current, exceeding the 1.5 A requirement. This part is suitable for applications where higher current capacity provides design margin. The S2M-LTP employs fast recovery technology (≤500 ns) compared to the standard recovery (>500 ns) of the main part.

The S1M (EVVO Semi) maintains 1000 V reverse voltage but is rated for 1 A average rectified current, below the 1.5 A specification. This part is not suitable as a direct substitute due to insufficient current rating.

The S2K (Diotec Semiconductor) and S3KB (Taiwan Semiconductor Corporation) are rated for 800 V reverse voltage, below the 1000 V requirement of the main part. These parts are not suitable for applications requiring full 1000 V rating.

The S1K (YAGEO) is rated for 800 V reverse voltage and 1.1 A average rectified current, falling below both the voltage and current specifications of the S2M-M3/52T.

The S2M (MDD) is rated for 1000 V and 2 A but uses SOD-214AC package instead of DO-214AA, requiring mechanical redesign of the circuit board layout.

Compliance and Certification

All parametric equivalent parts maintain ROHS3 compliance and unlimited moisture sensitivity rating (MSL 1), matching the environmental and regulatory status of the S2M-M3/52T. All parts are classified as active products in current production.

Frequently Asked Questions (FAQ)

Q: Can S2M-E3/52T be used as a direct replacement for S2M-M3/52T?

A: Yes. The S2M-E3/52T is a parametric equivalent with identical electrical specifications (1000 V, 1.5 A, 1.15 V forward voltage, 2 µs recovery time) and DO-214AA package. The only difference is packaging format: S2M-E3/52T is supplied in Cut Tape format while S2M-M3/52T is supplied in Tape & Reel format. Both are suitable for surface mount assembly.

Q: What is the difference between S2M-E3/5BT and S2M-M3/52T?

A: Both parts are parametric equivalents with identical electrical performance and Tape & Reel packaging. The difference lies in the internal product designation suffix. Both maintain 1000 V reverse voltage, 1.5 A average rectified current, and DO-214AA package compatibility.

Q: When should I select S2MHE3_A/H or S2MHE3_A/I instead of the standard S2M-M3/52T?

A: Select the S2MHE3_A/H or S2MHE3_A/I variants when your application requires automotive-grade qualification to AEC-Q101 standard. These parts maintain identical electrical specifications to the S2M-M3/52T while providing automotive reliability certification. Use these parts for automotive, industrial, or mission-critical applications where enhanced qualification is mandated.

Q: Can S2M-LTP be used as a substitute?

A: The S2M-LTP is electrically compatible with the S2M-M3/52T for applications where higher current capacity is acceptable. The S2M-LTP is rated for 2 A average rectified current compared to 1.5 A for the main part, and both maintain 1000 V reverse voltage and DO-214AA package. However, the S2M-LTP employs fast recovery technology (≤500 ns) versus standard recovery (>500 ns) for the main part. Verify that the faster recovery time does not introduce switching noise or other circuit-level effects in your specific application.

Q: Why is S1M not recommended as a substitute?

A: The S1M is rated for 1 A average rectified current, which is below the 1.5 A requirement of the S2M-M3/52T. Additionally, the S1M uses DO-214AC (SMA) package instead of DO-214AA (SMB), requiring mechanical redesign of the circuit board layout. The S1M is not suitable as a direct replacement.

Q: Can S2K or S3KB be used instead of S2M-M3/52T?

A: No. Both S2K and S3KB are rated for 800 V reverse voltage, which is below the 1000 V specification of the S2M-M3/52T. These parts are not suitable for applications requiring full 1000 V reverse voltage rating. Use these parts only in circuits designed for 800 V maximum reverse voltage.

Q: What is the difference between DO-214AA and DO-214AC packages?

A: DO-214AA (SMB) and DO-214AC (SMA) are different surface mount diode packages with different physical dimensions and pin configurations. DO-214AA is larger than DO-214AC. Parts using different packages require different circuit board layouts and cannot be directly substituted without mechanical redesign. The S2M-M3/52T uses DO-214AA package.

Q: Are all substitute parts ROHS3 compliant?

A: Yes. All parametric equivalent parts (S2M-E3/52T, S2M-E3/5BT, S2MHE3_A/H, S2MHE3_A/I) maintain ROHS3 compliance matching the S2M-M3/52T. All parts also maintain unlimited moisture sensitivity rating (MSL 1).

Q: What is the inventory status of the parametric equivalents?

A: S2M-M3/52T has 938 units in stock. S2M-E3/52T has 31,800 units available in Cut Tape format. S2M-E3/5BT has 26,000 units available in Tape & Reel format. S2MHE3_A/H has 36,600 units available with automotive qualification. S2MHE3_A/I has 6,807 units available with automotive qualification. The S2M-E3/52T and S2M-E3/5BT offer significantly higher inventory availability for high-volume production requirements.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message