S2307MP10TNF RF Antenna Equivalent & Substitute Parts

Part Overview

The S2307MP10TNF is a 2.4GHz panel RF antenna manufactured by TE Connectivity Laird, designed for WiMax™ applications. This component operates in the UHF frequency band (2GHz ~ 3GHz) with a center frequency of 2.4GHz and a frequency range of 2.3GHz ~ 2.5GHz. The antenna features a TNC Female chassis mount termination with 7.5dBi gain and a 254mm cable assembly.

Product Status: Obsolete. Due to the discontinued status of the S2307MP10TNF, equivalent substitute parts must be evaluated to maintain system functionality and ensure continued component availability for existing installations or legacy system support.

Substiute Parts

S2307MP10TNF

TE Connectivity LairdIn Stock: 1144S2307MP10TNF Datasheet

Current PartRFQ

S240790PA36RSM

TE Connectivity LairdIn Stock: 743S240790PA36RSM Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the S2307MP10TNF is determined by the following critical parameters:

Frequency Compatibility: The substitute part must operate within or encompass the 2.3GHz ~ 2.5GHz frequency range to maintain RF performance in the intended application band.

Antenna Type: Panel antenna configuration must be preserved to ensure mechanical and electrical compatibility with existing mounting structures.

Mounting Configuration: Chassis mount capability is required for direct replacement in the same installation environment.

Termination Interface: While the main part uses TNC Female termination, substitute parts may employ alternative RF connectors (such as RP-SMA Male) provided that the system design accommodates connector adaptation or replacement.

Electrical Performance: VSWR of 1.5 or better and gain specifications within acceptable operational ranges ensure signal integrity and system performance.

Regulatory Compliance: ECCN and HTSUS classifications must align with export control and tariff requirements.

The substitute part S240790PA36RSM meets these criteria with the following considerations: identical frequency group and center frequency, matching antenna type and chassis mount configuration, equivalent VSWR specification, and compliant regulatory classification.

Parameter Comparison

Engineering Selection Recommendations

Product Status Consideration: The S2307MP10TNF is classified as Obsolete, making the S240790PA36RSM a viable active alternative from the same manufacturer. The substitute part maintains Active product status, ensuring continued availability and manufacturer support.

Compliance and Certification: The S240790PA36RSM carries RoHS Compliant certification, meeting current environmental and regulatory standards. Both parts share identical ECCN (5A991G) and HTSUS (8529.10.9100) classifications, ensuring consistent export control and tariff treatment.

Frequency and Performance Alignment: Both antennas operate at the 2.4GHz center frequency within the UHF band. The substitute part's frequency range (2.4GHz ~ 2.5GHz) encompasses the upper portion of the main part's range (2.3GHz ~ 2.5GHz). Gain differential of 0.5dBi (7dBi vs. 7.5dBi) and identical VSWR specifications (1.5) indicate comparable RF performance characteristics.

Mechanical and Interface Differences: The substitute part features a lower profile (1.000" vs. 1.500") and longer cable assembly (914mm vs. 254mm). The termination connector differs from TNC Female to RP-SMA Male, requiring connector adaptation or cable replacement in the system design.

Selection Basis: Choose the S240790PA36RSM when component obsolescence necessitates replacement and the system design can accommodate the connector type change or when cable length and form factor adjustments are acceptable.

Frequently Asked Questions (FAQ)

Q: Can the S240790PA36RSM directly replace the S2307MP10TNF without modifications?

A: Direct mechanical and electrical replacement requires connector adaptation. The S240790PA36RSM uses RP-SMA Male termination while the S2307MP10TNF uses TNC Female. Cable length differs (914mm vs. 254mm), and physical height is reduced (1.000" vs. 1.500"). System integration must account for these differences.

Q: What is the frequency compatibility between these two antennas?

A: Both antennas operate at 2.4GHz center frequency within the UHF band. The S240790PA36RSM frequency range (2.4GHz ~ 2.5GHz) overlaps with the S2307MP10TNF range (2.3GHz ~ 2.5GHz). The substitute part does not cover the lower 2.3GHz ~ 2.4GHz portion of the original specification.

Q: Are there performance differences in gain and VSWR?

A: Gain differs by 0.5dBi (S240790PA36RSM: 7dBi; S2307MP10TNF: 7.5dBi). VSWR specifications are identical at 1.5 for both parts, indicating equivalent impedance matching characteristics.

Q: What regulatory compliance differences exist?

A: Both parts share identical ECCN (5A991G) and HTSUS (8529.10.9100) classifications. The S240790PA36RSM carries RoHS Compliant certification; RoHS status is not specified for the S2307MP10TNF.

Q: Why is the S2307MP10TNF obsolete?

A: Product obsolescence is determined by manufacturer discontinuation. The S240790PA36RSM maintains Active status, providing continued availability and manufacturer technical support.

Q: What connector type adaptation is required?

A: The S240790PA36RSM uses RP-SMA Male termination. Integration with systems designed for TNC Female connectors requires either RP-SMA to TNC adapter cables or complete cable assembly replacement.