S22P015S05 Hall Effect Current Sensor - Equivalent & Substitute Parts

Part Overview

The S22P015S05 is a Hall Effect closed-loop bidirectional current sensor manufactured by Tamura, designed for AC/DC current measurement applications up to 15A. This component operates as a 1-channel ratiometric voltage output module with a response time of 1µs and frequency range of DC to 100kHz. The part is classified as obsolete, necessitating identification of active equivalent and substitute components to maintain design continuity and ensure supply chain availability for new production and field replacements.

Substiute Parts

S22P015S05

TamuraIn Stock: 980S22P015S05 Datasheet

Current PartRFQ

S22P015S05M2

TamuraIn Stock: 1213S22P015S05M2 Datasheet

MFR RecommendedRFQ

S22P006S05M2

TamuraIn Stock: 1024S22P006S05M2 Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the S22P015S05 is determined by strict alignment of the following critical parameters:

Primary Substitution Criteria (Must Match):

• Sensor Type: Hall Effect, Closed Loop
• Number of Channels: 1
• For Measuring: AC/DC
• Output Type: Ratiometric, Voltage
• Frequency Range: DC ~ 100kHz
• Linearity: ±0.2%
• Voltage - Supply: 5V
• Response Time: 1µs
• Current - Supply (Max): 12.5mA
• Operating Temperature: -10°C ~ 85°C
• Polarization: Bidirectional
• Mounting Type: Through Hole
• Package / Case: Module
• RoHS Status: RoHS Compliant

Secondary Consideration (Product Availability):

• Product Status: Active preferred for new designs and ongoing supply

The substitute parts are grouped into two categories: MFR Recommended (direct replacement with identical current rating) and Parametric Equivalent (same electrical and mechanical specifications with different current sensing range).

Parameter Comparison

Engineering Selection Recommendations

For Direct Replacement (Recommended Primary Option):

The S22P015S05M2 is the manufacturer-recommended substitute for the obsolete S22P015S05. This part maintains identical electrical specifications, current sensing range (15A), and mechanical form factor. The S22P015S05M2 carries Active product status, ensuring long-term supply availability and compliance with current RoHS standards. This part is suitable for new production designs and field replacements where the original 15A current measurement range is required.

For Parametric Equivalent Substitution (Application-Dependent):

The S22P006S05M2 provides a parametric equivalent alternative when application requirements permit operation at a reduced current sensing range of 6A. This part maintains all electrical characteristics including frequency response, linearity, response time, and supply specifications. The S22P006S05M2 is appropriate for applications where the measured current does not exceed 6A and where the lower current range provides improved measurement resolution within the ratiometric output voltage window. This part also carries Active product status.

Both substitute parts are RoHS Compliant and manufactured by Tamura, ensuring regulatory compliance and design continuity.

Frequently Asked Questions (FAQ)

Q: Can the S22P015S05M2 be used as a direct replacement for the S22P015S05?

A: Yes. The S22P015S05M2 is the manufacturer-recommended direct replacement. All electrical parameters, current sensing range, output characteristics, and mechanical specifications are identical. The primary difference is product status: S22P015S05M2 is Active, ensuring supply availability.

Q: What is the difference between the S22P015S05M2 and S22P006S05M2?

A: The primary difference is the current sensing range. S22P015S05M2 measures up to 15A, while S22P006S05M2 measures up to 6A. All other parameters including frequency response (DC ~ 100kHz), linearity (±0.2%), response time (1µs), supply voltage (5V), and output type (Ratiometric, Voltage) are identical.

Q: Can I use the S22P006S05M2 in an application designed for the S22P015S05?

A: The S22P006S05M2 can be used only if the maximum current in your application does not exceed 6A. If your circuit requires measurement of currents above 6A, the S22P006S05M2 will saturate and provide inaccurate readings. For applications requiring 15A measurement capability, use the S22P015S05M2.

Q: Are both substitute parts RoHS Compliant?

A: Yes. Both S22P015S05M2 and S22P006S05M2 are RoHS Compliant, maintaining regulatory compliance with the original S22P015S05.

Q: What is the mounting configuration for these parts?

A: All three parts (S22P015S05, S22P015S05M2, and S22P006S05M2) use Through Hole mounting in a Module package configuration. No PCB layout modifications are required when substituting between these parts.

Q: Are there any differences in operating temperature range?

A: No. All three parts operate across the identical temperature range of -10°C to 85°C.

Q: What is the supply voltage requirement?

A: All three parts require a 5V supply voltage. Maximum supply current is 12.5mA for all variants.