Equivalent & Substitute Parts for S2-10R-T

Part Overview

The S2-10R-T is a ring terminal connector manufactured by Panduit Corp, classified as a flat-sided ring terminal designed for 1-2 AWG wire gauges with a #10 stud connection. This component features a crimp termination with funnel opening and is constructed from copper with tin contact finish. The S2-10R-T carries an obsolete product status, necessitating identification of functionally equivalent alternatives to maintain supply chain continuity for applications requiring this terminal specification.

Substiute Parts

S2-10R-T

Panduit CorpIn Stock: 828S2-10R-T Datasheet

Current PartRFQ

S2-10R-X

Panduit CorpIn Stock: 1002S2-10R-X Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the S2-10R-T is determined by strict equivalence across the following critical parameters:

Mechanical Compatibility Parameters:

• Stud/Tab Size: 10 Stud (determines mounting interface)
• Terminal Type: Flat Sided (determines physical form factor)
• Thickness: 0.110" (2.79mm)
• Width - Outer Edges: 0.700" (17.78mm)
• Length - Overall: 1.600" (40.64mm)

Electrical Compatibility Parameters:

• Wire Gauge: 1-2 AWG (determines wire termination capacity)
• Termination Type: Crimp, Funnel Opening (determines assembly method)
• Contact Material: Copper (determines electrical conductivity)
• Contact Finish: Tin (determines corrosion resistance and contact characteristics)

Regulatory Compliance Parameters:

• RoHS Status: ROHS3 Compliant
• REACH Status: REACH Unaffected
• ECCN: EAR99

The S2-10R-X qualifies as a direct substitute based on complete alignment across all mechanical, electrical, and regulatory parameters specified above.

Parameter Comparison

Engineering Selection Recommendations

The S2-10R-X serves as a direct functional equivalent to the S2-10R-T. Both components are manufactured by Panduit Corp and maintain identical specifications across all mechanical, electrical, and regulatory parameters. The S2-10R-X is currently available with 907 pieces in stock, compared to 746 pieces of the S2-10R-T.

Both parts carry obsolete product status and maintain ROHS3 compliance and REACH unaffected designation. The series designation differs between the two parts (Pan-Lug™ for S2-10R-T versus Pan-Term® for S2-10R-X); however, this distinction does not affect functional equivalence or interchangeability in applications requiring the specified electrical and mechanical characteristics.

Selection between these two parts should be based on inventory availability and procurement lead times, as both components satisfy identical application requirements.

Frequently Asked Questions (FAQ)

Q: Can the S2-10R-X replace the S2-10R-T in existing applications?

A: Yes. The S2-10R-X is functionally equivalent to the S2-10R-T across all critical parameters including stud size, wire gauge capacity, termination method, physical dimensions, and contact material specifications.

Q: What is the significance of the different series designations (Pan-Lug™ versus Pan-Term®)?

A: The series designation reflects internal Panduit Corp product line categorization. This distinction does not affect the mechanical or electrical performance of either component in applications requiring the specified terminal characteristics.

Q: Are both parts compliant with current regulatory requirements?

A: Both the S2-10R-T and S2-10R-X maintain ROHS3 compliance and REACH unaffected status, meeting current regulatory requirements for electronic component manufacturing and distribution.

Q: What wire gauges are compatible with these terminals?

A: Both terminals accommodate 1-2 AWG wire gauges. The crimp termination with funnel opening is designed specifically for this wire gauge range.

Q: What is the stud size for these ring terminals?

A: Both terminals feature a #10 stud connection point, determining the mounting interface for applications requiring this specific stud size.

Q: Are these terminals insulated?

A: No. Both the S2-10R-T and S2-10R-X are non-insulated ring terminals. Applications requiring insulation must incorporate separate insulation sleeves or use insulated terminal variants.

Q: What contact material and finish are used in these terminals?

A: Both terminals utilize copper contact material with tin finish, providing electrical conductivity and corrosion resistance suitable for general-purpose electrical connections.

Q: Why are both parts listed as obsolete?

A: Obsolete product status indicates that these components are no longer in active production by Panduit Corp. Current inventory represents remaining stock from previous manufacturing runs.