Riedon S2-0R075F8 Equivalent & Substitute Parts

Part Overview

The Riedon S2-0R075F8 is a 75 milliohm, 1% tolerance, 1-watt wirewound chip resistor in 2615 J-Lead package configuration. This component is designed for current sensing applications and features flame-proof, moisture-resistant, and pulse-withstanding characteristics. The part is classified as Active product status with full ROHS3 compliance and REACH affected designation. Substitute parts are identified when inventory constraints or supply chain requirements necessitate alternative sourcing while maintaining identical electrical and mechanical specifications.

Substiute Parts

S2-0R075F8

RiedonIn Stock: 1064S2-0R075F8 Datasheet

Current PartRFQ

S2-0R075F1

RiedonIn Stock: 1527S2-0R075F1 Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the S2-0R075F8 are qualified based on strict equivalence across all critical electrical and mechanical parameters. The substitution criteria are:

• Resistance value: 75 mOhms (exact match)
• Tolerance: ±1% (exact match)
• Power rating: 1W (exact match)
• Composition: Wirewound (exact match)
• Package configuration: 2615 J-Lead (exact match)
• Physical dimensions: 0.260" L x 0.154" W, height 0.142" max (exact match)
• Operating temperature range: -55°C ~ 275°C (exact match)
• Feature set: Current Sense, Flame Proof, Moisture Resistant, Pulse Withstanding, Safety (exact match)
• Compliance: ROHS3 Compliant, REACH Affected (exact match)

Only parts meeting all these parameters are classified as direct substitutes.

Parameter Comparison

Engineering Selection Recommendations

Both S2-0R075F8 and S2-0R075F1 are Active product status components manufactured by Riedon with identical electrical specifications, mechanical configurations, and compliance certifications. Selection between these parts is determined by availability and supply chain requirements rather than technical differentiation. Both parts satisfy ROHS3 compliance and REACH affected regulatory requirements. The interchangeability is absolute across all specified parameters.

Frequently Asked Questions (FAQ)

Q: Can S2-0R075F1 be used as a direct replacement for S2-0R075F8?

A: Yes. Both parts are electrically and mechanically identical with matching resistance values (75 mOhms ±1%), power ratings (1W), package configurations (2615 J-Lead), and operating temperature ranges (-55°C ~ 275°C). All compliance certifications and feature sets are equivalent.

Q: Are there any differences in the 2615 J-Lead package between these parts?

A: No. Both parts use identical 2615 J-Lead package specifications with matching physical dimensions (0.260" L x 0.154" W, 6.60mm x 3.90mm) and maximum seated height (0.142", 3.60mm).

Q: Do both parts have the same moisture sensitivity rating?

A: Yes. Both S2-0R075F8 and S2-0R075F1 are rated MSL 1 (Unlimited), indicating no moisture sensitivity restrictions.

Q: Are there compliance differences between these substitute parts?

A: No. Both parts carry identical ROHS3 compliance status and REACH affected designation.

Q: What determines the choice between S2-0R075F8 and S2-0R075F1?

A: Selection is based on inventory availability and supply chain logistics. Both parts are functionally and mechanically equivalent with no technical differentiation criteria.