S-202-CCTTHR Equivalent & Substitute Parts

Part Overview

The S-202-CCTTHR is a 2-position socket Jones connector manufactured by Cinch Connectivity Solutions, designed for free-hanging in-line applications with solder eyelet termination. This connector is classified as obsolete, making equivalent or substitute parts necessary for ongoing system maintenance, repairs, and new designs requiring compatible connectivity solutions.

Substiute Parts

S-202-CCTTHR

Cinch Connectivity SolutionsIn Stock: 917S-202-CCTTHR Datasheet

Current PartRFQ

S-2406H-AB

Cinch Connectivity SolutionsIn Stock: 828S-2406H-AB Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the S-202-CCTTHR is determined by the following critical parameters:

• Connector Type: Socket, Jones configuration
• Termination Method: Solder Eyelet(s)
• Insulation Material: Phenol Formaldehyde (Phenolic)
• Moisture Sensitivity Level: 1 (Unlimited)

The substitute part S-2406H-AB shares the same connector type (Socket, Jones), termination method (Solder Eyelet(s)), and insulation material (Phenol Formaldehyde). Both parts maintain MSL 1 rating. However, differences exist in mounting configuration, position count, and electrical ratings, which must be evaluated for specific application requirements.

Parameter Comparison

Engineering Selection Recommendations

The S-2406H-AB is an active product with RoHS compliance, addressing the obsolescence status of the S-202-CCTTHR. Both connectors maintain identical insulation material and moisture sensitivity ratings, ensuring compatibility in environmental conditions.

Selection of S-2406H-AB requires evaluation of the following differences:

• Mounting Configuration: The S-202-CCTTHR is free-hanging (in-line), while S-2406H-AB is panel-mounted. Application mechanical design must accommodate this difference.
• Position Count: The S-202-CCTTHR accommodates 2 positions in a single row; S-2406H-AB provides 6 positions in 2 rows. Circuit design must align with the increased position capacity.
• Fastening Mechanism: The S-202-CCTTHR uses threaded fastening; S-2406H-AB uses push-pull fastening. Connector engagement procedures differ accordingly.
• Electrical Specifications: S-2406H-AB provides specified voltage (250 V) and current (15 A) ratings with operating temperature to 105°C. Original part specifications were not provided for direct comparison.

Frequently Asked Questions (FAQ)

Q: Can S-2406H-AB directly replace S-202-CCTTHR in existing assemblies?

A: Direct replacement requires mechanical and electrical design verification. The mounting type differs (free-hanging versus panel-mount), and position count increases from 2 to 6. Connector footprint and circuit layout must be re-evaluated.

Q: Are both connectors compatible with the same mating plugs?

A: Both are Socket, Jones connectors with solder eyelet termination. Mating compatibility depends on the specific plug configuration and Jones connector series. Verify plug specifications against both socket variants.

Q: What is the significance of the RoHS compliance difference?

A: S-202-CCTTHR is RoHS non-compliant; S-2406H-AB is RoHS compliant. For applications subject to RoHS regulations, S-2406H-AB meets compliance requirements. Legacy systems may continue using non-compliant parts where regulations do not apply.

Q: How do the fastening types affect installation?

A: S-202-CCTTHR uses threaded fastening, requiring screw-based assembly. S-2406H-AB uses push-pull fastening, enabling quick-connect/disconnect operation. Installation procedures and tooling requirements differ.

Q: Are the insulation materials equivalent?

A: Both connectors use Phenol Formaldehyde (Phenolic) insulation with MSL 1 (Unlimited) rating. Insulation material compatibility is equivalent for environmental and moisture exposure conditions.

Q: What electrical parameters should be verified for substitution?

A: S-2406H-AB specifies 250 V voltage rating and 15 A current rating with 105°C operating temperature. Original S-202-CCTTHR specifications were not provided. Verify that application requirements do not exceed S-2406H-AB electrical limits.