S1711-06R RFI Shield Clip Equivalent & Substitute Parts

Part Overview

The S1711-06R is an RFI shield clip manufactured by Harwin Inc. as part of the EZ BoardWare series. This component is a surface-mount solder-attach shield clip designed for RF and wireless applications. The part is currently classified as obsolete, which necessitates identification of active equivalent alternatives to maintain design continuity and ensure supply chain availability for new production and repair applications.

Substiute Parts

S1711-06R

Harwin Inc.In Stock: 1188S1711-06R Datasheet

Current PartRFQ

S1711-46R

Harwin Inc.In Stock: 176598S1711-46R Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

The S1711-06R has one direct equivalent substitute: S1711-46R. Substitution is valid based on the following criteria:

Mechanical Compatibility:

• Identical dimensions (width, length, height)
• Same material composition (stainless steel)
• Identical plating specification (tin, 3.00µm thickness)
• Same attachment method (solder)

Electrical & Environmental Compatibility:

• Identical operating temperature range (-40°C to 125°C)
• Same moisture sensitivity level (MSL 1)
• Same series designation (EZ BoardWare)
• Identical functional classification (shield clip for RF and wireless applications)

Supply Status Distinction: The S1711-46R is the active production equivalent, available in Tape & Reel packaging with significantly higher inventory availability (176,506 pcs vs. 1,120 pcs for the obsolete S1711-06R).

Parameter Comparison

Engineering Selection Recommendations

For applications currently specified with S1711-06R, the S1711-46R is the direct functional and mechanical equivalent. The transition from S1711-06R to S1711-46R is supported by:

• Identical mechanical dimensions and material specifications
• Identical electrical performance parameters and operating temperature range
• Same solder attachment compatibility
• Active production status with established supply chain availability
• Tape & Reel packaging suitable for automated assembly processes

The S1711-46R maintains full compatibility with existing PCB designs and assembly processes specified for the S1711-06R. No design modifications are required for this substitution.

Frequently Asked Questions (FAQ)

Q: Can S1711-46R be used as a direct replacement for S1711-06R in existing designs?

A: Yes. The S1711-46R is mechanically and electrically identical to the S1711-06R. All dimensional, material, plating, and performance specifications are equivalent. No PCB layout or assembly process changes are required.

Q: What is the primary difference between these two part numbers?

A: The S1711-06R is obsolete, while the S1711-46R is the active production equivalent. The S1711-46R is supplied in Tape & Reel packaging, which is standard for high-volume manufacturing. Both parts are from the same EZ BoardWare series and share identical specifications.

Q: Are there any compliance or certification differences?

A: Both parts share the same environmental and regulatory classifications (MSL 1, REACH Unaffected, EAR99). The S1711-46R carries ROHS3 compliance, while the S1711-06R is RoHS non-compliant. Compliance requirements should be evaluated based on application and regional regulations.

Q: Is the Tape & Reel packaging of S1711-46R compatible with standard pick-and-place equipment?

A: Yes. Tape & Reel packaging is the standard format for automated surface-mount assembly. The S1711-46R packaging is compatible with conventional SMD assembly processes.

Q: What inventory considerations should be made when transitioning from S1711-06R to S1711-46R?

A: The S1711-46R has significantly higher inventory availability (176,506 pcs) compared to the obsolete S1711-06R (1,120 pcs). For new production, the S1711-46R is the recommended selection to ensure supply continuity.