S10MC V7G Equivalent & Substitute Parts

Part Overview

The S10MC V7G is a general-purpose rectifier diode manufactured by Taiwan Semiconductor Corporation, rated for 1000 V DC reverse voltage and 10 A average rectified current in a DO-214AB (SMC) surface mount package. This component is classified as discontinued at DiGi Electronics, necessitating identification of functionally equivalent alternatives for ongoing design requirements and procurement needs. The part operates across a junction temperature range of -55°C to 150°C and maintains ROHS3 compliance with unlimited moisture sensitivity rating.

Substiute Parts

S10MC V7G

Taiwan Semiconductor CorporationIn Stock: 1516S10MC V7G Datasheet

Current PartRFQ

S10MC

MDDIn Stock: 4069S10MC Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the S10MC V7G is determined by electrical and mechanical parameter equivalence within the general-purpose rectifier diode category. The following parameters establish substitution validity:

Critical Electrical Parameters:

• Voltage - DC Reverse (Vr) (Max): 1000 V
• Current - Average Rectified (Io): 10 A
• Voltage - Forward (Vf) (Max) @ If: 1.1 V @ 10 A
• Operating Temperature - Junction: -55°C to 150°C

Critical Mechanical Parameters:

• Mounting Type: Surface Mount
• Package / Case: DO-214AB / SMC form factor

Compliance Requirements:

• RoHS Status: ROHS3 Compliant
• Moisture Sensitivity Level (MSL): 1 (Unlimited)

Substitute parts must match all critical electrical parameters and maintain surface mount compatibility within the SMC package family. Compliance certifications must remain equivalent or superior.

Parameter Comparison

Engineering Selection Recommendations

The S10MC manufactured by MDD serves as a direct electrical equivalent to the discontinued S10MC V7G. Both components satisfy identical voltage and current specifications at 1000 V reverse and 10 A average rectified current, with matching forward voltage characteristics of 1.1 V at 10 A operation.

Compliance and Availability: The MDD S10MC maintains ROHS3 compliance and unlimited moisture sensitivity rating, ensuring regulatory equivalence. The substitute part carries active product status with 4000 pieces in stock, providing supply continuity for applications currently utilizing the Taiwan Semiconductor Corporation S10MC V7G.

Package Compatibility: Both parts employ surface mount SMC packaging within the DO-214AB / SOD-214AB family, maintaining mechanical and thermal interface compatibility with existing PCB layouts and assembly processes.

Capacitance Consideration: The substitute part exhibits 100 pF capacitance at 4V and 1 MHz, compared to 60 pF in the original part. This parameter difference does not affect substitution validity for general-purpose rectification applications within the specified electrical operating range.

Frequently Asked Questions (FAQ)

Q: Can the MDD S10MC directly replace the Taiwan Semiconductor Corporation S10MC V7G?

A: Yes. Both components meet identical electrical specifications for voltage (1000 V), current (10 A), and forward voltage (1.1 V @ 10 A). Surface mount SMC packaging ensures mechanical compatibility with existing designs.

Q: What is the significance of the capacitance difference between the two parts?

A: The substitute part (100 pF) exhibits higher capacitance than the original (60 pF) at 4V and 1 MHz. This parameter does not affect general-purpose rectification performance within the specified operating conditions.

Q: Are both parts RoHS compliant?

A: Yes. Both the S10MC V7G and the MDD S10MC are ROHS3 compliant with unlimited moisture sensitivity rating (MSL 1).

Q: What is the operating temperature range for both parts?

A: Both components operate across a junction temperature range of -55°C to 150°C, providing equivalent thermal performance specifications.

Q: Does the package designation difference (DO-214AB vs. SOD-214AB) affect compatibility?

A: No. Both designations refer to equivalent SMC surface mount package families with identical mechanical and thermal characteristics suitable for standard PCB assembly processes.

Q: What is the product status difference between the two parts?

A: The original S10MC V7G is discontinued at DiGi Electronics. The substitute MDD S10MC maintains active product status with confirmed inventory availability.