S10KL-TP Equivalent & Substitute Parts

Part Overview

The S10KL-TP is a general-purpose rectifier diode manufactured by Micro Commercial Co, rated for 800 V DC reverse voltage with 10 A average rectified current in a Surface Mount SMC (DO-214AB) package. This component is classified as Active and complies with ROHS3 and REACH standards. Substitute parts are identified when equivalent electrical performance and mechanical compatibility are required due to inventory constraints, supply chain considerations, or application-specific requirements within the allowed parameter ranges.

Substiute Parts

S10KL-TP

Micro Commercial CoIn Stock: 1150S10KL-TP Datasheet

Current PartRFQ

S5K-E3/57T

Vishay General Semiconductor - Diodes DivisionIn Stock: 15193S5K-E3/57T Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the S10KL-TP is permissible with the S5K-E3/57T based on the following alignment of critical electrical and mechanical parameters:

Matching Parameters:

• Voltage - DC Reverse (Vr) (Max): 800 V (identical)
• Current - Reverse Leakage @ Vr: 10 µA @ 800 V (identical)
• Speed: Standard Recovery >500ns, > 200mA (Io) (identical)
• Operating Temperature - Junction: -55°C to 150°C (identical)
• Package / Case: DO-214AB, SMC (identical)
• Mounting Type: Surface Mount (identical)
• Technology: Standard (identical)
• RoHS Status: ROHS3 Compliant (identical)
• Moisture Sensitivity Level (MSL): 1 (Unlimited) (identical)

Differing Parameter:

• Current - Average Rectified (Io): S10KL-TP rated at 10 A; S5K-E3/57T rated at 5 A

The S5K-E3/57T operates at a lower current rating and is suitable for applications where the full 10 A capacity of the S10KL-TP is not required. Both components share identical voltage, temperature, package, and recovery characteristics, establishing functional compatibility within reduced current specifications.

Parameter Comparison

Engineering Selection Recommendations

Both the S10KL-TP and S5K-E3/57T are Active products with full ROHS3 compliance and REACH Unaffected status, meeting current regulatory requirements for electronic component deployment. Selection between these parts is determined by application current requirements:

S10KL-TP Selection Criteria:

• Applications requiring 10 A average rectified current capacity
• Full utilization of the 800 V reverse voltage rating with maximum current handling

S5K-E3/57T Selection Criteria:

• Applications requiring 5 A or lower average rectified current
• Scenarios where the S10KL-TP is unavailable and current demand does not exceed 5 A
• Designs where thermal management or component stress reduction is a consideration within the 5 A operating envelope

Both components maintain identical voltage ratings, temperature ranges, package geometry, and recovery characteristics, ensuring mechanical and thermal compatibility in Surface Mount applications using DO-214AB footprints.

Frequently Asked Questions (FAQ)

Q: Can the S5K-E3/57T directly replace the S10KL-TP in all applications?

A: The S5K-E3/57T is suitable only for applications where the average rectified current requirement does not exceed 5 A. If the circuit design requires 10 A operation, the S5K-E3/57T will not provide adequate current capacity. Verify circuit current specifications before substitution.

Q: Are the package footprints identical between S10KL-TP and S5K-E3/57T?

A: Yes. Both components use the DO-214AB SMC package with identical Surface Mount footprints, allowing direct PCB placement compatibility without layout modifications.

Q: Do both parts operate across the same temperature range?

A: Yes. Both the S10KL-TP and S5K-E3/57T operate across the junction temperature range of -55°C to 150°C, providing identical thermal operating specifications.

Q: What is the reverse voltage rating for both parts?

A: Both components are rated for 800 V DC reverse voltage (Vr) with identical reverse leakage current of 10 µA at 800 V, ensuring equivalent voltage handling capability.

Q: Are both parts compliant with environmental and regulatory standards?

A: Yes. Both the S10KL-TP and S5K-E3/57T are ROHS3 Compliant, REACH Unaffected, and carry Moisture Sensitivity Level 1 (Unlimited), meeting current environmental and regulatory requirements.

Q: What is the primary difference between these two diodes?

A: The primary difference is the average rectified current rating. The S10KL-TP is rated for 10 A, while the S5K-E3/57T is rated for 5 A. All other electrical and mechanical parameters are identical.

Q: Can I use the S10KL-TP in place of the S5K-E3/57T?

A: Yes. The S10KL-TP can be used in applications designed for the S5K-E3/57T, as it provides higher current capacity (10 A versus 5 A) while maintaining all other identical specifications. No design modifications are required.