S10JL-TP Equivalent & Substitute Parts

Part Overview

The S10JL-TP is a general-purpose rectifier diode manufactured by Micro Commercial Co, rated for 600 V DC reverse voltage and 10 A average rectified current in a Surface Mount SMC (DO-214AB) package. This component is classified as Active product status and is RoHS3 compliant. Substitute parts are identified when equivalent electrical and mechanical parameters are required for applications where the primary part is unavailable, or when design specifications permit operation within the defined parameter ranges of alternative manufacturers' offerings.

Key Parameters

Parameter	Value	Unit
Voltage - DC Reverse (Vr) (Max)	600	V
Current - Average Rectified (Io)	10	A
Voltage - Forward (Vf) (Max) @ If	1.2 V @ 10 A	V
Current - Reverse Leakage @ Vr	10	µA @ 600 V
Speed	Standard Recovery >500ns, > 200mA (Io)	-
Operating Temperature - Junction	-55 to 150	°C
Package / Case	DO-214AB, SMC	-
Mounting Type	Surface Mount	-
RoHS Status	ROHS3 Compliant	-

Substitute Part Grouping Explanation

Substitute parts for the S10JL-TP are identified based on the following critical parameters that determine functional equivalence:

Voltage Rating Compatibility: All substitute parts must maintain the 600 V DC reverse voltage maximum rating to ensure safe operation in the intended application circuit.

Package Compatibility: All substitute parts utilize the DO-214AB SMC surface mount package, ensuring mechanical and thermal compatibility with existing PCB layouts and assembly processes.

Reverse Leakage Characteristics: Substitute parts are selected where reverse leakage current at 600 V does not exceed the specified maximum, maintaining circuit performance and reliability.

Temperature Range: Operating temperature ranges of substitute parts must encompass or exceed the application requirements within the -55°C to 150°C junction temperature window.

RoHS and REACH Compliance: All substitute parts maintain ROHS3 compliance and REACH Unaffected status, ensuring regulatory alignment with the primary part.

Current Rating Consideration: The substitute parts identified (MURS360T3G and RS3J-13-F) are rated for 3 A average rectified current, which is lower than the primary part's 10 A rating. These substitutes are applicable only in applications where the actual circuit current demand does not exceed 3 A.

Parameter Comparison

Parameter	S10JL-TP (Micro Commercial Co)	MURS360T3G (onsemi)	RS3J-13-F (Diodes Incorporated)
Voltage - DC Reverse (Vr) (Max)	600 V	600 V	600 V
Current - Average Rectified (Io)	10 A	3 A	3 A
Voltage - Forward (Vf) (Max) @ If	1.2 V @ 10 A	1.25 V @ 3 A	1.3 V @ 3 A
Current - Reverse Leakage @ Vr	10 µA @ 600 V	10 µA @ 600 V	5 µA @ 600 V
Speed	Standard Recovery >500ns, > 200mA (Io)	Fast Recovery =< 500ns, > 200mA (Io)	Fast Recovery =< 500ns, > 200mA (Io)
Operating Temperature - Junction	-55°C ~ 150°C	-65°C ~ 175°C	-65°C ~ 150°C
Package / Case	DO-214AB, SMC	DO-214AB, SMC	DO-214AB, SMC
Mounting Type	Surface Mount	Surface Mount	Surface Mount
RoHS Status	ROHS3 Compliant	ROHS3 Compliant	ROHS3 Compliant
REACH Status	REACH Unaffected	REACH Unaffected	REACH Unaffected

Engineering Selection Recommendations

Primary Part Selection: The S10JL-TP remains the preferred selection for applications requiring 10 A average rectified current at 600 V with standard recovery characteristics. Active product status and full RoHS3 compliance support long-term availability and regulatory alignment.

Substitute Selection Criteria: The MURS360T3G and RS3J-13-F are applicable substitutes only when circuit design specifications permit operation at 3 A or lower average rectified current. Both substitute parts maintain 600 V voltage rating compatibility and DO-214AB package compatibility.

MURS360T3G Selection: This onsemi part offers fast recovery characteristics (≤500 ns) with a reverse recovery time of 75 ns, providing improved switching performance compared to the standard recovery profile of the primary part. The extended operating temperature range (-65°C to 175°C) accommodates wider thermal environments. Active product status and ROHS3 compliance ensure supply continuity.

RS3J-13-F Selection: This Diodes Incorporated part provides the lowest reverse leakage current (5 µA @ 600 V) among the identified substitutes, with fast recovery characteristics and specified capacitance (50 pF @ 4 V, 1 MHz). Active product status and ROHS3 compliance support production deployment.

Compliance Verification: All identified parts maintain ROHS3 compliance and REACH Unaffected status, eliminating regulatory barriers to substitution within the specified parameter constraints.

Frequently Asked Questions (FAQ)

Q: Can MURS360T3G or RS3J-13-F be used as direct replacements for S10JL-TP in all applications?

A: No. The substitute parts are rated for 3 A average rectified current, compared to the primary part's 10 A rating. Substitution is valid only when the actual circuit current demand does not exceed 3 A. Exceeding this current rating will result in component failure and circuit malfunction.

Q: Are the substitute parts mechanically compatible with existing PCB layouts designed for S10JL-TP?

A: Yes. Both MURS360T3G and RS3J-13-F utilize the DO-214AB SMC package, which is mechanically and thermally identical to the S10JL-TP package. No PCB redesign is required for mechanical compatibility.

Q: What is the difference between standard recovery and fast recovery diodes?

A: The S10JL-TP features standard recovery (>500 ns), while MURS360T3G and RS3J-13-F feature fast recovery (≤500 ns). Fast recovery diodes exhibit shorter reverse recovery time, reducing switching losses and improving efficiency in high-frequency applications. Standard recovery diodes are suitable for lower-frequency rectification circuits.

Q: Do the substitute parts meet the same regulatory requirements as S10JL-TP?

A: Yes. All identified substitute parts maintain ROHS3 compliance and REACH Unaffected status, matching the regulatory profile of the primary part.

Q: What is the significance of reverse leakage current differences among the parts?

A: Reverse leakage current affects circuit performance in high-impedance applications and temperature stability. RS3J-13-F exhibits lower reverse leakage (5 µA @ 600 V) compared to S10JL-TP and MURS360T3G (both 10 µA @ 600 V), providing improved performance in sensitive analog circuits.

Q: Can forward voltage differences impact circuit performance?

A: Yes. Forward voltage drop affects power dissipation and voltage regulation. S10JL-TP exhibits 1.2 V @ 10 A, while MURS360T3G and RS3J-13-F exhibit 1.25 V @ 3 A and 1.3 V @ 3 A respectively. These differences are measured at different current levels and must be evaluated within the specific circuit operating point.

Q: What packaging options are available for these parts?

A: S10JL-TP is supplied in Tape & Reel (TR) packaging. MURS360T3G is available in Cut Tape (CT) & Digi-Reel® packaging. RS3J-13-F is supplied in Tape & Reel (TR) packaging. Packaging selection should align with assembly process requirements and inventory management practices.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message