S10CJ-M3/I Equivalent & Substitute Parts

Part Overview

The S10CJ-M3/I is a general-purpose rectifier diode manufactured by Vishay General Semiconductor - Diodes Division. This surface mount diode operates at 600 V DC reverse voltage with a 10 A average rectified current rating and is packaged in the DO-214AB (SMC) form factor. The device is classified as Active product status and complies with RoHS3 and REACH regulations.

Substitute parts are identified when equivalent electrical performance and mechanical compatibility are maintained across the specified parameter set. Alternative part numbers may be required due to inventory availability, supply chain considerations, or specific application certifications.

Key Parameters

Parameter	Value	Unit
Voltage - DC Reverse (Vr) (Max)	600	V
Current - Average Rectified (Io)	10	A
Voltage - Forward (Vf) (Max) @ If	1	V @ 10 A
Reverse Recovery Time (trr)	5	µs
Current - Reverse Leakage @ Vr	10	µA @ 400 V
Capacitance @ Vr, F	79	pF @ 4V, 1MHz
Package / Case	DO-214AB, SMC	—
Operating Temperature - Junction	-55 to 150	°C
Technology	Standard	—

Substitute Part Grouping Explanation

Substitution eligibility for the S10CJ-M3/I is determined by matching the following critical parameters:

Voltage Rating: DC reverse voltage must equal 600 V
Current Rating: Average rectified current must equal 10 A
Forward Voltage: Maximum forward voltage must equal 1 V at 10 A
Recovery Characteristics: Reverse recovery time must equal 5 µs
Package Type: Surface mount DO-214AB (SMC) form factor required
Operating Temperature Range: Junction temperature range must span -55°C to 150°C
Technology Classification: Standard recovery diode technology

The S10CJHM3/I meets all electrical and mechanical substitution criteria. This part maintains identical voltage, current, forward voltage, recovery time, and package specifications. The substitute part includes additional automotive-grade qualification (AEC-Q101) and enhanced reverse leakage specification at 600 V, representing a higher performance variant within the same electrical class.

Parameter Comparison

Parameter	S10CJ-M3/I	S10CJHM3/I	Match
Voltage - DC Reverse (Vr) (Max)	600 V	600 V	✓
Current - Average Rectified (Io)	10 A	10 A	✓
Voltage - Forward (Vf) (Max) @ If	1 V @ 10 A	1 V @ 10 A	✓
Reverse Recovery Time (trr)	5 µs	5 µs	✓
Current - Reverse Leakage @ Vr	10 µA @ 400 V	10 µA @ 600 V	✓
Capacitance @ Vr, F	79 pF @ 4V, 1MHz	79 pF @ 4V, 1MHz	✓
Package / Case	DO-214AB, SMC	DO-214AB, SMC	✓
Operating Temperature - Junction	-55°C to 150°C	-55°C to 150°C	✓
Technology	Standard	Standard	✓
RoHS Status	ROHS3 Compliant	ROHS3 Compliant	✓
REACH Status	REACH Unaffected	REACH Unaffected	✓

Engineering Selection Recommendations

Both the S10CJ-M3/I and S10CJHM3/I are Active product status components manufactured by Vishay General Semiconductor - Diodes Division. Both parts satisfy RoHS3 and REACH compliance requirements.

The S10CJHM3/I includes AEC-Q101 automotive qualification and Moisture Sensitivity Level (MSL) 1 rating, indicating suitability for automotive and high-reliability applications. The S10CJ-M3/I is specified for general-purpose industrial applications.

Selection between these parts depends on application requirements:

S10CJ-M3/I: General-purpose rectifier applications without automotive qualification requirements
S10CJHM3/I: Automotive-grade applications, high-reliability systems, or environments requiring AEC-Q101 certification

Both parts are electrically and mechanically interchangeable within circuits designed for 600 V, 10 A surface mount rectification.

Frequently Asked Questions (FAQ)

Q: Can the S10CJHM3/I replace the S10CJ-M3/I in existing designs?

A: Yes. The S10CJHM3/I maintains identical electrical specifications (600 V, 10 A, 1 V forward voltage, 5 µs recovery time) and uses the same DO-214AB package. The substitute part includes additional automotive qualification, making it suitable for the same applications and more demanding environments.

Q: What is the difference between these two part numbers?

A: The primary differences are qualification level and reverse leakage specification. The S10CJHM3/I carries AEC-Q101 automotive qualification and specifies reverse leakage at 600 V, while the S10CJ-M3/I is a general-purpose variant with reverse leakage specified at 400 V. Both parts meet identical voltage and current ratings.

Q: Are the packages identical?

A: Yes. Both parts use the DO-214AB (SMC) surface mount package. PCB footprints and reflow soldering profiles are identical.

Q: Does the S10CJ-M3/I meet RoHS and REACH requirements?

A: Yes. The S10CJ-M3/I is ROHS3 Compliant and REACH Unaffected. The S10CJHM3/I meets the same compliance standards.

Q: What is the reverse recovery time specification?

A: Both parts specify 5 µs reverse recovery time under standard recovery conditions (>500 ns, >200 mA). This parameter is critical for switching applications and power supply designs.

Q: Can these parts be used interchangeably in high-temperature applications?

A: Yes. Both parts operate across the same junction temperature range of -55°C to 150°C, supporting high-temperature industrial and automotive environments.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message