Equivalent & Substitute Parts for S07D-M-08

Part Overview

The S07D-M-08 is a general-purpose rectifier diode manufactured by Vishay General Semiconductor - Diodes Division, rated for 200 V DC reverse voltage and 700 mA average rectified current in a DO-219AB surface mount package. This part is classified as Active and carries automotive-grade qualification (AEC-Q101) with ROHS3 compliance. Substitute parts are identified when equivalent electrical performance and mechanical compatibility are required due to inventory constraints, design flexibility, or supply chain considerations.

Key Parameters

Parameter	Value	Unit
Voltage - DC Reverse (Vr) (Max)	200	V
Current - Average Rectified (Io)	700	mA
Voltage - Forward (Vf) (Max) @ If	1.1 V @ 1 A	V
Reverse Recovery Time (trr)	1.8	µs
Current - Reverse Leakage @ Vr	10	µA @ 200 V
Package / Case	DO-219AB	-
Mounting Type	Surface Mount	-
Operating Temperature - Junction	-55 to 150	°C
Grade	Automotive	-
Qualification	AEC-Q101	-

Substitute Part Grouping Explanation

Substitute parts for the S07D-M-08 are classified into two categories based on electrical and mechanical compatibility:

Parametric Equivalents maintain identical electrical specifications (200 V reverse voltage, 700 mA average rectified current, 1.1 V forward voltage at 1 A, 1.8 µs reverse recovery time) and use the same DO-219AB package. These parts are direct functional replacements with no circuit redesign required.

Manufacturer Recommended Substitutes provide equivalent reverse voltage (200 V) and forward voltage characteristics but differ in one or more of the following parameters: average rectified current rating, package type, reverse recovery time, or current leakage characteristics. These substitutes require verification of circuit current requirements and PCB layout compatibility due to package differences.

The critical parameters determining substitution eligibility are:

Voltage - DC Reverse (Vr) (Max): Must equal or exceed 200 V
Voltage - Forward (Vf) (Max) @ If: Must not exceed 1.1 V @ 1 A
Package / Case: DO-219AB preferred; SOD-123F acceptable with layout modification
Mounting Type: Surface Mount required
Operating Temperature Range: Must support -55°C to 150°C junction temperature
Grade and Qualification: Automotive grade and AEC-Q101 preferred for consistency

Parameter Comparison

Manufacturer Part Number	Manufacturer	Vr (Max) [V]	Io [mA]	Vf (Max) @ If [V]	trr [µs/ns]	Ir @ Vr [µA/nA]	Package	Packaging Type	Product Status	Qualification
S07D-M-08	Vishay General Semiconductor	200	700	1.1 @ 1 A	1.8 µs	10 µA @ 200 V	DO-219AB	Tape & Reel	Active	AEC-Q101
S07D-GS08	Vishay General Semiconductor	200	700	1.1 @ 1 A	1.8 µs	10 µA @ 200 V	DO-219AB	Tape & Reel	Active	AEC-Q101
S1FLD-GS08	Vishay General Semiconductor	200	700	1.1 @ 1 A	1.8 µs	10 µA @ 200 V	DO-219AB	Cut Tape & Digi-Reel	Active	Not specified
BAS21H,115	Nexperia USA Inc.	200	200	1.25 @ 200 mA	0.050 µs	0.1 µA @ 200 V	SOD-123F	Tape & Reel	Active	AEC-Q100
CRH01(TE85L,Q,M)	Toshiba Semiconductor and Storage	200	1000	0.98 @ 1 A	0.035 µs	10 µA @ 200 V	SOD-123F	Cut Tape & Digi-Reel	Active	Not specified
CRH01(TE85R,Q,M)	Toshiba Semiconductor and Storage	200	1000	0.98 @ 1 A	0.035 µs	10 µA @ 200 V	SOD-123F	Tape & Reel	Active	Not specified
SM4003PL-TP	Micro Commercial Co	200	1000	1.1 @ 1 A	>0.5 µs	5 µA @ 200 V	SOD-123F	Tape & Reel	Not For New Designs	Not specified
UFM13PL-TP	Micro Commercial Co	200	1000	1.0 @ 1 A	0.035 µs	10 µA @ 200 V	SOD-123F	Tape & Reel	Active	Not specified

Engineering Selection Recommendations

Direct Parametric Equivalents (Preferred for 1:1 Replacement)

S07D-GS08 and S1FLD-GS08 are parametric equivalents of S07D-M-08, maintaining identical electrical specifications and DO-219AB package compatibility. Both parts are Active status and ROHS3 compliant. S07D-GS08 is supplied in Tape & Reel packaging identical to the main part. S1FLD-GS08 is supplied in Cut Tape & Digi-Reel format, suitable for applications where alternative packaging is acceptable. No circuit modification is required for either equivalent.

Manufacturer Recommended Substitutes (Current Rating Consideration)

CRH01(TE85L,Q,M), CRH01(TE85R,Q,M), UFM13PL-TP, and SM4003PL-TP are manufacturer-recommended substitutes with 200 V reverse voltage rating and higher average rectified current (1000 mA). These parts use SOD-123F packages, which differ mechanically from the DO-219AB package. CRH01 variants and UFM13PL-TP feature faster reverse recovery times (35 ns and 35 ns respectively) compared to the main part (1.8 µs). UFM13PL-TP and CRH01 variants are Active status. SM4003PL-TP carries Not For New Designs status and is not recommended for new circuit designs.

Lower Current Substitute (Nexperia BAS21H,115)

BAS21H,115 is rated for 200 mA average rectified current, which is lower than the S07D-M-08 rating of 700 mA. This part is suitable only for applications where circuit current requirements do not exceed 200 mA. BAS21H,115 uses SOD-123F package and carries AEC-Q100 qualification (automotive grade). Forward voltage is 1.25 V @ 200 mA, which exceeds the main part specification of 1.1 V @ 1 A.

Compliance and Status Considerations

S07D-M-08, S07D-GS08, and S1FLD-GS08 are all Active status parts with ROHS3 compliance. CRH01(TE85L,Q,M), CRH01(TE85R,Q,M), and UFM13PL-TP are Active status with ROHS3 compliance. SM4003PL-TP carries Not For New Designs status and should not be selected for new circuit development. BAS21H,115 is Active status with ROHS3 compliance and AEC-Q100 qualification.

Frequently Asked Questions (FAQ)

Q: Can S07D-GS08 be used as a direct replacement for S07D-M-08?

A: Yes. S07D-GS08 is a parametric equivalent with identical electrical specifications (200 V reverse voltage, 700 mA average rectified current, 1.1 V forward voltage at 1 A, 1.8 µs reverse recovery time) and the same DO-219AB package. No circuit modification or PCB layout change is required.

Q: What is the difference between S07D-M-08 and S1FLD-GS08?

A: Both parts have identical electrical specifications and use the DO-219AB package. The difference is packaging format: S07D-M-08 is supplied in Tape & Reel, while S1FLD-GS08 is supplied in Cut Tape & Digi-Reel format. Electrical performance and PCB footprint are identical.

Q: Can UFM13PL-TP replace S07D-M-08 in my circuit?

A: UFM13PL-TP has a higher average rectified current rating (1000 mA versus 700 mA) and faster reverse recovery time (35 ns versus 1.8 µs). The reverse voltage rating (200 V) and forward voltage (1.0 V @ 1 A) are compatible. However, UFM13PL-TP uses SOD-123F package instead of DO-219AB, requiring PCB layout modification. Verify that your PCB design can accommodate the SOD-123F footprint before substitution.

Q: Why is SM4003PL-TP marked as Not For New Designs?

A: SM4003PL-TP carries Not For New Designs status, indicating that the manufacturer does not recommend this part for new circuit development. While it meets the 200 V reverse voltage and 1.1 V forward voltage specifications, new designs should select from Active status alternatives such as UFM13PL-TP or CRH01 variants.

Q: Can BAS21H,115 be used instead of S07D-M-08?

A: BAS21H,115 is rated for only 200 mA average rectified current, compared to S07D-M-08 at 700 mA. This substitute is suitable only if your circuit current requirement does not exceed 200 mA. The reverse voltage rating (200 V) is compatible, but forward voltage is higher at 1.25 V @ 200 mA. Verify circuit current requirements before selecting this substitute.

Q: What is the difference between CRH01(TE85L,Q,M) and CRH01(TE85R,Q,M)?

A: Both parts have identical electrical specifications (200 V reverse voltage, 1000 mA average rectified current, 980 mV forward voltage at 1 A, 35 ns reverse recovery time). The difference is packaging format: CRH01(TE85L,Q,M) is supplied in Cut Tape & Digi-Reel, while CRH01(TE85R,Q,M) is supplied in Tape & Reel. Both use SOD-123F package, requiring PCB layout modification from the DO-219AB footprint.

Q: Are all substitute parts ROHS3 compliant?

A: Yes. All listed substitute parts (S07D-GS08, S1FLD-GS08, BAS21H,115, CRH01(TE85L,Q,M), CRH01(TE85R,Q,M), SM4003PL-TP, and UFM13PL-TP) are ROHS3 compliant.

Q: What is the operating temperature range for these diodes?

A: S07D-M-08, S07D-GS08, and S1FLD-GS08 operate from -55°C to 150°C junction temperature. CRH01 variants operate from -40°C to 150°C. UFM13PL-TP operates from -65°C to 150°C. SM4003PL-TP operates from -65°C to 175°C. BAS21H,115 has a maximum junction temperature of 150°C. Verify that the selected substitute meets your application temperature requirements.

Q: Do all substitute parts have the same reverse recovery time as S07D-M-08?

A: No. S07D-M-08 has a reverse recovery time of 1.8 µs (standard recovery). CRH01(TE85L,Q,M), CRH01(TE85R,Q,M), and UFM13PL-TP have faster recovery times of 35 ns (fast recovery). SM4003PL-TP has standard recovery >500 ns. BAS21H,115 has 50 ns recovery time. Faster recovery times reduce switching losses in high-frequency applications but may not be necessary for all circuit designs.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message