Equivalent & Substitute Parts for RZ-1505S/P

Part Overview

The Recom Power RZ-1505S/P is an Isolated Module DC DC Converter, providing 5V output at 100mA with a 14.25V–15.75V input range, 1 kV isolation, and a surface-mount 10-SMD package. This part has an output power rating of 500 mW and operates in environments ranging from -40°C to 70°C. The RZ-1505S/P has been designated as obsolete, making it necessary to identify alternative models with equivalent electrical, mechanical, and compliance parameters to maintain continuity in designs and support active production.

Substiute Parts

RZ-1505S/P

Recom PowerIn Stock: 1081RZ-1505S/P Datasheet

Current PartRFQ

R0.5Z-1505/P

Recom PowerIn Stock: 851R0.5Z-1505/P Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution is determined strictly by the following key parameters: Type (Isolated Module), number of outputs (1), input voltage range (14.25V–15.75V), output voltage (5V), maximum output current (100mA), power rating (500 mW), voltage isolation (1 kV), mounting type (Surface Mount), package (10-SMD Module, 6 Leads), compliance statuses (RoHS, REACH), and application suitability (ITE, Commercial). Only substitutes meeting these parameters are considered equivalent.

Parameter Comparison

Engineering Selection Recommendations

Given the obsolete status of RZ-1505S/P and the active availability of R0.5Z-1505/P, substitution can be made without deviation from the required compliance and certification statuses, including RoHS3 and REACH. Both parts are designated MSL 1 (Unlimited) and maintain required ECCN and HTSUS classifications.

Frequently Asked Questions (FAQ)

Q1: What parameters must match when substituting RZ-1505S/P in a design?
A1: The substitute must have equivalent type, output configuration, voltage and current ratings, isolation, mounting type, package form, and compliance status as specified.

Q2: Are there dimensional or mechanical differences between RZ-1505S/P and R0.5Z-1505/P?
A2: The primary mechanical difference appears in the width and height; R0.5Z-1505/P is slightly wider (10.7 mm vs. 8.2 mm) and marginally lower in height (7.0 mm vs. 7.3 mm). Length remains identical.

Q3: Does the substitute R0.5Z-1505/P offer any additional performance range?
A3: Operating temperature for R0.5Z-1505/P extends up to 100°C compared to 70°C for RZ-1505S/P.

Q4: Is certification status (RoHS, REACH) affected by substitution?
A4: Both RZ-1505S/P and R0.5Z-1505/P are ROHS3 Compliant and REACH Unaffected.

Q5: Are package and mounting compatibility maintained with the substitute?
A5: Both parts use the surface-mount 10-SMD Module, 6 Leads package, supporting drop-in replacement, subject to dimension confirmation.