RY2V-UAC24V Equivalent & Substitute Parts

Part Overview

The RY2V-UAC24V is a general purpose relay manufactured by IDEC, featuring a DPDT (2 Form C) contact configuration with a 24VAC coil. This socketable relay is designed for PCB mounting applications requiring 3A contact rating at switching voltages up to 240VAC or 30VDC. The part is currently active in production with 804 units in stock. Substitute parts are identified when they maintain identical electrical and mechanical specifications, ensuring direct functional equivalence in circuit applications.

Substiute Parts

RY2V-UAC24V

IDECIn Stock: 897RY2V-UAC24V Datasheet

Current PartRFQ

RY2S-UAC24V

IDECIn Stock: 1068RY2S-UAC24V Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

The RY2S-UAC24V qualifies as a parametric equivalent to the RY2V-UAC24V based on the following critical parameters that determine substitution eligibility:

• Coil voltage: 24VAC (identical)
• Contact form: DPDT (2 Form C) (identical)
• Contact rating: 3 A (identical)
• Switching voltage: 240VAC, 30VDC - Max (identical)
• Coil current: 37 mA (identical)
• Coil type: Non Latching (identical)
• Mounting type: Socketable (identical)
• Termination style: Plug In (identical)
• Operating temperature range: -25°C ~ 55°C (identical)
• Contact material: Silver (Ag), Gold (Au) (identical)
• Coil resistance: 300 Ohms (identical)
• Must operate voltage: 19.2 VAC (identical)
• Must release voltage: 7.2 VAC (identical)
• Operate time: 20 ms (identical)
• Release time: 20 ms (identical)

Both parts belong to the IDEC RY series and maintain complete electrical and mechanical compatibility.

Parameter Comparison

Engineering Selection Recommendations

Both the RY2V-UAC24V and RY2S-UAC24V are active products from IDEC. The RY2S-UAC24V carries ROHS3 compliance certification, which may be a requirement for applications subject to RoHS regulations. Selection between these parts should be based on compliance requirements specific to the end application. Both parts are electrically and mechanically equivalent for standard circuit applications.

Frequently Asked Questions (FAQ)

Q: Can the RY2S-UAC24V directly replace the RY2V-UAC24V in existing designs?

A: Yes. Both relays share identical electrical specifications including coil voltage, contact configuration, current rating, switching voltage, timing characteristics, and operating temperature range. The socketable mounting and plug-in termination style are identical, enabling direct substitution in PCB applications.

Q: What is the difference between RY2V-UAC24V and RY2S-UAC24V?

A: The parts are electrically and mechanically equivalent. The RY2S-UAC24V includes ROHS3 compliance certification, while the RY2V-UAC24V specification does not indicate this compliance status.

Q: Are there any compatibility concerns with socket mounting?

A: No. Both relays feature socketable mounting with plug-in termination, ensuring compatibility with standard relay sockets designed for the RY series.

Q: What coil voltage is required for operation?

A: Both relays require 24VAC coil voltage. The must-operate voltage is 19.2 VAC and the must-release voltage is 7.2 VAC.

Q: What is the maximum switching capacity?

A: Both relays are rated for 3A contact current at switching voltages up to 240VAC or 30VDC maximum.