RVC2512JT470K Equivalent & Substitute Parts

Part Overview

The RVC2512JT470K is a 470 kOhms ±5% 1W chip resistor in 2512 (6432 Metric) package manufactured by Stackpole Electronics Inc. This thick film resistor is designed for general-purpose applications requiring moderate power dissipation and standard tolerance specifications. The part is currently active in production with ROHS3 compliance and unlimited moisture sensitivity rating. Equivalent and substitute parts are identified to support procurement flexibility, inventory management, and application-specific requirements where alternative electrical or mechanical characteristics may be beneficial.

Substiute Parts

RVC2512JT470K

Stackpole Electronics IncIn Stock: 1151RVC2512JT470K Datasheet

Current PartRFQ

3521470KFT

TE Connectivity Passive ProductIn Stock: 11193521470KFT Datasheet

DirectRFQ

RC2512JK-07470KL

YAGEOIn Stock: 9600RC2512JK-07470KL Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the RVC2512JT470K is determined by the following critical parameters:

Primary Substitution Criteria:

• Resistance value: 470 kOhms (exact match required)
• Package / Case: 2512 (6432 Metric) (exact match required)
• Composition: Thick Film (exact match required)
• Operating Temperature Range: -55°C ~ 155°C (minimum requirement)
• RoHS Status: ROHS3 Compliant (minimum requirement)

Secondary Substitution Parameters (allowable variation):

• Tolerance: ±5% or tighter (±1% acceptable as upgrade)
• Power Rating: 1W or higher (2W acceptable as upgrade)
• Temperature Coefficient: ±100ppm/°C (standard specification)
• Moisture Sensitivity Level: 1 (Unlimited) (standard specification)

Identified substitutes meet all primary criteria and maintain or exceed secondary specifications. Tolerance improvements and power rating increases represent functional enhancements without compromising application compatibility.

Parameter Comparison

Engineering Selection Recommendations

RC2512JK-07470KL (YAGEO): This part is recommended as a primary equivalent substitute. It maintains identical resistance, tolerance, and power rating specifications as the RVC2512JT470K. The part features moisture-resistant construction and is actively produced with full ROHS3 compliance. Dimensional variations are minimal and within standard PCB assembly tolerances. This substitute is suitable for direct replacement in applications where the original specification is maintained.

3521470KFT (TE Connectivity): This part is recommended as an enhanced substitute where improved tolerance and higher power dissipation capability are beneficial. The ±1% tolerance provides tighter resistance accuracy compared to the ±5% specification of the main part. The 2W power rating offers increased thermal margin in applications subject to elevated power dissipation. This part carries AEC-Q200 automotive qualification, indicating suitability for automotive and high-reliability applications. Dimensional compatibility is confirmed within standard assembly tolerances. This substitute is suitable for applications requiring enhanced performance specifications.

All identified substitutes maintain active production status, ROHS3 compliance, and unlimited moisture sensitivity rating, ensuring long-term availability and regulatory consistency.

Frequently Asked Questions (FAQ)

Q: Can RC2512JK-07470KL be used as a direct replacement for RVC2512JT470K?

A: Yes. Both parts share identical resistance (470 kOhms), tolerance (±5%), power rating (1W), and package specification (2512 / 6432 Metric). Dimensional differences are within standard PCB assembly tolerances. The parts are electrically and mechanically interchangeable.

Q: What is the advantage of using 3521470KFT over the original RVC2512JT470K?

A: The 3521470KFT provides two functional enhancements: tighter tolerance (±1% versus ±5%) for improved resistance accuracy, and higher power rating (2W versus 1W) for increased thermal headroom. The part also carries AEC-Q200 automotive qualification. These upgrades do not compromise compatibility; the part maintains the same package and operating temperature range.

Q: Are there any dimensional incompatibilities between these substitutes?

A: All three parts use the 2512 (6432 Metric) package with identical height specifications (0.026" / 0.65mm maximum). Length and width dimensions vary slightly (within 0.002" / 0.05mm range), which is within standard PCB assembly tolerances and does not affect footprint compatibility or reflow soldering performance.

Q: Do all substitutes meet the same compliance requirements?

A: Yes. All three parts are ROHS3 compliant, carry unlimited moisture sensitivity rating (MSL 1), and are classified as REACH Unaffected. All parts are actively produced and available in Tape & Reel packaging.

Q: Can 3521470KFT be used in applications originally designed for RVC2512JT470K?

A: Yes. The 3521470KFT meets or exceeds all electrical and mechanical requirements of the RVC2512JT470K. The enhanced specifications (tighter tolerance and higher power rating) do not introduce compatibility issues. The part is suitable for direct substitution in all applications where the original part was specified.

Q: What is the temperature coefficient specification for all substitutes?

A: All three parts share an identical temperature coefficient of ±100ppm/°C and operate across the same temperature range (-55°C ~ 155°C). This ensures consistent thermal performance across all substitutes.