RVC2512JT200R Equivalent & Substitute Parts

Part Overview

The RVC2512JT200R is a 200 Ohms ±5% 1W chip resistor in 2512 (6432 Metric) package manufactured by Stackpole Electronics Inc. This thick film resistor is currently in active production status with 779 pieces available in stock. Alternative equivalent parts are necessary to ensure supply chain flexibility, accommodate design revisions, or meet specific application requirements such as automotive qualification.

Substiute Parts

RVC2512JT200R

Stackpole Electronics IncIn Stock: 847RVC2512JT200R Datasheet

Current PartRFQ

RMCF2512JT200R

Stackpole Electronics IncIn Stock: 39458RMCF2512JT200R Datasheet

UpgradeRFQ

CR2512-JW-201ELF

Bourns Inc.In Stock: 12248CR2512-JW-201ELF Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the RVC2512JT200R is determined by strict equivalence across the following critical parameters:

• Resistance value: 200 Ohms
• Tolerance: ±5%
• Power rating: 1W
• Package type: 2512 (6432 Metric)
• Composition: Thick Film
• Temperature coefficient: ±200ppm/°C
• Operating temperature range: -55°C ~ 155°C
• RoHS compliance: ROHS3 Compliant
• Moisture sensitivity: MSL 1

All substitute parts listed meet these core electrical and mechanical specifications. Physical dimensions may vary within acceptable tolerances for the 2512 package standard.

Parameter Comparison

Engineering Selection Recommendations

All three parts are active production components with ROHS3 compliance and identical core electrical specifications. Selection between these equivalents should be based on the following factors:

RMCF2512JT200R includes AEC-Q200 automotive qualification, making it suitable for applications requiring automotive-grade reliability standards. This part is available in higher inventory (39,423 pieces).

CR2512-JW-201ELF is manufactured by Bourns Inc. and provides an alternative source from a different manufacturer, supporting supply chain diversification. Inventory availability is 12,200 pieces.

RVC2512JT200R remains the primary specification with 779 pieces in stock and is suitable for general industrial applications where automotive qualification is not required.

Frequently Asked Questions (FAQ)

Q: Can RMCF2512JT200R be used as a direct replacement for RVC2512JT200R?

A: Yes. Both parts share identical electrical specifications (200 Ohms ±5%, 1W, ±200ppm/°C, -55°C ~ 155°C operating range) and the same 2512 package. The RMCF series includes additional AEC-Q200 automotive qualification, which does not prevent use in non-automotive applications.

Q: What is the difference between RVC and RMCF series from Stackpole?

A: The RMCF series includes AEC-Q200 automotive qualification. Both series use identical thick film composition and meet the same electrical and environmental specifications for this 200 Ohm 1W resistor.

Q: Are physical dimensions identical across all three parts?

A: Physical dimensions are within the 2512 (6432 Metric) package standard. Minor variations exist: RVC2512JT200R measures 0.250" L x 0.126" W (6.35mm x 3.20mm), while RMCF2512JT200R and CR2512-JW-201ELF measure 0.248" L x 0.126" W (6.30mm x 3.20mm) and 0.248" L x 0.122" W (6.30mm x 3.10mm) respectively. These variations are within standard package tolerances and do not affect PCB footprint compatibility.

Q: Do all parts meet the same compliance standards?

A: Yes. All three parts are ROHS3 compliant, REACH unaffected, and classified as MSL 1 (Unlimited moisture sensitivity level). All carry ECCN EAR99 classification.

Q: Which part should be selected for supply chain continuity?

A: RMCF2512JT200R offers the highest inventory availability (39,423 pieces) and maintains the same manufacturer (Stackpole Electronics Inc). CR2512-JW-201ELF provides manufacturer diversification through Bourns Inc., supporting long-term supply resilience.