RVC2512JT100R Equivalent & Substitute Parts

Part Overview

The RVC2512JT100R is a 100 Ohms ±5% 1W thick film chip resistor in 2512 (6432 Metric) package manufactured by Stackpole Electronics Inc. This component is actively produced and widely used in general-purpose electronic applications requiring standard tolerance and power dissipation characteristics. Equivalent and substitute parts are identified when design requirements permit tolerance upgrades, increased power ratings, or alternative manufacturer sourcing while maintaining the same resistance value, package footprint, and operating temperature range.

Substiute Parts

RVC2512JT100R

Stackpole Electronics IncIn Stock: 868RVC2512JT100R Datasheet

Current PartRFQ

RHC2512FT100R

Stackpole Electronics IncIn Stock: 79780RHC2512FT100R Datasheet

UpgradeRFQ

3521100RFT

TE Connectivity Passive ProductIn Stock: 154483521100RFT Datasheet

DirectRFQ

CR2512-JW-101ELF

Bourns Inc.In Stock: 26565CR2512-JW-101ELF Datasheet

DirectRFQ

CRCW2512100RJNEGHP

Vishay DaleIn Stock: 8391CRCW2512100RJNEGHP Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the RVC2512JT100R are qualified based on the following criteria:

Mandatory Compatibility Parameters:

• Resistance value: 100 Ohms (exact match required)
• Package / Case: 2512 (6432 Metric) (exact match required)
• Operating temperature range: -55°C ~ 155°C (minimum requirement)
• Composition: Thick Film
• RoHS Status: ROHS3 Compliant
• Moisture Sensitivity Level: 1 (Unlimited)

Allowable Variations:

• Tolerance: May be equal or tighter (±5% or better)
• Power rating: May be equal or higher (1W or greater)
• Temperature coefficient: May be equal or lower in absolute value
• Manufacturer: Different manufacturers permitted if all parameters align

Substitutes are grouped into two categories: upgrade substitutes (improved tolerance and/or power rating) and direct equivalents (matching specifications from alternative manufacturers).

Parameter Comparison

Engineering Selection Recommendations

RHC2512FT100R (Stackpole Electronics Inc) This upgrade substitute offers improved tolerance (±1% vs ±5%) and doubled power rating (2W vs 1W) while maintaining the same manufacturer and package. Temperature coefficient is improved to ±100ppm/°C. Suitable for applications requiring tighter resistance tolerance and higher thermal margin. ROHS3 compliant with moisture-resistant features.

3521100RFT (TE Connectivity Passive Product) This substitute provides ±1% tolerance and 2W power rating with automotive AEC-Q200 qualification. Recommended for automotive and high-reliability applications. Identical operating temperature range and package footprint. ROHS3 compliant.

CR2512-JW-101ELF (Bourns Inc.) Direct equivalent with matching ±5% tolerance and 1W power rating. Provides alternative manufacturer sourcing from Bourns. Suitable for applications where Bourns components are preferred or required. ROHS3 compliant.

CRCW2512100RJNEGHP (Vishay Dale) This substitute offers increased power rating (1.5W vs 1W) with automotive AEC-Q200 qualification and pulse withstanding capability. Maintains ±5% tolerance. Recommended for automotive applications and circuits subject to transient pulse conditions. ROHS3 compliant.

Frequently Asked Questions (FAQ)

Q: Can RHC2512FT100R replace RVC2512JT100R in all applications? A: Yes, RHC2512FT100R is a direct upgrade substitute. It maintains the same 100 Ohm resistance, 2512 package, and operating temperature range. The improved ±1% tolerance and 2W power rating provide enhanced performance margins. No circuit redesign is required.

Q: What is the difference between the tolerance specifications? A: RVC2512JT100R has ±5% tolerance, meaning the actual resistance can vary between 95 and 105 Ohms. RHC2512FT100R and 3521100RFT have ±1% tolerance, meaning actual resistance varies between 99 and 101 Ohms. Tighter tolerance is beneficial in precision circuits but not required for general-purpose applications.

Q: Are all substitute parts in the same 2512 package? A: Yes, all listed substitutes use the 2512 (6432 Metric) package with identical footprint dimensions. They are pin-compatible and require no PCB layout modifications.

Q: Which substitute should I use for automotive applications? A: Both 3521100RFT and CRCW2512100RJNEGHP carry AEC-Q200 automotive qualification. 3521100RFT offers 2W power rating, while CRCW2512100RJNEGHP adds pulse withstanding capability at 1.5W. Selection depends on specific power and transient requirements.

Q: What does ROHS3 compliance mean? A: ROHS3 compliance indicates the component meets Restriction of Hazardous Substances Directive requirements, restricting lead, cadmium, mercury, and other hazardous materials. All listed parts are ROHS3 compliant.

Q: Can I use a higher power-rated resistor as a substitute? A: Yes, using a higher power-rated resistor (2W instead of 1W) is acceptable and provides additional thermal margin. The component will operate cooler in the same circuit, improving reliability. No circuit modifications are required.

Q: What is the significance of Moisture Sensitivity Level 1? A: MSL 1 (Unlimited) indicates the component has no moisture sensitivity restrictions. It can be stored indefinitely without special humidity controls and does not require baking before soldering. All listed parts have MSL 1 rating.