RVC2010KT47R0 Equivalent & Substitute Parts

Part Overview

The RVC2010KT47R0 is a 47 Ohm ±10% 0.5W thick film chip resistor in 2010 (5025 Metric) package manufactured by Stackpole Electronics Inc. This component is actively produced and widely used in general-purpose applications requiring standard tolerance resistive elements. Substitute parts are identified for applications requiring improved tolerance specifications, higher power ratings, automotive qualification, or alternative manufacturer sourcing while maintaining the same resistance value and package footprint.

Key Parameters

Parameter	Value
Resistance	47 Ohms
Tolerance	±10%
Power Rating	0.5W (1/2W)
Package	2010 (5025 Metric)
Composition	Thick Film
Operating Temperature Range	-55°C to 155°C
Temperature Coefficient	±200ppm/°C
RoHS Status	ROHS3 Compliant
Moisture Sensitivity Level	1 (Unlimited)

Substitute Part Grouping Explanation

Substitution of the RVC2010KT47R0 is determined by the following allowable parameter variations:

Tolerance Upgrade: Substitute parts with ±1% or ±5% tolerance provide improved accuracy compared to the ±10% specification of the main part, suitable for applications requiring tighter resistance control.

Power Rating Upgrade: Substitute parts rated at 0.75W (3/4W) or 1W provide higher power dissipation capability while maintaining the same 2010 package footprint and thermal characteristics within the operating temperature range.

Automotive Qualification: Substitute parts with AEC-Q200 certification meet automotive industry reliability standards and are suitable for automotive and high-reliability applications.

Manufacturer Alternatives: Panasonic ERJ-12ZYJ470U provides equivalent electrical and mechanical specifications from an alternative qualified manufacturer.

Package Compatibility: All substitute parts maintain identical 2010 (5025 Metric) package dimensions (0.197" L × 0.098" W, 5.00mm × 2.50mm) and two-termination configuration, ensuring direct footprint compatibility.

Parameter Comparison

Part Number	Manufacturer	Resistance	Tolerance	Power Rating	Temp Coeff	AEC-Q200	Product Status
RVC2010KT47R0	Stackpole Electronics Inc	47 Ohms	±10%	0.5W	±200ppm/°C	No	Active
RMCF2010FT47R0	Stackpole Electronics Inc	47 Ohms	±1%	0.75W	±100ppm/°C	Yes	Active
RMCF2010JT47R0	Stackpole Electronics Inc	47 Ohms	±5%	0.75W	±200ppm/°C	Yes	Active
RMCP2010FT47R0	Stackpole Electronics Inc	47 Ohms	±1%	1W	±100ppm/°C	Yes	Active
ERJ-12ZYJ470U	Panasonic Electronic Components	47 Ohms	±5%	0.75W	±200ppm/°C	Yes	Not For New Designs

Engineering Selection Recommendations

For Active Production Applications: RMCF2010FT47R0, RMCF2010JT47R0, and RMCP2010FT47R0 are all actively produced by Stackpole Electronics Inc and suitable for new designs. These parts maintain ROHS3 compliance and MSL 1 rating identical to the main part.

For Automotive and High-Reliability Applications: RMCF2010FT47R0, RMCF2010JT47R0, and RMCP2010FT47R0 carry AEC-Q200 certification, meeting automotive industry qualification requirements. RMCP2010FT47R0 provides the highest power rating at 1W with ±1% tolerance and ±100ppm/°C temperature coefficient.

For Tolerance-Critical Applications: RMCF2010FT47R0 and RMCP2010FT47R0 offer ±1% tolerance with improved temperature coefficient (±100ppm/°C) compared to the ±10% tolerance and ±200ppm/°C of the main part.

For Legacy System Maintenance: ERJ-12ZYJ470U from Panasonic provides equivalent specifications but carries "Not For New Designs" status and should be used only for replacement in existing systems where original part sourcing is unavailable.

Frequently Asked Questions (FAQ)

Q: Can RMCF2010FT47R0 directly replace RVC2010KT47R0 in existing designs?

A: Yes. Both parts share identical 2010 package dimensions, two-termination configuration, operating temperature range (-55°C to 155°C), and ROHS3 compliance. RMCF2010FT47R0 provides improved tolerance (±1% vs ±10%) and higher power rating (0.75W vs 0.5W) with no footprint changes required.

Q: What is the difference between RMCF2010JT47R0 and RMCF2010FT47R0?

A: Both are Stackpole RMCF series 2010 package resistors with AEC-Q200 certification and 0.75W power rating. RMCF2010FT47R0 specifies ±1% tolerance and ±100ppm/°C temperature coefficient. RMCF2010JT47R0 specifies ±5% tolerance and ±200ppm/°C temperature coefficient. Selection depends on tolerance and temperature stability requirements.

Q: Why is RMCP2010FT47R0 rated at 1W instead of 0.75W?

A: RMCP2010FT47R0 belongs to the RMCP series, which is designed for higher power dissipation applications. It maintains the same 2010 package footprint with maximum seated height of 0.028" (0.70mm), providing 1W power rating with ±1% tolerance and ±100ppm/°C temperature coefficient for applications requiring increased thermal capability.

Q: Can ERJ-12ZYJ470U be used in new product designs?

A: No. ERJ-12ZYJ470U carries "Not For New Designs" product status. It is suitable only for replacement and maintenance of existing systems. For new designs, use RMCF2010FT47R0, RMCF2010JT47R0, or RMCP2010FT47R0 from Stackpole Electronics Inc.

Q: Are all substitute parts ROHS3 compliant?

A: Yes. All listed substitute parts (RMCF2010FT47R0, RMCF2010JT47R0, RMCP2010FT47R0, and ERJ-12ZYJ470U) are ROHS3 compliant with MSL 1 (Unlimited) moisture sensitivity level, matching the environmental compliance of the main part RVC2010KT47R0.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message