RVC2010JT47R0 Equivalent & Substitute Parts

Part Overview

The RVC2010JT47R0 is a 47 Ohm ±5% 0.5W thick film chip resistor in 2010 (5025 Metric) package manufactured by Stackpole Electronics Inc. This component is actively produced and widely used in general-purpose circuit applications requiring precision resistive elements. Substitute parts are identified when equivalent electrical specifications and mechanical compatibility are maintained across the same package footprint, enabling seamless integration in PCB designs without layout modifications.

Substiute Parts

RVC2010JT47R0

Stackpole Electronics IncIn Stock: 1115RVC2010JT47R0 Datasheet

Current PartRFQ

CRGS2010J47R

TE Connectivity AMP ConnectorsIn Stock: 4864CRGS2010J47R Datasheet

UpgradeRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the RVC2010JT47R0 is determined by strict adherence to the following parameters:

• Resistance value: 47 Ohms (exact match required)
• Tolerance: ±5% (exact match required)
• Package / Case: 2010 (5025 Metric) (exact match required)
• Physical dimensions: 0.197" L x 0.098" W, Height ≤ 0.026" (exact match required)
• Composition: Thick Film (exact match required)
• Temperature Coefficient: ±100ppm/°C (exact match required)
• Operating Temperature Range: -55°C ~ 155°C (exact match required)
• Number of Terminations: 2 (exact match required)

The identified substitute part CRGS2010J47R meets all mandatory electrical and mechanical parameters. Power rating may exceed the original specification (0.75W vs. 0.5W), which is permissible as higher power ratings provide additional thermal margin without affecting circuit performance at the specified operating conditions.

Parameter Comparison

Engineering Selection Recommendations

Both the RVC2010JT47R0 and CRGS2010J47R are active products with current manufacturing status. The RVC2010JT47R0 maintains ROHS3 compliance, while the CRGS2010J47R maintains RoHS compliance. Both components satisfy environmental and regulatory requirements for their respective compliance standards.

The CRGS2010J47R offers increased power dissipation capability (0.75W vs. 0.5W) while maintaining identical electrical characteristics and mechanical footprint. This substitution is valid for applications where the original 0.5W specification is met or where additional thermal margin is beneficial. Selection between these parts should be based on availability, lead time, and cost considerations, as both satisfy the specified electrical and mechanical requirements.

Frequently Asked Questions (FAQ)

Q: Can CRGS2010J47R be used as a direct replacement for RVC2010JT47R0?

A: Yes. Both components share identical resistance (47 Ohms), tolerance (±5%), package (2010/5025 Metric), physical dimensions, temperature coefficient (±100ppm/°C), and operating temperature range (-55°C ~ 155°C). The higher power rating of CRGS2010J47R (0.75W vs. 0.5W) does not prevent substitution and provides additional thermal capability.

Q: Are there any package or footprint differences between these parts?

A: No. Both parts use the 2010 (5025 Metric) package with identical physical dimensions of 0.197" L x 0.098" W and maximum seated height of 0.026" (0.65mm). PCB layouts and reflow profiles require no modification.

Q: What is the significance of the higher power rating on the substitute part?

A: The CRGS2010J47R is rated for 0.75W compared to the RVC2010JT47R0's 0.5W rating. This represents increased thermal dissipation capability and does not affect electrical performance when operating within the original design specifications. The substitute part provides additional margin for thermal stress.

Q: Do both parts meet the same compliance standards?

A: Both parts are RoHS compliant. The RVC2010JT47R0 specifically meets ROHS3 requirements, while the CRGS2010J47R meets RoHS requirements. Both are classified as EAR99 for export control purposes.

Q: Are there any moisture sensitivity considerations?

A: The RVC2010JT47R0 has Moisture Sensitivity Level 1 (Unlimited), indicating no moisture sensitivity restrictions. The CRGS2010J47R is listed as Not Applicable for MSL, indicating equivalent or superior moisture performance.