RVC2010JT150R Equivalent & Substitute Parts

Part Overview

The RVC2010JT150R is a 150 Ohm ±5% 0.5W thick film chip resistor in 2010 (5025 Metric) package manufactured by Stackpole Electronics Inc. This component is currently active in production and widely used in general-purpose electronic applications requiring standard tolerance resistive elements. Equivalent and substitute parts are identified to provide design flexibility, support supply chain continuity, and accommodate specific application requirements such as improved tolerance specifications or automotive-grade certifications.

Substiute Parts

RVC2010JT150R

Stackpole Electronics IncIn Stock: 853RVC2010JT150R Datasheet

Current PartRFQ

RMCF2010FT150R

Stackpole Electronics IncIn Stock: 20761RMCF2010FT150R Datasheet

UpgradeRFQ

CR2010-FX-1500ELF

Bourns Inc.In Stock: 5995CR2010-FX-1500ELF Datasheet

UpgradeRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the RVC2010JT150R are qualified based on the following criteria:

Mandatory Matching Parameters:

• Resistance value: 150 Ohms
• Package / Case: 2010 (5025 Metric)
• Composition: Thick Film
• Temperature Coefficient: ±100ppm/°C
• Operating Temperature Range: -55°C ~ 155°C
• RoHS Status: ROHS3 Compliant
• Moisture Sensitivity Level: 1 (Unlimited)

Allowable Variations:

• Tolerance: May be equal or tighter (±5% or better)
• Power Rating: May be equal or higher (0.5W or greater)
• Manufacturer: Different manufacturers acceptable if all parameters match

Two substitute parts meet these criteria and are listed below.

Parameter Comparison

Engineering Selection Recommendations

RMCF2010FT150R (Stackpole Electronics Inc): This substitute offers improved tolerance (±1% versus ±5%) and higher power rating (0.75W versus 0.5W). The RMCF series includes AEC-Q200 automotive qualification, making this part suitable for applications requiring automotive-grade reliability. Height difference is minimal (0.028" versus 0.026"), presenting no practical PCB layout constraints. Select this part when tighter tolerance specifications or automotive compliance is required.

CR2010-FX-1500ELF (Bourns Inc.): This substitute provides improved tolerance (±1% versus ±5%) while maintaining the original 0.5W power rating. The CR2010 series maintains identical electrical performance and thermal characteristics. Height is 0.028" (0.70mm), consistent with RMCF2010FT150R. Select this part when tolerance improvement is needed without requiring automotive certification or increased power rating.

Frequently Asked Questions (FAQ)

Q: Can RMCF2010FT150R replace RVC2010JT150R in any application? A: Yes. RMCF2010FT150R meets all mandatory parameters and exceeds specifications in tolerance (±1% versus ±5%) and power rating (0.75W versus 0.5W). The marginal height increase (0.002") does not affect standard PCB designs.

Q: What is the difference between the two substitute parts? A: RMCF2010FT150R offers higher power rating (0.75W) and AEC-Q200 automotive certification. CR2010-FX-1500ELF maintains the original 0.5W rating. Both provide ±1% tolerance. Choose based on power budget and automotive requirements.

Q: Are all three parts mechanically interchangeable? A: Yes. All three parts use the 2010 (5025 Metric) package with identical footprints. Height variations (0.026" to 0.028") are within standard PCB assembly tolerances and do not affect placement or soldering.

Q: Do substitute parts maintain the same temperature performance? A: Yes. All three parts share identical temperature coefficient (±100ppm/°C) and operating range (-55°C ~ 155°C).

Q: Are all parts RoHS3 compliant? A: Yes. RVC2010JT150R, RMCF2010FT150R, and CR2010-FX-1500ELF are all ROHS3 compliant with MSL 1 (Unlimited).