RVC2010JT100R Equivalent & Substitute Parts

Part Overview

The RVC2010JT100R is a 100 Ohm ±5% thick film chip resistor manufactured by Stackpole Electronics Inc., rated for 0.5W (1/2W) power dissipation in a 2010 (5025 Metric) surface mount package. This component is actively produced and RoHS3 compliant, suitable for general-purpose resistive applications requiring standard tolerance specifications. Substitute parts are identified when equivalent electrical performance, mechanical compatibility, and environmental ratings are maintained across alternative manufacturers while potentially offering improved tolerance or power ratings.

Substiute Parts

RVC2010JT100R

Stackpole Electronics IncIn Stock: 812RVC2010JT100R Datasheet

Current PartRFQ

CR2010-FX-1000ELF

Bourns Inc.In Stock: 3002CR2010-FX-1000ELF Datasheet

UpgradeRFQ

RC5025F101CS

Samsung Electro-MechanicsIn Stock: 1571RC5025F101CS Datasheet

UpgradeRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the RVC2010JT100R are qualified based on the following criteria:

• Resistance Value: Must be 100 Ohms
• Package Compatibility: Must use 2010 (5025 Metric) case size to ensure PCB footprint compatibility
• Electrical Performance: Operating temperature range of -55°C ~ 155°C and temperature coefficient of ±100ppm/°C must be maintained
• Environmental Compliance: RoHS3 compliance and MSL 1 rating required
• Power Rating: Equal to or greater than 0.5W (1/2W) acceptable
• Tolerance: Equal to or tighter than ±5% acceptable

Two substitute parts meet these criteria: CR2010-FX-1000ELF (Bourns Inc.) and RC5025F101CS (Samsung Electro-Mechanics). Both maintain the 2010 package footprint, operating temperature range, and compliance requirements while offering improved tolerance specifications.

Parameter Comparison

Engineering Selection Recommendations

Both substitute parts maintain full electrical and mechanical compatibility with the RVC2010JT100R while meeting all compliance requirements. CR2010-FX-1000ELF (Bourns) provides equivalent 0.5W power rating with improved ±1% tolerance. RC5025F101CS (Samsung) offers increased power dissipation capability at 0.667W with ±1% tolerance and moisture-resistant composition, suitable for applications requiring enhanced environmental protection. All three parts are actively produced with RoHS3 compliance and MSL 1 rating, ensuring long-term availability and regulatory conformance.

Frequently Asked Questions (FAQ)

Q: Can CR2010-FX-1000ELF replace RVC2010JT100R directly on the PCB?

A: Yes. Both components use the 2010 (5025 Metric) package with identical footprint dimensions (0.197" L x 0.098" W). The CR2010-FX-1000ELF height of 0.028" (0.70mm) versus 0.026" (0.65mm) for the RVC2010JT100R is within standard PCB assembly tolerances and does not affect placement or soldering.

Q: What is the advantage of RC5025F101CS over the original part?

A: RC5025F101CS provides 0.667W power rating compared to 0.5W in the RVC2010JT100R, offering 33% additional power dissipation margin. It also includes moisture-resistant composition and maintains ±1% tolerance. The 2010 package footprint remains identical for direct substitution.

Q: Are tolerance differences significant for circuit operation?

A: Tolerance differences between ±5% (RVC2010JT100R) and ±1% (substitute parts) affect resistor value accuracy. Applications requiring tighter resistance control benefit from ±1% tolerance parts. For general-purpose circuits, both tolerance levels are functionally equivalent.

Q: Do substitute parts require different soldering or assembly procedures?

A: No. All three parts use identical 2010 (5025 Metric) package specifications and thick film composition. Standard SMD assembly and reflow soldering procedures apply without modification.

Q: Are there packaging format differences between these parts?

A: RVC2010JT100R is supplied in Tape & Reel (TR) format. CR2010-FX-1000ELF is also Tape & Reel (TR). RC5025F101CS is available in Cut Tape (CT) & Digi-Reel® format. Packaging format does not affect component electrical or mechanical performance, only handling and storage logistics.