RVC2010FT9M09 Equivalent & Substitute Parts

Part Overview

The RVC2010FT9M09 is a 9.09 MOhms ±1% 0.5W thick film chip resistor in 2010 (5025 Metric) package manufactured by Stackpole Electronics Inc. This component is currently in active production status. Substitute parts may be required due to inventory constraints, application-specific performance requirements, or design upgrades necessitating enhanced specifications such as higher power ratings or automotive-grade reliability certifications.

Substiute Parts

RVC2010FT9M09

Stackpole Electronics IncIn Stock: 797RVC2010FT9M09 Datasheet

Current PartRFQ

RMCF2010FT9M09

Stackpole Electronics IncIn Stock: 3898RMCF2010FT9M09 Datasheet

UpgradeRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the RVC2010FT9M09 is determined by the following critical parameters:

• Resistance Value: Must be 9.09 MOhms
• Tolerance: Must be ±1%
• Package / Case: Must be 2010 (5025 Metric)
• Composition: Must be Thick Film
• Operating Temperature Range: Must support -55°C ~ 155°C minimum
• RoHS Compliance: Must maintain ROHS3 Compliant status

The RMCF2010FT9M09 qualifies as a direct substitute because it maintains identical resistance, tolerance, package dimensions, and composition while offering enhanced specifications in power rating and temperature coefficient performance.

Parameter Comparison

Engineering Selection Recommendations

The RMCF2010FT9M09 is a qualified substitute for the RVC2010FT9M09 based on the following engineering criteria:

Electrical Compatibility: Both parts maintain identical resistance value (9.09 MOhms) and tolerance (±1%), ensuring functional equivalence in circuit applications.

Mechanical Compatibility: Both components use the 2010 (5025 Metric) package with matching footprint dimensions (0.197" L x 0.098" W). The maximum seated height difference (0.026" vs 0.028") is negligible for standard PCB assembly processes.

Regulatory Compliance: Both parts are ROHS3 Compliant, REACH Unaffected, and maintain MSL 1 (Unlimited) moisture sensitivity rating, ensuring equivalent environmental and regulatory qualification.

Enhanced Specifications: The RMCF2010FT9M09 offers superior performance characteristics including 50% higher power rating (0.75W vs 0.5W) and improved temperature coefficient (±100ppm/°C vs ±200ppm/°C), making it suitable for applications requiring enhanced thermal stability or higher dissipation margins.

Automotive Qualification: The RMCF2010FT9M09 carries AEC-Q200 automotive qualification, providing additional reliability assurance for automotive and mission-critical applications.

Frequently Asked Questions (FAQ)

Q: Can RMCF2010FT9M09 be used as a direct replacement for RVC2010FT9M09?

A: Yes. Both parts share identical resistance (9.09 MOhms), tolerance (±1%), package (2010), and composition (Thick Film). The RMCF2010FT9M09 provides enhanced specifications without compromising functional compatibility.

Q: What is the significance of the power rating difference?

A: The RVC2010FT9M09 is rated at 0.5W while the RMCF2010FT9M09 is rated at 0.75W. In applications where the original design operates below 0.5W dissipation, the substitute provides additional thermal margin. In applications requiring exactly 0.5W operation, both parts are functionally equivalent.

Q: Are there PCB layout considerations when substituting these parts?

A: No. Both parts use identical footprint dimensions (0.197" L x 0.098" W / 5.00mm x 2.50mm). The maximum seated height difference (0.002" / 0.05mm) is within standard PCB assembly tolerances and does not require layout modifications.

Q: Does the temperature coefficient difference affect circuit performance?

A: The RMCF2010FT9M09 has a tighter temperature coefficient (±100ppm/°C vs ±200ppm/°C), resulting in improved resistance stability across the operating temperature range (-55°C ~ 155°C). This provides enhanced performance in temperature-sensitive applications.

Q: What is the significance of AEC-Q200 qualification on the substitute part?

A: AEC-Q200 is an automotive industry standard for passive component reliability. The RMCF2010FT9M09 carries this qualification, making it suitable for automotive applications. The RVC2010FT9M09 does not carry this designation.

Q: Are both parts available in the same packaging formats?

A: The RVC2010FT9M09 is supplied in Tape & Reel (TR) format. The RMCF2010FT9M09 is supplied in Cut Tape (CT) format. Both formats are standard for component distribution and do not affect functional compatibility.