RVC2010FT475K Equivalent & Substitute Parts

Part Overview

The RVC2010FT475K is a 475 kOhms ±1% 0.5W thick film chip resistor in 2010 (5025 Metric) package format, manufactured by Stackpole Electronics Inc. This component is classified as Active product status with full RoHS3 compliance and unlimited moisture sensitivity rating. Substitute parts are identified when equivalent electrical specifications and mechanical compatibility are maintained across the same package footprint and performance envelope.

Substiute Parts

RVC2010FT475K

Stackpole Electronics IncIn Stock: 795RVC2010FT475K Datasheet

Current PartRFQ

CRCW2010475KFKEF

Vishay DaleIn Stock: 7605CRCW2010475KFKEF Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the RVC2010FT475K is determined by the following criteria:

Mandatory Matching Parameters:

• Resistance value: 475 kOhms
• Tolerance: ±1%
• Package / Case: 2010 (5025 Metric)
• Composition: Thick Film
• Temperature Coefficient: ±100ppm/°C
• Operating Temperature Range: -55°C ~ 155°C
• RoHS3 Compliance
• Moisture Sensitivity Level: 1 (Unlimited)

Allowable Variation:

• Power rating may exceed the original specification (0.5W minimum requirement)
• Additional certifications (such as AEC-Q200) do not disqualify substitution

The CRCW2010475KFKEF from Vishay Dale meets all mandatory parameters while providing enhanced power rating (0.75W) and automotive qualification, making it a valid substitute.

Parameter Comparison

Engineering Selection Recommendations

Both the RVC2010FT475K and CRCW2010475KFKEF are Active status components with full RoHS3 compliance and identical moisture sensitivity ratings. The CRCW2010475KFKEF provides additional AEC-Q200 automotive qualification and higher power dissipation capability (0.75W versus 0.5W), making it suitable for applications requiring automotive-grade reliability or higher thermal margins. The marginal height difference (0.028" versus 0.026") remains within standard PCB assembly tolerances for 2010 package footprints. Selection between these parts should be based on application-specific requirements for automotive qualification and thermal performance.

Frequently Asked Questions (FAQ)

Q: Can the CRCW2010475KFKEF replace the RVC2010FT475K in existing designs?

A: Yes. Both components share identical resistance value (475 kOhms), tolerance (±1%), package footprint (2010 / 5025 Metric), temperature coefficient (±100ppm/°C), and operating temperature range (-55°C ~ 155°C). The CRCW2010475KFKEF's higher power rating (0.75W) and automotive certification do not create incompatibility.

Q: What is the significance of the power rating difference?

A: The RVC2010FT475K is rated for 0.5W dissipation, while the CRCW2010475KFKEF is rated for 0.75W. In applications where the original design operates below 0.5W, the substitute provides additional thermal margin. Applications requiring exactly 0.5W operation remain compatible with both parts.

Q: Are there package footprint differences?

A: Both components use the 2010 (5025 Metric) package with identical length and width (0.197" L x 0.098" W / 5.00mm x 2.50mm). Maximum seated height differs by 0.002" (0.028" versus 0.026"), which is negligible for standard PCB assembly processes.

Q: Does AEC-Q200 certification affect substitution eligibility?

A: No. AEC-Q200 is an additional qualification that does not disqualify the CRCW2010475KFKEF as a substitute. It represents enhanced reliability testing suitable for automotive applications but does not impact compatibility in non-automotive designs.

Q: Are both parts RoHS3 compliant?

A: Yes. Both the RVC2010FT475K and CRCW2010475KFKEF are ROHS3 compliant with unlimited moisture sensitivity (MSL 1), meeting current environmental and regulatory requirements.