RVC1206JT470K Equivalent & Substitute Parts

Part Overview

The RVC1206JT470K is a 470 kOhms ±5% 0.25W thick film chip resistor in 1206 (3216 Metric) package manufactured by Stackpole Electronics Inc. This component is classified as Active product status with ROHS3 compliance and unlimited moisture sensitivity level (MSL 1). Substitute parts are identified based on matching electrical specifications (resistance value and tolerance), mechanical compatibility (package type and dimensions), and thermal operating range, ensuring direct functional equivalence in circuit applications.

Substiute Parts

RVC1206JT470K

Stackpole Electronics IncIn Stock: 1037RVC1206JT470K Datasheet

Current PartRFQ

RMCF1206FT470K

Stackpole Electronics IncIn Stock: 5684RMCF1206FT470K Datasheet

UpgradeRFQ

CRM1206-FX-4703ELF

Bourns Inc.In Stock: 15814CRM1206-FX-4703ELF Datasheet

UpgradeRFQ

AC1206JR-07470KL

YAGEOIn Stock: 9512AC1206JR-07470KL Datasheet

MFR RecommendedRFQ

CHR1206H-470KJ8

RiedonIn Stock: 1288CHR1206H-470KJ8 Datasheet

MFR RecommendedRFQ

RC1206JR-07470KL

YAGEOIn Stock: 5144RC1206JR-07470KL Datasheet

MFR RecommendedRFQ

RC3216J474CS

Samsung Electro-MechanicsIn Stock: 961RC3216J474CS Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the RVC1206JT470K are qualified based on the following criteria:

Primary Substitution Criteria:

• Resistance value: 470 kOhms (exact match required)
• Package type: 1206 (3216 Metric) (exact match required)
• Composition: Thick Film (exact match required)
• Temperature Coefficient: ±100ppm/°C (exact match required)
• Operating Temperature Range: -55°C ~ 155°C minimum (equal or extended range acceptable)
• RoHS Status: ROHS3 Compliant (minimum requirement)
• Moisture Sensitivity Level: MSL 1 (exact match required)

Secondary Compatibility Factors:

• Tolerance: ±5% (primary specification; ±1% tolerance parts are upgrades with improved accuracy)
• Power Rating: 0.25W (primary specification; 0.5W rating parts are upgrades with increased thermal capacity)
• Termination count: 2 (exact match required)
• Packaging format: Tape & Reel or Cut Tape & Digi-Reel (both acceptable for assembly compatibility)

Substitute parts are grouped into two categories: direct equivalents (matching all primary criteria) and upgraded alternatives (enhanced tolerance or power rating while maintaining core electrical and mechanical compatibility).

Parameter Comparison

Engineering Selection Recommendations

Direct Equivalents (Identical Specifications): AC1206JR-07470KL (YAGEO), RC1206JR-07470KL (YAGEO), and RC3216J474CS (Samsung Electro-Mechanics) provide direct functional equivalence to the RVC1206JT470K. All three maintain ±5% tolerance, 0.25W power rating, and identical operating temperature range. These parts are suitable for one-to-one replacement in existing designs. AC1206JR-07470KL and RC1206JR-07470KL include automotive AEC-Q200 certification and moisture-resistant features, providing enhanced reliability in demanding environments.

Upgraded Tolerance Alternative: RMCF1206FT470K (Stackpole Electronics Inc) offers improved ±1% tolerance while maintaining identical power rating, package, and thermal specifications. This upgrade is applicable in circuits requiring tighter resistance accuracy. Automotive AEC-Q200 certification is included.

Upgraded Power Rating Alternative: CRM1206-FX-4703ELF (Bourns Inc.) provides 0.5W power rating with ±1% tolerance in the same 1206 package. This upgrade accommodates higher dissipation requirements while maintaining all other electrical and mechanical parameters. Current sense feature is specified.

Extended Temperature Range Alternative: CHR1206H-470KJ8 (Riedon) extends operating temperature to -55°C ~ 300°C while maintaining ±5% tolerance and 0.25W rating. Non-magnetic composition is specified. This option is applicable for high-temperature circuit applications. REACH status is affected for this part.

All substitute parts maintain ROHS3 compliance and MSL 1 rating, ensuring compatibility with standard assembly and storage requirements.

Frequently Asked Questions (FAQ)

Q: Can RMCF1206FT470K replace RVC1206JT470K directly? A: Yes. RMCF1206FT470K is a direct substitute with improved ±1% tolerance. All mechanical, thermal, and compliance parameters are identical. The tighter tolerance provides enhanced accuracy without affecting circuit compatibility.

Q: What is the difference between AC1206JR-07470KL and RC1206JR-07470KL? A: Both are YAGEO 470 kOhms ±5% 0.25W 1206 resistors with identical electrical and mechanical specifications. AC1206JR-07470KL includes automotive AEC-Q200 certification and moisture-resistant features. RC1206JR-07470KL includes moisture-resistant features. Packaging differs: AC uses Tape & Reel; RC uses Cut Tape & Digi-Reel.

Q: When should CRM1206-FX-4703ELF be selected over the original part? A: CRM1206-FX-4703ELF is selected when circuit design requires higher power dissipation capacity (0.5W vs. 0.25W) or improved tolerance accuracy (±1% vs. ±5%). The 1206 package dimensions remain compatible with existing PCB layouts.

Q: Is CHR1206H-470KJ8 suitable for standard temperature range applications? A: Yes. CHR1206H-470KJ8 operates across -55°C ~ 300°C, which exceeds the standard -55°C ~ 155°C range. It is fully compatible with standard temperature applications. The extended range provides design flexibility for future thermal requirement changes.

Q: Are all substitute parts ROHS3 compliant? A: All substitute parts listed are ROHS3 compliant except CHR1206H-470KJ8, which has REACH status affected. Verify REACH compliance requirements for your specific application and region.

Q: Does package dimension variation affect PCB assembly compatibility? A: All parts use 1206 (3216 Metric) package classification. Minor dimension variations (within 0.004" / 0.10mm) do not affect standard PCB footprint compatibility or automated assembly processes. Verify specific footprint requirements with your PCB design tool.

Q: Can these parts be used interchangeably in automotive applications? A: AC1206JR-07470KL and RMCF1206FT470K include automotive AEC-Q200 certification. Other parts are suitable for automotive use based on circuit requirements, but AEC-Q200 certification is not specified. Consult design specifications for automotive qualification requirements.