RVC1206JT2M40 Equivalent & Substitute Parts

Part Overview

The RVC1206JT2M40 is a 2.4 MOhms ±5% 0.25W thick film chip resistor in 1206 (3216 Metric) package manufactured by Stackpole Electronics Inc. This component is actively produced and widely used in general-purpose electronic applications requiring high-resistance values with standard tolerance specifications. Substitute parts are identified to provide design flexibility, accommodate supply chain variations, and enable selection of components with enhanced specifications such as improved tolerance or automotive-grade certifications.

Substiute Parts

RVC1206JT2M40

Stackpole Electronics IncIn Stock: 1244RVC1206JT2M40 Datasheet

Current PartRFQ

RMCF1206FT2M40

Stackpole Electronics IncIn Stock: 10610RMCF1206FT2M40 Datasheet

UpgradeRFQ

RMCF1206JG2M40

Stackpole Electronics IncIn Stock: 4725RMCF1206JG2M40 Datasheet

UpgradeRFQ

RMCF1206JT2M40

Stackpole Electronics IncIn Stock: 2212RMCF1206JT2M40 Datasheet

UpgradeRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the RVC1206JT2M40 are qualified based on the following criteria:

Electrical Parameters (Must Match):

• Resistance value: 2.4 MOhms
• Power rating: 0.25W (1/4W)
• Package / Case: 1206 (3216 Metric)
• Composition: Thick Film
• Temperature coefficient: ±200ppm/°C
• Operating temperature range: -55°C ~ 155°C

Allowable Variations:

• Tolerance: ±5% (original specification) or tighter tolerance (±1%)
• Packaging format: Tape & Reel (TR) or Cut Tape (CT)
• Series designation: RVC or RMCF
• Certifications: Standard or Automotive AEC-Q200

Compliance Requirements (Must Match):

• RoHS3 Compliant
• Moisture Sensitivity Level 1 (Unlimited)

Substitute parts meeting these criteria are electrically and mechanically interchangeable with the RVC1206JT2M40 in standard applications.

Parameter Comparison

Engineering Selection Recommendations

RMCF1206FT2M40 is suitable for applications requiring tighter tolerance control (±1% vs ±5%) and automotive-grade reliability. This part carries AEC-Q200 certification, making it appropriate for automotive and high-reliability applications where component stability is critical.

RMCF1206JG2M40 provides automotive-grade qualification (AEC-Q200) with matching ±5% tolerance in Cut Tape packaging format. This option is appropriate for applications requiring automotive certification where tape reel format is not required.

RMCF1206JT2M40 is a direct functional equivalent with automotive-grade AEC-Q200 certification in Tape & Reel packaging. This part maintains the same tolerance specification (±5%) and packaging format as the original RVC1206JT2M40, with the addition of automotive qualification.

All substitute parts maintain active product status and full compliance with RoHS3 and moisture sensitivity requirements.

Frequently Asked Questions (FAQ)

Q: Can RMCF1206FT2M40 be used as a direct replacement for RVC1206JT2M40?

A: Yes. Both parts share identical electrical specifications (2.4 MOhms, 0.25W, 1206 package, thick film composition, ±200ppm/°C temperature coefficient, -55°C to 155°C operating range). RMCF1206FT2M40 offers improved tolerance (±1% vs ±5%) and automotive AEC-Q200 certification. Physical dimensions differ slightly (RMCF: 3.20mm x 1.60mm vs RVC: 3.10mm x 1.55mm), but both conform to 1206 package specifications and are mechanically compatible.

Q: What is the difference between Tape & Reel and Cut Tape packaging?

A: Tape & Reel (TR) packaging is supplied on continuous carrier tape wound on reels, suitable for automated assembly processes. Cut Tape (CT) packaging is supplied as individual segments cut from the carrier tape, suitable for manual assembly or smaller quantity requirements. Electrical and mechanical specifications remain identical; packaging format selection depends on assembly method and volume requirements.

Q: Are all substitute parts RoHS3 compliant?

A: Yes. RVC1206JT2M40 and all listed substitute parts (RMCF1206FT2M40, RMCF1206JG2M40, RMCF1206JT2M40) are ROHS3 Compliant with Moisture Sensitivity Level 1 (Unlimited).

Q: What does AEC-Q200 certification mean?

A: AEC-Q200 is an automotive electronics qualification standard. Parts carrying this certification meet stringent reliability, temperature cycling, and performance requirements for automotive applications. RMCF series parts with AEC-Q200 rating are suitable for automotive and high-reliability industrial applications.

Q: Can I substitute a ±1% tolerance part for a ±5% tolerance part?

A: Yes. A component with tighter tolerance (±1%) can replace one specified at ±5% tolerance. The tighter tolerance provides improved accuracy and stability. However, the reverse substitution (±5% for ±1%) is not appropriate for applications requiring the tighter tolerance specification.