RVC1206JT150R Equivalent & Substitute Parts

Part Overview

The RVC1206JT150R is a 150 Ohm ±5% 0.25W thick film chip resistor in 1206 (3216 Metric) package manufactured by Stackpole Electronics Inc. This component is currently active in production with 907 pieces in stock. Equivalent and substitute parts are necessary when the primary part becomes unavailable, when design requirements call for enhanced specifications such as automotive qualification or moisture resistance, or when supply chain optimization requires component standardization across manufacturing facilities.

Substiute Parts

RVC1206JT150R

Stackpole Electronics IncIn Stock: 997RVC1206JT150R Datasheet

Current PartRFQ

RMCF1206JG150R

Stackpole Electronics IncIn Stock: 10767RMCF1206JG150R Datasheet

UpgradeRFQ

CRCW1206150RJNEAC

Vishay DaleIn Stock: 30805CRCW1206150RJNEAC Datasheet

DirectRFQ

MCR18ERTJ151

Rohm SemiconductorIn Stock: 851MCR18ERTJ151 Datasheet

DirectRFQ

CR1206-JW-151ELF

Bourns Inc.In Stock: 39417CR1206-JW-151ELF Datasheet

UpgradeRFQ

CRCW1206150RJNEAIF

Vishay DaleIn Stock: 5802CRCW1206150RJNEAIF Datasheet

UpgradeRFQ

ESR18EZPJ151

Rohm SemiconductorIn Stock: 13413ESR18EZPJ151 Datasheet

UpgradeRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the RVC1206JT150R is determined by strict adherence to the following core parameters: resistance value (150 Ohms), tolerance (±5%), power rating (0.25W minimum), package type (1206), composition (thick film), temperature coefficient (±200ppm/°C), operating temperature range (-55°C ~ 155°C), and compliance certifications (ROHS3, REACH Unaffected).

Substitute parts are categorized into three groups:

Direct Equivalents maintain all electrical and mechanical specifications identical to the main part. These parts are interchangeable without design modification.

Upgrade Substitutes exceed the main part specifications while maintaining full backward compatibility. These include automotive-qualified variants (AEC-Q200), moisture-resistant formulations, pulse-withstanding capabilities, or higher power ratings. Upgrade substitutes can replace the main part in any application.

Discontinued Alternatives are parts that meet all electrical specifications but are no longer in active production. These are listed for reference in legacy system support or when existing inventory must be utilized.

Parameter Comparison

Engineering Selection Recommendations

For Standard Applications: CRCW1206150RJNEAC (Vishay Dale) provides direct electrical and mechanical equivalence with the highest inventory availability (30753 pieces). This part is ROHS3 compliant and maintains identical operating specifications.

For Automotive Applications: RMCF1206JG150R (Stackpole Electronics Inc) or CRCW1206150RJNEAIF (Vishay Dale) are recommended. Both carry AEC-Q200 automotive qualification and are active in production. CRCW1206150RJNEAIF additionally provides pulse-withstanding capability.

For Moisture-Critical Environments: CR1206-JW-151ELF (Bourns Inc.) incorporates moisture-resistant formulation while maintaining all core electrical specifications. This part is active with substantial inventory (39312 pieces).

For Higher Power Margin Applications: ESR18EZPJ151 (Rohm Semiconductor) provides doubled power rating (0.5W vs 0.25W) in the same 1206 package with automotive AEC-Q200 qualification and pulse-withstanding features. This upgrade is suitable when thermal margin or transient stress tolerance is required.

Avoid: MCR18ERTJ151 (Rohm Semiconductor) is discontinued at DiGi Electronics and should not be selected for new designs, though existing inventory may be used for legacy system support.

Frequently Asked Questions (FAQ)

Q: Can RMCF1206JG150R replace RVC1206JT150R directly? A: Yes. RMCF1206JG150R maintains identical electrical specifications (150 Ohms ±5%, 0.25W) and package type (1206). The addition of AEC-Q200 automotive qualification does not prevent use in non-automotive applications. This is a direct substitute with enhanced qualification.

Q: What is the difference between CRCW1206150RJNEAC and CRCW1206150RJNEAIF? A: Both are Vishay Dale 150 Ohm ±5% 0.25W 1206 resistors. CRCW1206150RJNEAIF adds automotive AEC-Q200 qualification and pulse-withstanding capability. CRCW1206150RJNEAC is the standard industrial version. Selection depends on application requirements.

Q: Why is ESR18EZPJ151 listed as a substitute if it has 0.5W power rating instead of 0.25W? A: ESR18EZPJ151 is an upgrade substitute. The higher power rating (0.5W vs 0.25W) provides additional thermal margin and stress tolerance while maintaining all other specifications. It is mechanically and electrically compatible in the 1206 package and can replace the 0.25W part in any application where the higher power rating does not create design conflicts.

Q: Are all substitute parts ROHS3 compliant? A: Yes. All listed substitute parts are ROHS3 compliant and REACH unaffected, matching the compliance status of the main part RVC1206JT150R.

Q: Can I use CR1206-JW-151ELF in high-humidity environments? A: CR1206-JW-151ELF incorporates moisture-resistant formulation, making it suitable for high-humidity applications. However, all listed parts maintain MSL 1 (Unlimited) moisture sensitivity level, indicating they do not require special moisture control during storage or handling.

Q: What is the physical size difference between the main part and substitutes? A: All parts use the 1206 (3216 Metric) package. Minor dimensional variations exist within manufacturing tolerances (length 0.120" to 0.126", width 0.061" to 0.063", height 0.024" to 0.030"). These variations are within standard PCB pad tolerances and do not affect interchangeability.