RVC1206FT301K Equivalent & Substitute Parts

Part Overview

The RVC1206FT301K is a 301 kOhms ±1% 0.25W thick film chip resistor in 1206 (3216 Metric) surface mount package manufactured by Stackpole Electronics Inc. This component is currently active in production. Equivalent and substitute parts are identified based on matching electrical specifications, package dimensions, and mechanical compatibility to support design flexibility, inventory optimization, and supply chain continuity.

Substiute Parts

RVC1206FT301K

Stackpole Electronics IncIn Stock: 855RVC1206FT301K Datasheet

Current PartRFQ

RMCF1206FG301K

Stackpole Electronics IncIn Stock: 13768RMCF1206FG301K Datasheet

DirectRFQ

RMCF1206FT301K

Stackpole Electronics IncIn Stock: 115996RMCF1206FT301K Datasheet

DirectRFQ

CR1206-FX-3013ELF

Bourns Inc.In Stock: 35224CR1206-FX-3013ELF Datasheet

DirectRFQ

CRCW1206301KFKEA

Vishay DaleIn Stock: 23508CRCW1206301KFKEA Datasheet

DirectRFQ

ERJ-8ENF3013V

Panasonic Electronic ComponentsIn Stock: 2090ERJ-8ENF3013V Datasheet

DirectRFQ

MCR18ERTF3013

Rohm SemiconductorIn Stock: 7868MCR18ERTF3013 Datasheet

DirectRFQ

RC1206FR-07301KL

YAGEOIn Stock: 6199RC1206FR-07301KL Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the RVC1206FT301K are qualified based on the following criteria:

• Resistance value: 301 kOhms
• Tolerance: ±1%
• Power rating: 0.25W (1/4W)
• Package: 1206 (3216 Metric)
• Composition: Thick Film
• Temperature coefficient: ±100ppm/°C
• Operating temperature range: -55°C ~ 155°C
• RoHS3 compliance
• MSL rating: 1 (Unlimited)

Substitute parts may include additional features such as automotive AEC-Q200 qualification or moisture-resistant construction, which do not prevent substitution but represent enhanced specifications suitable for specific application requirements.

Parameter Comparison

Engineering Selection Recommendations

For new designs and ongoing production, select from parts with Active product status:

• RMCF1206FT301K and RMCF1206FG301K (Stackpole) are recommended for automotive applications requiring AEC-Q200 qualification.
• CRCW1206301KFKEA (Vishay Dale) provides automotive AEC-Q200 qualification with the lowest seated height (0.024").
• CR1206-FX-3013ELF (Bourns) and RC1206FR-07301KL (YAGEO) are suitable for general-purpose applications with moisture-resistant construction.

Parts with Not For New Designs or Discontinued status should not be selected for new product development. ERJ-8ENF3013V is available in current inventory but is designated Not For New Designs. MCR18ERTF3013 is discontinued and should not be used for new designs.

Frequently Asked Questions (FAQ)

Q: Can I substitute the RVC1206FT301K with any of these parts?

A: Yes, all listed parts meet the core electrical and mechanical specifications: 301 kOhms ±1%, 0.25W power rating, 1206 package, ±100ppm/°C temperature coefficient, and -55°C to 155°C operating range. Physical dimensions vary slightly within acceptable tolerances for 1206 package placement.

Q: What is the difference between standard and automotive-qualified versions?

A: Automotive AEC-Q200 qualified parts (RMCF1206FT301K, RMCF1206FG301K, CRCW1206301KFKEA, ERJ-8ENF3013V) meet additional reliability and qualification requirements for automotive applications. Standard versions (RVC1206FT301K, MCR18ERTF3013) do not carry this certification.

Q: Are moisture-resistant versions interchangeable?

A: Yes. CR1206-FX-3013ELF and RC1206FR-07301KL include moisture-resistant construction but maintain identical electrical specifications and package compatibility. This feature provides enhanced reliability in humid environments without affecting circuit performance.

Q: What are the physical dimension differences?

A: All parts use the 1206 (3216 Metric) package. Seated heights range from 0.024" to 0.030" (0.60mm to 0.75mm). Length and width vary slightly (0.120" to 0.126" L, 0.061" to 0.063" W). These variations are within standard 1206 package tolerances and do not affect PCB layout or reflow soldering.

Q: Should I avoid parts marked "Not For New Designs"?

A: Yes. ERJ-8ENF3013V is designated Not For New Designs. Use only for replacement or repair of existing assemblies. For new product development, select from Active status parts.

Q: Are all parts RoHS3 compliant?

A: Yes. All listed parts are ROHS3 compliant with MSL rating 1 (Unlimited moisture sensitivity level), suitable for standard PCB assembly processes without special handling requirements.