RVC1206FT210K Equivalent & Substitute Parts

Part Overview

The RVC1206FT210K is a 210 kOhms ±1% 0.25W thick film chip resistor in 1206 (3216 Metric) package manufactured by Stackpole Electronics Inc. This component is currently active in production with 1144 units in stock. Substitute parts become necessary when the primary part experiences supply constraints, extended lead times, or when design requirements call for enhanced specifications such as automotive-grade qualification or alternative sourcing from qualified manufacturers.

Substiute Parts

RVC1206FT210K

Stackpole Electronics IncIn Stock: 1204RVC1206FT210K Datasheet

Current PartRFQ

RMCF1206FT210K

Stackpole Electronics IncIn Stock: 3949RMCF1206FT210K Datasheet

UpgradeRFQ

MCR18ERTF2103

Rohm SemiconductorIn Stock: 1362MCR18ERTF2103 Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the RVC1206FT210K are qualified based on the following electrical and mechanical parameters:

Electrical Equivalence Requirements:

• Resistance value: 210 kOhms
• Tolerance: ±1%
• Power rating: 0.25W (1/4W)
• Temperature coefficient: ±100ppm/°C
• Operating temperature range: -55°C ~ 155°C

Mechanical Equivalence Requirements:

• Package / Case: 1206 (3216 Metric)
• Composition: Thick Film
• Number of terminations: 2
• Moisture Sensitivity Level: 1 (Unlimited)

Compliance Requirements:

• RoHS3 Compliant
• REACH Unaffected

Two substitute parts meet these criteria:

1. RMCF1206FT210K (Stackpole Electronics Inc) – Upgrade option with automotive AEC-Q200 qualification
2. MCR18ERTF2103 (Rohm Semiconductor) – Direct equivalent with identical electrical specifications

Parameter Comparison

Engineering Selection Recommendations

RMCF1206FT210K is the preferred upgrade substitute. It maintains identical electrical and mechanical specifications while adding automotive AEC-Q200 qualification. This part is manufactured by the same supplier (Stackpole Electronics Inc), carries higher inventory availability (3929 units), and remains in active production status. Selection of this part is appropriate for applications requiring enhanced reliability or automotive-grade component qualification.

MCR18ERTF2103 is a direct electrical and mechanical equivalent manufactured by Rohm Semiconductor. This part meets all substitution criteria but carries a discontinued status at DiGi Electronics. Selection of this part should be limited to applications where existing supply channels remain viable or where secondary sourcing is established. Dimensional variations exist within tolerance (3.05mm vs 3.10mm length), which do not affect functional compatibility in standard PCB layouts.

Frequently Asked Questions (FAQ)

Q: Can RMCF1206FT210K be used as a direct replacement for RVC1206FT210K?

A: Yes. Both parts share identical electrical specifications (210 kOhms ±1%, 0.25W, ±100ppm/°C, -55°C ~ 155°C), identical package designation (1206), and identical compliance certifications (ROHS3, REACH Unaffected). The RMCF series adds automotive AEC-Q200 qualification, making it suitable for all applications where RVC1206FT210K is specified.

Q: What is the difference between RVC and RMCF series from Stackpole?

A: The RMCF1206FT210K includes automotive AEC-Q200 qualification, indicating enhanced reliability testing and qualification for automotive applications. Electrical and mechanical parameters remain identical. The RMCF series carries higher inventory levels and active production status.

Q: Can MCR18ERTF2103 be used in place of RVC1206FT210K?

A: Yes, from an electrical and mechanical standpoint. MCR18ERTF2103 meets all substitution criteria with identical resistance, tolerance, power rating, temperature coefficient, and operating range. However, this part is discontinued at DiGi Electronics. Compatibility depends on maintaining alternative supply channels.

Q: Are there dimensional differences between these parts?

A: Minor dimensional variations exist within manufacturing tolerance. RVC1206FT210K and MCR18ERTF2103 measure 3.10mm length, while RMCF1206FT210K measures 3.20mm length. All three parts conform to the 1206 (3216 Metric) package standard and are compatible with standard PCB layouts designed for this package.

Q: Which part should be selected for new designs?

A: RMCF1206FT210K is the recommended selection for new designs. It maintains full electrical and mechanical compatibility while offering automotive-grade qualification, higher inventory availability, and active production status from the original manufacturer.

Q: What is the MSL rating and why does it matter?

A: All three parts carry MSL 1 (Unlimited) rating, indicating no moisture sensitivity restrictions. These components do not require special moisture control during storage, handling, or assembly, simplifying supply chain management and manufacturing processes.