RVC1206FT150R Equivalent & Substitute Parts

Part Overview

The RVC1206FT150R is a 150 Ohm ±1% 0.25W thick film chip resistor in 1206 (3216 Metric) package manufactured by Stackpole Electronics Inc. This component is actively produced and widely used in general-purpose electronic applications. Substitute parts become necessary when the primary part reaches end-of-life status, inventory constraints occur, or design requirements call for enhanced specifications such as automotive qualification or improved temperature coefficients.

Key Parameters

Parameter	Value
Resistance	150 Ohms
Tolerance	±1%
Power Rating	0.25W (1/4W)
Package	1206 (3216 Metric)
Composition	Thick Film
Operating Temperature Range	-55°C to 155°C
RoHS Status	ROHS3 Compliant
Moisture Sensitivity Level	1 (Unlimited)

Substitute Part Grouping Explanation

Substitution eligibility is determined by strict equivalence across the following parameters: resistance value (150 Ohms), tolerance (±1%), power rating (0.25W), package type (1206), composition (thick film), operating temperature range (-55°C to 155°C), and compliance certifications (ROHS3, REACH Unaffected). All listed substitute parts meet these core requirements.

Substitute parts are grouped into three categories based on additional features:

Standard Equivalents – Parts with identical core specifications and no additional certifications: CRG1206F150R (TE Connectivity), RC1206FR-07150RL (YAGEO), MCR18ERTF1500 (Rohm).

Automotive-Qualified Equivalents – Parts meeting AEC-Q200 automotive standards with improved temperature coefficients (±100ppm/°C vs. ±200ppm/°C): RMCF1206FG150R, RMCF1206FT150R (Stackpole), ERJ-8ENF1500V (Panasonic), KTR18EZPF1500 (Rohm).

Enhanced Feature Equivalents – Parts with moisture-resistant or high-voltage specifications: CR1206-FX-1500ELF (Bourns).

Parameter Comparison

Manufacturer Part Number	Manufacturer	Resistance	Tolerance	Power (W)	Temp Coeff (ppm/°C)	Operating Temp (°C)	Package	Features	Product Status
RVC1206FT150R	Stackpole Electronics Inc	150 Ω	±1%	0.25	±200	-55 to 155	1206	—	Active
RMCF1206FG150R	Stackpole Electronics Inc	150 Ω	±1%	0.25	±100	-55 to 155	1206	Automotive AEC-Q200	Active
RMCF1206FT150R	Stackpole Electronics Inc	150 Ω	±1%	0.25	±100	-55 to 155	1206	Automotive AEC-Q200	Active
CR1206-FX-1500ELF	Bourns Inc.	150 Ω	±1%	0.25	±100	-55 to 155	1206	Moisture Resistant	Active
CRG1206F150R	TE Connectivity Passive Product	150 Ω	±1%	0.25	±100	-55 to 155	1206	—	Active
ERJ-8ENF1500V	Panasonic Electronic Components	150 Ω	±1%	0.25	±100	-55 to 155	1206	Automotive AEC-Q200	Not For New Designs
KTR18EZPF1500	Rohm Semiconductor	150 Ω	±1%	0.25	±100	-55 to 155	1206	Automotive AEC-Q200, High Voltage	Active
MCR18ERTF1500	Rohm Semiconductor	150 Ω	±1%	0.25	±100	-55 to 155	1206	—	Discontinued at DiGi Electronics
RC1206FR-07150RL	YAGEO	150 Ω	±1%	0.25	±100	-55 to 155	1206	Moisture Resistant	Active

Engineering Selection Recommendations

For general-purpose applications with no specific environmental or automotive requirements: CRG1206F150R (TE Connectivity) and RC1206FR-07150RL (YAGEO) are direct functional equivalents with active product status and improved temperature coefficients (±100ppm/°C).

For automotive applications requiring AEC-Q200 qualification: RMCF1206FT150R (Stackpole, Tape & Reel packaging) and RMCF1206FG150R (Stackpole, Cut Tape packaging) are preferred. Both are actively produced with high inventory availability and improved temperature stability. KTR18EZPF1500 (Rohm) provides additional high-voltage capability for demanding automotive circuits.

For moisture-sensitive environments: CR1206-FX-1500ELF (Bourns) and RC1206FR-07150RL (YAGEO) incorporate moisture-resistant specifications.

Parts to avoid for new designs: ERJ-8ENF1500V (Panasonic) carries "Not For New Designs" status. MCR18ERTF1500 (Rohm) is discontinued at DiGi Electronics and has limited inventory.

All substitute parts maintain ROHS3 compliance, REACH Unaffected status, and MSL 1 (Unlimited) moisture sensitivity rating, ensuring compatibility with standard manufacturing and storage protocols.

Frequently Asked Questions (FAQ)

Q: Can I use any of these substitute parts as a direct drop-in replacement for the RVC1206FT150R?

A: Yes, all listed substitute parts are electrically and mechanically compatible. They share identical resistance (150 Ohms), tolerance (±1%), power rating (0.25W), package (1206), and operating temperature range (-55°C to 155°C). Physical dimensions vary slightly within acceptable tolerances for 1206 package specifications.

Q: What is the difference between the Stackpole RVC and RMCF series?

A: The RVC series is a standard thick film resistor with a temperature coefficient of ±200ppm/°C. The RMCF series is automotive-qualified (AEC-Q200) with an improved temperature coefficient of ±100ppm/°C, making it suitable for temperature-sensitive automotive circuits.

Q: Why do some parts have different packaging options (Tape & Reel vs. Cut Tape)?

A: Packaging affects handling and assembly processes. Tape & Reel (TR) is optimized for automated pick-and-place assembly in high-volume production. Cut Tape (CT) is suitable for lower-volume applications or manual assembly. Electrical and mechanical specifications remain identical.

Q: Is the ERJ-8ENF1500V still available for purchase?

A: ERJ-8ENF1500V carries "Not For New Designs" status and is not recommended for new product development. However, 102,264 pieces remain in inventory. For new designs, select RMCF1206FT150R, CRG1206F150R, or KTR18EZPF1500.

Q: What does AEC-Q200 qualification mean?

A: AEC-Q200 is an automotive industry standard (Automotive Electronics Council) that certifies components for reliability in automotive environments. It requires enhanced testing for temperature cycling, humidity, and mechanical stress. Parts with this certification are suitable for automotive applications.

Q: Can I mix different substitute parts in the same circuit board?

A: Yes. All substitute parts meet identical electrical specifications and are mechanically compatible within 1206 package tolerances. Mixing manufacturers is acceptable from an engineering standpoint, though single-source procurement is often preferred for supply chain consistency.

Q: What is the significance of the ±100ppm/°C vs. ±200ppm/°C temperature coefficient difference?

A: Temperature coefficient defines how much the resistance value changes with temperature. ±100ppm/°C (automotive-qualified parts) provides better stability across temperature extremes than ±200ppm/°C (standard parts). For precision circuits operating across wide temperature ranges, the lower coefficient is preferable.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message