RVC0805FT280K Equivalent & Substitute Parts

Part Overview

The RVC0805FT280K is a 280 kOhms ±1% 0.125W thick film chip resistor in 0805 (2012 Metric) package manufactured by Stackpole Electronics Inc. This component is currently active in production with 968 pieces in stock. Equivalent and substitute parts are necessary when the primary part becomes unavailable, when design requirements mandate specific certifications such as automotive qualification, or when supply chain optimization requires sourcing from alternative manufacturers while maintaining identical electrical and mechanical specifications.

Substiute Parts

RVC0805FT280K

Stackpole Electronics IncIn Stock: 1014RVC0805FT280K Datasheet

Current PartRFQ

RMCF0805FT280K

Stackpole Electronics IncIn Stock: 15296RMCF0805FT280K Datasheet

UpgradeRFQ

MCR10ERTF2803

Rohm SemiconductorIn Stock: 1174MCR10ERTF2803 Datasheet

DirectRFQ

KTR10EZPF2803

Rohm SemiconductorIn Stock: 3771KTR10EZPF2803 Datasheet

UpgradeRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the RVC0805FT280K is determined by strict equivalence across the following parameters: resistance value (280 kOhms), tolerance (±1%), power rating (0.125W), package type (0805 2012 Metric), composition (thick film), temperature coefficient (±100ppm/°C), operating temperature range (-55°C ~ 155°C), and compliance certifications (ROHS3, MSL 1). All identified substitute parts meet these core electrical and mechanical requirements. Substitutes are categorized as either direct equivalents from alternative manufacturers or upgraded variants that include additional certifications such as automotive AEC-Q200 qualification or high voltage capability, which do not compromise compatibility with the original design.

Parameter Comparison

Engineering Selection Recommendations

RMCF0805FT280K is the primary upgrade substitute from Stackpole Electronics Inc, offering automotive AEC-Q200 certification while maintaining identical electrical specifications and superior inventory availability (15243 units). This part is suitable for applications requiring automotive-grade reliability without design modification.

KTR10EZPF2803 from Rohm Semiconductor is an upgraded substitute providing both automotive AEC-Q200 and high voltage certifications. This part is recommended for designs requiring enhanced voltage performance or automotive qualification, with active product status and adequate inventory (3743 units).

MCR10ERTF2803 from Rohm Semiconductor is a direct electrical equivalent with standard specifications. This part is currently discontinued at DiGi Electronics and should be considered only when existing inventory is available and no upgraded certifications are required.

Frequently Asked Questions (FAQ)

Q: Can RMCF0805FT280K be used as a direct replacement for RVC0805FT280K?

A: Yes. Both parts share identical electrical parameters (280 kOhms ±1%, 0.125W, ±100ppm/°C, -55°C ~ 155°C), package type (0805 2012 Metric), composition (thick film), and compliance certifications (ROHS3, MSL 1). RMCF0805FT280K includes automotive AEC-Q200 qualification, which does not restrict its use in standard applications.

Q: What is the difference between the substitute parts?

A: RMCF0805FT280K and KTR10EZPF2803 are upgraded variants with automotive AEC-Q200 certification. KTR10EZPF2803 additionally includes high voltage capability. MCR10ERTF2803 is a standard equivalent without automotive certification. All four parts are electrically and mechanically interchangeable.

Q: Are there packaging differences between these parts?

A: RVC0805FT280K, RMCF0805FT280K, and KTR10EZPF2803 are supplied in Tape & Reel (TR) packaging. MCR10ERTF2803 is supplied in Cut Tape (CT) & Digi-Reel® packaging. Both packaging formats are compatible with standard pick-and-place assembly equipment.

Q: What is the height difference between the main part and substitutes?

A: RVC0805FT280K has a maximum seated height of 0.024" (0.60mm). RMCF0805FT280K, MCR10ERTF2803, and KTR10EZPF2803 have a maximum seated height of 0.026" (0.65mm). This 0.002" (0.05mm) difference is within standard PCB assembly tolerances and does not affect compatibility.

Q: Which substitute should be selected for automotive applications?

A: RMCF0805FT280K or KTR10EZPF2803 are appropriate for automotive applications, as both carry AEC-Q200 certification. KTR10EZPF2803 provides additional high voltage capability if required by the design.

Q: Is MCR10ERTF2803 still available?

A: MCR10ERTF2803 is discontinued at DiGi Electronics but 1086 units remain in stock. This part should be selected only when existing inventory is available and no upgraded certifications are required.