RVC0805FT154R Equivalent & Substitute Parts

Part Overview

The RVC0805FT154R is a 154 Ohm ±1% 0.125W thick film chip resistor in 0805 (2012 Metric) package manufactured by Stackpole Electronics Inc. This component is currently active in production and widely used in general-purpose electronic applications requiring precision resistive elements with standard tolerance specifications.

Equivalent and substitute parts are necessary when the primary part becomes unavailable, when design requirements demand enhanced specifications such as automotive qualification, or when supply chain optimization requires sourcing from alternative manufacturers while maintaining electrical and mechanical compatibility.

Substiute Parts

RVC0805FT154R

Stackpole Electronics IncIn Stock: 1037RVC0805FT154R Datasheet

Current PartRFQ

RMCF0805FT154R

Stackpole Electronics IncIn Stock: 894RMCF0805FT154R Datasheet

UpgradeRFQ

ERJ-6ENF1540V

Panasonic Electronic ComponentsIn Stock: 65629ERJ-6ENF1540V Datasheet

UpgradeRFQ

MCR10ERTF1540

Rohm SemiconductorIn Stock: 4828MCR10ERTF1540 Datasheet

UpgradeRFQ

RC0805FR-07154RL

YAGEOIn Stock: 103330RC0805FR-07154RL Datasheet

UpgradeRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution validity for the RVC0805FT154R is determined by strict equivalence across the following parameters:

• Resistance value: 154 Ohms (exact match required)
• Tolerance: ±1% (exact match required)
• Power rating: 0.125W, 1/8W (exact match required)
• Package designation: 0805 (2012 Metric) (exact match required)
• Composition: Thick Film (exact match required)
• Operating temperature range: -55°C to 155°C minimum (equal or wider range acceptable)
• RoHS compliance: ROHS3 Compliant (required)
• Moisture sensitivity: MSL 1 (required)

All substitute parts listed meet these core electrical and mechanical requirements. Secondary enhancements such as automotive AEC-Q200 qualification or improved temperature coefficient do not disqualify a part from substitution but represent design upgrades available in certain alternatives.

Parameter Comparison

Engineering Selection Recommendations

All listed substitute parts satisfy the core electrical and mechanical requirements for direct substitution with the RVC0805FT154R. Selection among alternatives should be based on the following factors:

RMCF0805FT154R represents a direct upgrade from the same manufacturer with automotive AEC-Q200 qualification and improved temperature coefficient (±100ppm/°C versus ±200ppm/°C). This part is suitable for applications requiring enhanced reliability specifications while maintaining identical electrical performance and package dimensions.

ERJ-6ENF1540V from Panasonic provides automotive AEC-Q200 qualification with the highest inventory availability (65,546 units). The maximum seated height of 0.028" (0.70mm) is marginally higher than the primary part and should be evaluated for space-constrained PCB layouts.

MCR10ERTF1540 from Rohm Semiconductor is discontinued at DiGi Electronics and should not be selected for new designs requiring long-term supply assurance.

RC0805FR-07154RL from YAGEO offers moisture-resistant thick film construction with the lowest maximum seated height (0.024", matching the primary part) and the highest inventory availability (103,235 units). This part is suitable for general-purpose applications and cost-optimized designs.

Frequently Asked Questions (FAQ)

Q: Can I substitute the RVC0805FT154R with any of these parts without circuit redesign?

A: Yes. All listed parts are electrically and mechanically equivalent within the specified parameters. They share identical resistance, tolerance, power rating, package designation, and operating temperature range. No circuit redesign is required for direct substitution.

Q: What is the significance of the temperature coefficient difference between RVC0805FT154R (±200ppm/°C) and the substitute parts (±100ppm/°C)?

A: The temperature coefficient indicates how much the resistance value changes per degree Celsius. The substitute parts with ±100ppm/°C demonstrate superior temperature stability, meaning the resistance value remains closer to the nominal 154 Ohms across the full operating temperature range. This is a performance enhancement, not a compatibility issue.

Q: Are there any height restrictions I should consider when selecting a substitute?

A: The maximum seated heights range from 0.024" (0.60mm) to 0.028" (0.70mm). If your PCB layout has strict height constraints, verify that the selected substitute meets your specific requirements. RC0805FR-07154RL and RVC0805FT154R share the minimum height specification.

Q: What does AEC-Q200 qualification mean?

A: AEC-Q200 is an automotive industry standard qualification that certifies components for use in automotive applications. RMCF0805FT154R and ERJ-6ENF1540V carry this certification. If your application does not require automotive qualification, this certification is not necessary but represents an additional quality assurance level.

Q: Why is MCR10ERTF1540 marked as discontinued?

A: MCR10ERTF1540 is discontinued at DiGi Electronics, indicating limited future availability. For new designs or long-term production requirements, select from the active parts: RMCF0805FT154R, ERJ-6ENF1540V, or RC0805FR-07154RL.

Q: Which substitute part should I choose for cost optimization?

A: RC0805FR-07154RL from YAGEO offers the highest inventory availability (103,235 units) and is suitable for cost-sensitive applications without automotive or enhanced reliability requirements.

Q: Are all these parts RoHS3 compliant?

A: Yes. All listed parts, including the primary RVC0805FT154R, are ROHS3 Compliant and REACH Unaffected, meeting current environmental and regulatory requirements.