RV2010JK-071ML Equivalent & Substitute Parts

Part Overview

The RV2010JK-071ML is a 1 MOhms ±5% 0.75W thick film chip resistor in 2010 (5025 Metric) package manufactured by YAGEO. This component is rated for automotive applications under AEC-Q200 standard and operates across -55°C to 155°C. The part is currently active in production with 1074 units in stock.

Equivalent and substitute parts are necessary when the primary part becomes unavailable, when supply chain optimization is required, or when design flexibility across qualified manufacturers is needed while maintaining identical electrical and mechanical performance.

Substiute Parts

RV2010JK-071ML

YAGEOIn Stock: 1120RV2010JK-071ML Datasheet

Current PartRFQ

CRCW20101M00JNEF

Vishay DaleIn Stock: 20992CRCW20101M00JNEF Datasheet

MFR RecommendedRFQ

ERJ-12ZYJ105U

Panasonic Electronic ComponentsIn Stock: 940ERJ-12ZYJ105U Datasheet

MFR RecommendedRFQ

RMCF2010JT1M00

Stackpole Electronics IncIn Stock: 7429RMCF2010JT1M00 Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution for the RV2010JK-071ML is determined by strict equivalence across the following parameters:

• Resistance value: 1 MOhms
• Tolerance: ±5%
• Power rating: 0.75W
• Package designation: 2010 (5025 Metric)
• Composition: Thick Film
• Temperature coefficient: ±200ppm/°C
• Operating temperature range: -55°C to 155°C
• Automotive qualification: AEC-Q200
• Termination count: 2
• RoHS and environmental compliance: ROHS3 Compliant, REACH Unaffected

All substitute parts listed meet these criteria without exception. Physical dimensions (length, width, and maximum seated height) remain within acceptable tolerances across all qualified substitutes.

Parameter Comparison

Engineering Selection Recommendations

All three substitute parts are electrically and mechanically equivalent to the RV2010JK-071ML and are qualified for direct substitution in automotive applications requiring AEC-Q200 compliance.

CRCW20101M00JNEF (Vishay Dale) and RMCF2010JT1M00 (Stackpole Electronics Inc) are both active products with full production status. CRCW20101M00JNEF offers the highest inventory availability at 20929 units. RMCF2010JT1M00 provides 7329 units in stock.

ERJ-12ZYJ105U (Panasonic Electronic Components) carries a "Not For New Designs" status despite meeting all electrical and mechanical specifications. This designation indicates the manufacturer is phasing out this product line. While functionally equivalent, this part should be reserved for legacy system support or maintenance applications only.

Frequently Asked Questions (FAQ)

Q: Can CRCW20101M00JNEF be used as a direct replacement for RV2010JK-071ML?

A: Yes. Both parts share identical resistance (1 MOhms), tolerance (±5%), power rating (0.75W), package (2010), temperature coefficient (±200ppm/°C), operating range (-55°C to 155°C), and AEC-Q200 automotive qualification. Physical dimensions are within acceptable tolerance.

Q: Why is ERJ-12ZYJ105U marked "Not For New Designs"?

A: This designation reflects the manufacturer's product lifecycle status. The part remains functionally equivalent and fully compliant with all specifications, but Panasonic is discontinuing this series. It should not be selected for new product designs.

Q: Are all substitute parts RoHS3 compliant?

A: Yes. All listed substitutes, including the primary part, are ROHS3 Compliant and REACH Unaffected.

Q: What is the maximum seated height difference between parts?

A: The primary part (RV2010JK-071ML) has a maximum seated height of 0.026" (0.65mm). All substitutes have a maximum seated height of 0.028" (0.70mm). This 0.002" (0.05mm) difference is within standard PCB assembly tolerances.

Q: Can these parts be used interchangeably in automotive applications?

A: Yes. All parts carry AEC-Q200 automotive qualification and operate across the identical temperature range (-55°C to 155°C) with matching electrical characteristics. They are suitable for direct substitution in automotive circuits.