RTD-1512/H Equivalent & Substitute Parts Reference

Part Overview

The RTD-1512/H by Recom Power is an isolated DC-DC converter with dual outputs of +12V and -12V at 83mA each and a rated power of 2W. It is designed for ITE (Commercial) and Medical applications requiring high isolation (3 kV), short-circuit protection (SCP), and operates within a -40°C to 85°C temperature range. The RTD-1512/H is marked as obsolete, necessitating the identification of compatible alternatives with matching electrical and mechanical characteristics to ensure continued design and system support.

Substiute Parts

RTD-1512/H

Recom PowerIn Stock: 1236RTD-1512/H Datasheet

Current PartRFQ

R2D-1512/H

Recom PowerIn Stock: 785R2D-1512/H Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution is determined by strict equivalency in all critical parameters: input voltage range, output voltages and currents, power rating, isolation voltage, application sector (ITE, Medical), features (short-circuit protection), operational temperature range, efficiency, mechanical package (10-SMD Module, 6 Leads), and compliance (RoHS3, REACH, MSL). Only parts matching these parameters are suitable as substitutes.

Parameter Comparison

Engineering Selection Recommendations

The RTD-1512/H is obsolete, while the R2D-1512/H remains active. Both devices are RoHS3 compliant and REACH unaffected and share identical compliance and moisture sensitivity levels. The R2D-1512/H covers all required certifications and regulatory statuses specified for the original product.

Frequently Asked Questions (FAQ)

Q1: Can the R2D-1512/H directly replace the RTD-1512/H in existing designs?
A1: The R2D-1512/H shares matching electrical characteristics, isolation performance, output configuration, and compliance standards, with only minor dimensional difference in width.

Q2: Are the output and input voltage ranges identical between RTD-1512/H and R2D-1512/H?
A2: Both parts have a 13.5V to 16.5V input range and provide ±12V outputs at 83mA each.

Q3: Do both parts support the same environmental and safety requirements?
A3: Both parts are RoHS3 compliant, REACH unaffected, suited for ITE (Commercial) and Medical applications, and feature short-circuit protection.

Q4: Is there any difference in package size that must be considered?
A4: The R2D-1512/H is slightly wider at 0.42" (10.7mm) compared to the 0.37" (9.3mm) width of the RTD-1512/H, which may affect PCB footprint compatibility.

Q5: Do both options conform to the same moisture sensitivity level?
A5: Both have Moisture Sensitivity Level (MSL) 1, indicating unlimited floor life in typical conditions.