RT512AIYDT Equivalent & Substitute Parts

Part Overview

The RT512AIYDT is a general-purpose operational amplifier manufactured by STMicroelectronics, configured as a dual-circuit 8-SOIC surface-mount device. This linear amplifier is designed for applications requiring moderate bandwidth and low input bias current characteristics. The part is currently in active product status with 774 units in stock.

Substitute parts are necessary when the RT512AIYDT becomes unavailable, when alternative packaging formats are required for manufacturing processes, or when design requirements necessitate different electrical performance characteristics within compatible parameter ranges. Equivalent parts must maintain compatibility across package type, pin configuration, and critical electrical specifications to ensure direct substitution without circuit redesign.

Key Parameters

Parameter	Value	Unit
Amplifier Type	General Purpose	—
Number of Circuits	2	—
Package / Case	8-SOIC (0.154", 3.90mm Width)	—
Slew Rate	1.5	V/µs
Gain Bandwidth Product	3	MHz
Current - Input Bias	50	nA
Voltage - Input Offset	500	µV
Current - Supply	500	µA (x2 Channels)
Current - Output / Channel	23	mA
Voltage - Supply Span (Min)	6	V
Voltage - Supply Span (Max)	30	V
Operating Temperature	-40°C ~ 125°C	—
Mounting Type	Surface Mount	—
RoHS Status	ROHS3 Compliant	—
Moisture Sensitivity Level (MSL)	1 (Unlimited)	—

Substitute Part Grouping Explanation

Substitution of the RT512AIYDT is determined by the following critical parameters:

Package Compatibility: All substitute parts must use the 8-SOIC (0.154", 3.90mm Width) package format to ensure mechanical and electrical pin compatibility without PCB redesign.

Circuit Configuration: Substitute parts must contain exactly 2 operational amplifier circuits to match the dual-channel configuration of the RT512AIYDT.

Electrical Performance Range: Substitute parts must operate within the supply voltage range of 6V to 30V minimum and maximum specifications. The gain bandwidth product of 3 MHz establishes the frequency performance baseline. Input bias current, input offset voltage, slew rate, and output current specifications define acceptable performance boundaries for signal conditioning applications.

Operating Temperature: Substitute parts must support the extended temperature range of -40°C to 125°C, or a subset thereof that covers the intended application environment.

Regulatory Compliance: All substitute parts must maintain ROHS3 compliance and MSL Level 1 (Unlimited) moisture sensitivity rating to ensure manufacturing process compatibility and long-term reliability.

The substitute parts are grouped into two functional categories: General Purpose Amplifiers (LM258 series) and Voltage Feedback Amplifiers (LT1352 series), with J-FET input variants (TL052 series) available for applications requiring extremely low input bias current.

Parameter Comparison

Parameter	RT512AIYDT (Main)	LM258DG4	LM258DR	LT1352CS8#PBF	LT1352CS8#TRPBF	LT1352IS8#PBF	LT1352IS8#TRPBF	TL052AID	TL052AIDR
Manufacturer	STMicroelectronics	Texas Instruments	UMW	Analog Devices Inc.	Analog Devices Inc.	Analog Devices Inc.	Analog Devices Inc.	Texas Instruments	Texas Instruments
Amplifier Type	General Purpose	General Purpose	General Purpose	Voltage Feedback	Voltage Feedback	Voltage Feedback	Voltage Feedback	J-FET	J-FET
Number of Circuits	2	2	2	2	2	2	2	2	2
Package / Case	8-SOIC	8-SOIC	8-SOIC	8-SOIC	8-SOIC	8-SOIC	8-SOIC	8-SOIC	8-SOIC
Slew Rate (V/µs)	1.5	0.3	—	200	200	200	200	20.7	20.7
Gain Bandwidth Product (MHz)	3	1.1	—	3	3	3	3	3	3
Current - Input Bias (nA)	50	20	45	20	20	20	20	0.03	0.03
Voltage - Input Offset (µV)	500	3000	2000	200	200	200	200	650	650
Current - Supply (µA x2 Channels)	500	500	1000	250	250	250	250	4800	4800
Current - Output / Channel (mA)	23	40	40	14	14	14	14	80	80
Voltage - Supply Span (Min)	6 V	3 V	—	5 V	5 V	5 V	5 V	10 V	10 V
Voltage - Supply Span (Max)	30 V	32 V	32 V	30 V	30 V	30 V	30 V	30 V	30 V
Operating Temperature	-40°C ~ 125°C	-25°C ~ 85°C	-25°C ~ 85°C	-40°C ~ 85°C	-40°C ~ 85°C	-40°C ~ 85°C	-40°C ~ 85°C	-40°C ~ 85°C	-40°C ~ 85°C
Mounting Type	Surface Mount	Surface Mount	Surface Mount	Surface Mount	Surface Mount	Surface Mount	Surface Mount	Surface Mount	Surface Mount
Product Status	Active	Obsolete	Active	Active	Active	Active	Active	Obsolete	Active
RoHS Status	ROHS3 Compliant	ROHS3 Compliant	ROHS3 Compliant	ROHS3 Compliant	ROHS3 Compliant	ROHS3 Compliant	ROHS3 Compliant	ROHS3 Compliant	ROHS3 Compliant
MSL Rating	1 (Unlimited)	1 (Unlimited)	1 (Unlimited)	1 (Unlimited)	1 (Unlimited)	1 (Unlimited)	1 (Unlimited)	1 (Unlimited)	1 (Unlimited)

Engineering Selection Recommendations

LM258 Series (LM258DG4, LM258DR): These general-purpose amplifiers provide direct functional equivalence to the RT512AIYDT with identical dual-circuit 8-SOIC packaging. The LM258DR from UMW is currently in active production status with high inventory availability (455,100 units), making it the preferred choice for new designs requiring immediate supply. The LM258DG4 from Texas Instruments is obsolete but remains available in stock (1,407 units). Both parts maintain ROHS3 compliance and MSL Level 1 rating. The LM258 series exhibits lower input bias current (20-45 nA) and reduced input offset voltage (2-3 mV) compared to the RT512AIYDT, resulting in improved precision for signal conditioning applications. However, the LM258 series operates at a reduced maximum supply voltage of 32V and narrower temperature range (-25°C to 85°C), which may not accommodate extended temperature applications.

LT1352 Series (LT1352CS8#PBF, LT1352CS8#TRPBF, LT1352IS8#PBF, LT1352IS8#TRPBF): These voltage feedback amplifiers from Analog Devices Inc. are all in active production status with combined inventory exceeding 10,400 units. The LT1352 series offers superior electrical performance with 200V/µs slew rate (133× faster than RT512AIYDT), matching 3 MHz gain bandwidth product, and significantly lower input offset voltage (200 µV). These characteristics make the LT1352 series suitable for high-speed signal processing and precision measurement applications. All LT1352 variants maintain ROHS3 compliance, MSL Level 1 rating, and operate across -40°C to 85°C temperature range. The primary trade-off is reduced output current per channel (14 mA versus 23 mA), which may limit driving capability in high-impedance load applications. Packaging variants include tube (PBF), cut tape with digi-reel (TRPBF), and tape & reel (TR) formats to accommodate different manufacturing processes.

TL052 Series (TL052AID, TL052AIDR): These J-FET input amplifiers from Texas Instruments provide extremely low input bias current (30 pA, approximately 1,667× lower than RT512AIYDT) and are suitable for applications requiring ultra-high input impedance. The TL052AIDR is in active production status (9,880 units in stock), while TL052AID is obsolete. Both maintain ROHS3 compliance and MSL Level 1 rating with 3 MHz gain bandwidth product matching the RT512AIYDT. The TL052 series operates across -40°C to 85°C temperature range and supports 10V to 30V supply voltage. Significant trade-offs include substantially higher supply current consumption (4.8 mA per channel versus 500 µA), reduced output current capability (80 mA per channel), and higher input offset voltage (650 µV). These characteristics make the TL052 series appropriate for precision instrumentation and low-bias-current applications where power consumption is not a primary constraint.

Recommended Selection Criteria:

For general-purpose replacement with maximum supply availability and active production status, select LM258DR from UMW.

For applications requiring extended temperature operation to 125°C, the RT512AIYDT remains the only option within this substitute group.

For high-speed signal processing applications, select LT1352IS8#TRPBF or LT1352CS8#TRPBF from Analog Devices Inc.

For ultra-low input bias current applications, select TL052AIDR from Texas Instruments.

Frequently Asked Questions (FAQ)

Q: Can the LM258DR be used as a direct replacement for the RT512AIYDT without circuit modification?

A: The LM258DR is mechanically and electrically compatible for most applications. Both devices use 8-SOIC packaging with identical pin configuration and dual-circuit configuration. However, the LM258DR operates at a maximum supply voltage of 32V (versus 30V for RT512AIYDT) and a narrower temperature range of -25°C to 85°C. If your application requires operation above 85°C or below -25°C, the LM258DR is not suitable. Additionally, the LM258DR exhibits different input offset voltage (2 mV versus 500 µV), which may affect precision applications requiring tight DC accuracy.

Q: What is the primary advantage of the LT1352 series over the RT512AIYDT?

A: The LT1352 series offers significantly higher slew rate (200V/µs versus 1.5V/µs), enabling faster signal response and reduced distortion in high-frequency applications. The LT1352 also provides lower input offset voltage (200 µV versus 500 µV) for improved precision. These characteristics make the LT1352 series suitable for audio amplification, instrumentation, and signal conditioning applications requiring superior dynamic performance.

Q: Why does the TL052 series have higher supply current consumption than the RT512AIYDT?

A: The TL052 series uses J-FET input stages, which inherently require higher bias current to maintain the gate-source junction. This design choice enables the extremely low input bias current specification (30 pA) required for high-impedance measurement applications. The trade-off between input bias current and supply current consumption is fundamental to J-FET amplifier architecture.

Q: Are all substitute parts ROHS3 compliant?

A: Yes, all substitute parts listed in this reference document maintain ROHS3 compliance and MSL Level 1 (Unlimited) moisture sensitivity rating, ensuring compatibility with modern manufacturing processes and environmental regulations.

Q: What packaging options are available for the LT1352 series?

A: The LT1352 series is available in three packaging formats: tube (PBF designation), cut tape with digi-reel (TRPBF designation), and tape & reel (TR designation). The tube format is suitable for manual assembly and small-volume production. The cut tape with digi-reel format accommodates automated pick-and-place equipment with standard reel compatibility. The tape & reel format is optimized for high-volume manufacturing with continuous reel feeding. All three formats use identical 8-SOIC package geometry.

Q: Can the RT512AIYDT be substituted with the TL052AIDR in a precision measurement circuit?

A: The TL052AIDR is suitable for precision measurement applications requiring ultra-low input bias current. However, the TL052AIDR exhibits higher input offset voltage (650 µV versus 500 µV) and significantly higher supply current consumption (4.8 mA per channel versus 500 µA). If your circuit design depends on the lower input offset voltage or lower power consumption of the RT512AIYDT, the TL052AIDR may not be appropriate. Verify that your application can accommodate these electrical differences before substitution.

Q: What is the inventory status of substitute parts?

A: The LM258DR from UMW has the highest inventory availability with 455,100 units in stock. The LT1352 series variants have combined inventory exceeding 10,400 units across all packaging options. The TL052AIDR has 9,880 units available. The LM258DG4 and TL052AID are obsolete but remain available in limited quantities (1,407 and 3,630 units respectively). For new designs, prioritize active production status parts: LM258DR, all LT1352 variants, and TL052AIDR.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message