RT1210FRE0710RL Equivalent & Substitute Parts

Part Overview

The RT1210FRE0710RL is a thin film chip resistor manufactured by YAGEO in the 1210 (3225 Metric) package format. This component delivers 10 Ohms resistance at ±1% tolerance with 0.25W power rating, designed for precision applications requiring stable performance across the -55°C to 125°C operating temperature range. The part maintains Active product status with full RoHS3 compliance and unlimited moisture sensitivity rating (MSL 1). Substitute parts are identified when equivalent electrical specifications and mechanical compatibility are maintained within the allowed parameter tolerances for this resistor category.

Substiute Parts

RT1210FRE0710RL

YAGEOIn Stock: 1028RT1210FRE0710RL Datasheet

Current PartRFQ

RT1210DRE0710RL

YAGEOIn Stock: 1949RT1210DRE0710RL Datasheet

UpgradeRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution for the RT1210FRE0710RL is determined by strict adherence to the following parameters:

• Resistance Value: Must be 10 Ohms (exact match required)
• Package Format: Must be 1210 (3225 Metric) for mechanical and electrical compatibility
• Composition: Must be Thin Film to maintain temperature coefficient and stability characteristics
• Power Rating: Must be 0.25W minimum
• Operating Temperature Range: Must support -55°C to 125°C
• Compliance: Must maintain RoHS3 compliance and MSL 1 rating

The RT1210DRE0710RL qualifies as a substitute because it matches all mandatory parameters while offering improved tolerance specification (±0.5% versus ±1%), which represents an upgrade path for applications requiring tighter resistance accuracy.

Parameter Comparison

Engineering Selection Recommendations

Both the RT1210FRE0710RL and RT1210DRE0710RL maintain Active product status with full RoHS3 compliance and REACH unaffected designation. Selection between these parts depends on application tolerance requirements. The RT1210FRE0710RL provides standard ±1% tolerance suitable for general-purpose applications. The RT1210DRE0710RL offers ±0.5% tolerance for precision circuits requiring tighter resistance accuracy. Both components are qualified for identical operating conditions and environmental compliance requirements.

Frequently Asked Questions (FAQ)

Q: Can RT1210DRE0710RL replace RT1210FRE0710RL in existing designs?

A: Yes. Both parts share identical resistance value, power rating, package format, and operating temperature range. The RT1210DRE0710RL provides superior tolerance specification (±0.5% versus ±1%), making it a direct upgrade for applications where tighter resistance accuracy is beneficial or required.

Q: Are there mechanical compatibility concerns when substituting these parts?

A: No. Both components use the 1210 (3225 Metric) package with identical dimensions (0.122" L x 0.102" W, 3.10mm x 2.60mm) and maximum seated height (0.026", 0.65mm). PCB footprints and assembly processes remain unchanged.

Q: Do these parts require different handling or storage procedures?

A: No. Both parts carry MSL 1 (Unlimited) moisture sensitivity rating, indicating no special moisture control requirements during storage or handling. RoHS3 compliance and REACH status are identical.

Q: What is the primary difference between these substitute parts?

A: The RT1210DRE0710RL provides ±0.5% tolerance compared to the ±1% tolerance of the RT1210FRE0710RL. All other electrical and mechanical specifications remain identical, including temperature coefficient (±50ppm/°C), power rating (0.25W), and operating temperature range (-55°C to 125°C).