RT1206FRE07910RL Equivalent & Substitute Parts

Part Overview

The RT1206FRE07910RL is a 910 Ohms ±1% thin film chip resistor manufactured by YAGEO in 1206 (3216 Metric) package format with 0.25W power rating. This component is classified as Active product status with full RoHS3 compliance and unlimited moisture sensitivity rating. Substitute parts are identified when equivalent electrical performance, mechanical compatibility, and environmental specifications can be maintained across alternative manufacturers while meeting or exceeding the original design requirements.

Substiute Parts

RT1206FRE07910RL

YAGEOIn Stock: 750RT1206FRE07910RL Datasheet

Current PartRFQ

ERA-8AEB911V

Panasonic Electronic ComponentsIn Stock: 19562ERA-8AEB911V Datasheet

UpgradeRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the RT1206FRE07910RL is determined by the following critical parameters:

• Resistance Value: Must be 910 Ohms
• Package Format: Must be 1206 (3216 Metric) to ensure PCB footprint compatibility
• Power Rating: Must be 0.25W minimum to support circuit requirements
• Composition: Thin film construction maintains electrical performance characteristics
• Operating Temperature Range: Must cover -55°C ~ 155°C minimum
• RoHS Compliance: ROHS3 compliance required for regulatory alignment
• Moisture Sensitivity: MSL 1 rating ensures handling compatibility

The ERA-8AEB911V qualifies as a direct substitute based on matching all critical parameters while offering enhanced tolerance (±0.1% vs ±1%) and automotive-grade AEC-Q200 certification.

Parameter Comparison

Engineering Selection Recommendations

Both the RT1206FRE07910RL and ERA-8AEB911V are Active status components with full ROHS3 compliance and unlimited moisture sensitivity ratings, ensuring regulatory and handling compatibility. The ERA-8AEB911V provides enhanced performance through tighter tolerance specification (±0.1% vs ±1%) and lower temperature coefficient (±25ppm/°C vs ±50ppm/°C), with additional AEC-Q200 automotive qualification. Selection between these components depends on application-specific tolerance and stability requirements rather than fundamental compatibility constraints.

Frequently Asked Questions (FAQ)

Q: Can ERA-8AEB911V replace RT1206FRE07910RL in existing designs?

A: Yes. Both components share identical resistance value, power rating, package format, and operating temperature range. The ERA-8AEB911V meets or exceeds all electrical and mechanical specifications of the original part.

Q: What are the dimensional differences between these parts?

A: RT1206FRE07910RL dimensions are 0.122" L x 0.063" W (3.10mm x 1.60mm) with 0.026" maximum seated height. ERA-8AEB911V dimensions are 0.126" L x 0.063" W (3.20mm x 1.60mm) with 0.028" maximum seated height. Both fit standard 1206 footprints with minimal dimensional variance.

Q: Does the tighter tolerance of ERA-8AEB911V affect circuit compatibility?

A: No. The ±0.1% tolerance of ERA-8AEB911V is a performance enhancement that maintains backward compatibility with designs specified for ±1% tolerance. Circuits designed for ±1% tolerance operate within specification with ±0.1% components.

Q: Are both parts suitable for automotive applications?

A: RT1206FRE07910RL is industrial-grade with ROHS3 compliance. ERA-8AEB911V carries AEC-Q200 automotive qualification, making it suitable for automotive environments. Both meet general industrial operating temperature and compliance requirements.

Q: What is the significance of temperature coefficient differences?

A: RT1206FRE07910RL has ±50ppm/°C temperature coefficient while ERA-8AEB911V has ±25ppm/°C. Lower temperature coefficient indicates better resistance stability across temperature variations, beneficial for precision applications. Both values are within acceptable ranges for standard circuit applications.