RT1206FRE07825RL Equivalent & Substitute Parts

Part Overview

The RT1206FRE07825RL is a 825 Ohm ±1% thin film chip resistor in 1206 (3216 Metric) package rated for 0.25W (1/4W) power dissipation. Manufactured by YAGEO, this component is Active status and widely used in general-purpose electronic applications. Substitute parts are identified based on matching resistance value, package form factor, power rating, and operating temperature range while allowing for tolerance and composition improvements.

Substiute Parts

RT1206FRE07825RL

YAGEOIn Stock: 5981RT1206FRE07825RL Datasheet

Current PartRFQ

RT1206DRE07825RL

YAGEOIn Stock: 5998RT1206DRE07825RL Datasheet

UpgradeRFQ

ERA-8AEB8250V

Panasonic Electronic ComponentsIn Stock: 3981ERA-8AEB8250V Datasheet

UpgradeRFQ

RG3216P-8250-B-T5

SusumuIn Stock: 6108RG3216P-8250-B-T5 Datasheet

UpgradeRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the RT1206FRE07825RL are qualified based on the following criteria:

• Identical resistance value: 825 Ohms
• Identical package form factor: 1206 (3216 Metric)
• Identical power rating: 0.25W (1/4W)
• Identical composition: Thin Film
• Matching operating temperature range: -55°C ~ 155°C
• Tolerance equal to or tighter than ±1%
• RoHS3 compliance maintained
• MSL rating of 1 (Unlimited) or equivalent

Three substitute parts meet these criteria with enhanced specifications in tolerance and temperature coefficient performance.

Parameter Comparison

Engineering Selection Recommendations

All substitute parts maintain Active product status and ROHS3 compliance. Selection depends on application requirements:

RT1206DRE07825RL offers improved tolerance (±0.5%) while maintaining identical temperature coefficient and operating range, suitable for applications requiring tighter resistance accuracy without automotive qualification.

ERA-8AEB8250V and RG3216P-8250-B-T5 both provide superior tolerance (±0.1%) and lower temperature coefficient (±25ppm/°C), with AEC-Q200 automotive qualification. RG3216P-8250-B-T5 additionally includes anti-sulfur protection. These are appropriate for automotive applications or environments requiring enhanced stability and reliability.

Frequently Asked Questions (FAQ)

Q: Can RT1206DRE07825RL directly replace RT1206FRE07825RL?

A: Yes. Both are YAGEO thin film 1206 resistors with 825 Ohm resistance, 0.25W power rating, and identical operating temperature range. RT1206DRE07825RL has tighter tolerance (±0.5% vs ±1%), making it a direct upgrade with no circuit modifications required.

Q: What is the difference between ERA-8AEB8250V and RG3216P-8250-B-T5?

A: Both offer ±0.1% tolerance and ±25ppm/°C temperature coefficient with AEC-Q200 automotive qualification. RG3216P-8250-B-T5 includes anti-sulfur protection and has a lower maximum seated height (0.020" vs 0.028"), which may be relevant for space-constrained applications.

Q: Are the substitute parts pin-compatible with the original?

A: Yes. All substitute parts use the 1206 (3216 Metric) package with 2 terminations, maintaining identical footprint and PCB layout compatibility.

Q: Can I use ERA-8AEB8250V or RG3216P-8250-B-T5 in non-automotive applications?

A: Yes. Automotive-qualified components exceed general-purpose requirements and are suitable for any application within the specified operating temperature and power rating parameters.

Q: What does MSL 1 (Unlimited) mean for moisture sensitivity?

A: MSL 1 indicates the component has unlimited shelf life without moisture bake-out requirements, providing maximum handling flexibility during storage and assembly.