RT1206FRE07820KL Equivalent & Substitute Parts

Part Overview

The RT1206FRE07820KL is a 820 kOhms ±1% 0.25W thin film chip resistor in 1206 (3216 Metric) package manufactured by YAGEO. This component is classified as Active product status with full RoHS3 compliance and unlimited moisture sensitivity rating. Equivalent and substitute parts are identified when identical or superior electrical and mechanical specifications are required for circuit design flexibility, supply chain continuity, or performance optimization within the same package footprint.

Substiute Parts

RT1206FRE07820KL

YAGEOIn Stock: 1178RT1206FRE07820KL Datasheet

Current PartRFQ

ERA-8AEB824V

Panasonic Electronic ComponentsIn Stock: 4690ERA-8AEB824V Datasheet

UpgradeRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the RT1206FRE07820KL is determined by the following mandatory parameters:

• Resistance value: 820 kOhms (exact match required)
• Package type: 1206 (3216 Metric) form factor
• Power rating: 0.25W minimum
• Composition: Thin film technology
• Operating temperature range: -55°C to 155°C minimum coverage
• RoHS3 compliance status

The ERA-8AEB824V qualifies as a direct substitute based on matching all mandatory parameters. This part demonstrates superior tolerance specification (±0.1% versus ±1%) and enhanced temperature coefficient performance (±25ppm/°C versus ±50ppm/°C), while maintaining identical resistance, power rating, package configuration, and compliance certifications.

Parameter Comparison

Engineering Selection Recommendations

Both the RT1206FRE07820KL and ERA-8AEB824V are Active status components with full RoHS3 compliance and unlimited moisture sensitivity classification. Selection between these parts depends on application-specific requirements:

The RT1206FRE07820KL is suitable for general-purpose applications where ±1% tolerance and standard thin film performance meet circuit specifications.

The ERA-8AEB824V is appropriate for applications requiring tighter tolerance control (±0.1%), improved temperature stability (±25ppm/°C), and automotive-grade reliability through AEC-Q200 qualification. The automotive rating does not restrict use in non-automotive applications.

Both components maintain identical package footprint, power dissipation capability, and operating temperature range, ensuring direct PCB layout compatibility without design modification.

Frequently Asked Questions (FAQ)

Q: Can ERA-8AEB824V replace RT1206FRE07820KL in existing designs?

A: Yes. Both components share identical 1206 package dimensions, 0.25W power rating, 820 kOhms resistance, and -55°C to 155°C operating range. PCB footprint and thermal characteristics remain unchanged. The ERA-8AEB824V offers improved tolerance and temperature coefficient specifications.

Q: What is the significance of the ±0.1% tolerance in ERA-8AEB824V compared to ±1% in RT1206FRE07820KL?

A: Tolerance specification defines the maximum deviation from the nominal 820 kOhms value. The ±0.1% tolerance in ERA-8AEB824V restricts variation to ±0.82 kOhms, while ±1% in RT1206FRE07820KL allows ±8.2 kOhms variation. Applications requiring precise resistance values benefit from tighter tolerance specifications.

Q: Does AEC-Q200 qualification on ERA-8AEB824V affect its use in non-automotive circuits?

A: No. AEC-Q200 is an automotive reliability standard that establishes enhanced qualification requirements. Components meeting this standard are suitable for any application and do not impose restrictions on non-automotive use.

Q: Are the physical dimensions identical between these two parts?

A: Both components use the 1206 (3216 Metric) package. Dimensional variations exist within manufacturing tolerances: RT1206FRE07820KL measures 0.122" L × 0.063" W (3.10mm × 1.60mm) with 0.026" maximum height; ERA-8AEB824V measures 0.126" L × 0.063" W (3.20mm × 1.60mm) with 0.028" maximum height. These minor differences remain within standard 1206 package specifications and do not affect PCB compatibility.

Q: What compliance certifications apply to both parts?

A: Both components are ROHS3 compliant, REACH unaffected, and classified under ECCN EAR99 with HTSUS code 8533.21.0030. Moisture sensitivity level is 1 (Unlimited) for both parts, indicating no special moisture handling requirements during storage or assembly.