RT1206FRE0780K6L Equivalent & Substitute Parts

Part Overview

The RT1206FRE0780K6L is a 80.6 kOhms ±1% thin film chip resistor manufactured by YAGEO in 1206 (3216 Metric) package format. This component is actively produced and widely used in general-purpose electronic applications requiring precision resistive elements. Substitute parts are identified when equivalent electrical performance and mechanical compatibility can be maintained across the specified parameter range, enabling procurement flexibility and supply chain optimization.

Substiute Parts

RT1206FRE0780K6L

YAGEOIn Stock: 1051RT1206FRE0780K6L Datasheet

Current PartRFQ

ERA-8AEB8062V

Panasonic Electronic ComponentsIn Stock: 4318ERA-8AEB8062V Datasheet

UpgradeRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the RT1206FRE0780K6L is determined by the following criteria:

• Identical resistance value: 80.6 kOhms
• Equal or tighter tolerance specification (±1% or better)
• Identical power rating: 0.25W (1/4W)
• Identical package format: 1206 (3216 Metric)
• Thin film composition
• Operating temperature range meeting or exceeding -55°C ~ 155°C
• RoHS3 compliance
• MSL rating of 1 (Unlimited)

The ERA-8AEB8062V from Panasonic Electronic Components meets all substitution criteria with enhanced tolerance specification (±0.1%) and automotive-grade qualification (AEC-Q200).

Parameter Comparison

Engineering Selection Recommendations

Both the RT1206FRE0780K6L and ERA-8AEB8062V are active production components with full RoHS3 compliance and unlimited moisture sensitivity rating. The ERA-8AEB8062V provides enhanced performance characteristics through tighter tolerance (±0.1% versus ±1%) and lower temperature coefficient (±25ppm/°C versus ±50ppm/°C), with automotive-grade AEC-Q200 qualification. Selection between these components should be based on application requirements for tolerance precision and environmental operating conditions. Both components maintain identical mechanical compatibility and thermal operating range.

Frequently Asked Questions (FAQ)

Q: Can ERA-8AEB8062V replace RT1206FRE0780K6L in existing designs?

A: Yes. Both components share identical resistance value, power rating, package format, and operating temperature range. The ERA-8AEB8062V features improved tolerance specification and lower temperature coefficient, making it suitable for direct substitution in applications where these enhanced characteristics are beneficial or neutral.

Q: What is the significance of the tolerance difference between ±1% and ±0.1%?

A: Tolerance specification defines the maximum allowable deviation from the nominal resistance value. The ±0.1% tolerance of ERA-8AEB8062V provides tighter resistance accuracy compared to the ±1% tolerance of RT1206FRE0780K6L. Applications requiring precision resistive networks or tight circuit calibration benefit from the enhanced tolerance specification.

Q: Are the physical dimensions compatible between these two parts?

A: Both components use the 1206 (3216 Metric) package format. Minor dimensional variations exist: RT1206FRE0780K6L measures 0.122" L x 0.063" W (3.10mm x 1.60mm) with 0.026" maximum seated height, while ERA-8AEB8062V measures 0.126" L x 0.063" W (3.20mm x 1.60mm) with 0.028" maximum seated height. These variations remain within standard 1206 package tolerances and do not affect PCB footprint compatibility.

Q: What does AEC-Q200 qualification indicate?

A: AEC-Q200 is an automotive industry standard qualification for passive components. The ERA-8AEB8062V carries this certification, indicating compliance with automotive reliability and environmental stress testing requirements. This qualification is beneficial for automotive applications but does not restrict use in non-automotive environments.

Q: Are both components RoHS compliant?

A: Yes. Both RT1206FRE0780K6L and ERA-8AEB8062V are ROHS3 compliant with MSL rating of 1 (Unlimited), indicating full compliance with hazardous substance restrictions and unlimited shelf life under standard storage conditions.