RT1206FRE07806RL Equivalent & Substitute Parts

Part Overview

The RT1206FRE07806RL is a 806 Ohms ±1% thin film chip resistor manufactured by YAGEO in the 1206 (3216 Metric) package format. This component is rated for 0.25W (1/4W) power dissipation with an operating temperature range of -55°C to 155°C. The part is currently in active production status with ROHS3 compliance and unlimited moisture sensitivity rating (MSL 1). Substitute parts are identified when equivalent electrical specifications and mechanical compatibility are maintained across the same package class and functional requirements.

Substiute Parts

RT1206FRE07806RL

YAGEOIn Stock: 977RT1206FRE07806RL Datasheet

Current PartRFQ

ERA-8AEB8060V

Panasonic Electronic ComponentsIn Stock: 4977ERA-8AEB8060V Datasheet

UpgradeRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the RT1206FRE07806RL is determined by the following criteria:

• Resistance value must be 806 Ohms
• Package must be 1206 (3216 Metric) to ensure mechanical and electrical compatibility
• Power rating must be minimum 0.25W (1/4W)
• Composition must be thin film
• Operating temperature range must encompass or match -55°C to 155°C
• RoHS3 compliance is required for regulatory alignment

The ERA-8AEB8060V qualifies as a direct substitute based on these parameters. While it offers improved tolerance (±0.1% versus ±1%) and lower temperature coefficient (±25ppm/°C versus ±50ppm/°C), these represent performance enhancements rather than deviations from the core specification.

Parameter Comparison

Engineering Selection Recommendations

Both the RT1206FRE07806RL and ERA-8AEB8060V are active production components with ROHS3 compliance and identical moisture sensitivity ratings. The ERA-8AEB8060V carries AEC-Q200 automotive qualification, which provides additional reliability assurance for applications requiring automotive-grade components. Selection between these parts should be based on application requirements: the RT1206FRE07806RL for general-purpose applications and the ERA-8AEB8060V for automotive or high-reliability environments where tighter tolerance and lower temperature coefficient provide performance benefits.

Frequently Asked Questions (FAQ)

Q: Can ERA-8AEB8060V replace RT1206FRE07806RL in existing designs?

A: Yes. Both components share identical resistance value (806 Ohms), power rating (0.25W), package format (1206), composition (thin film), and operating temperature range (-55°C to 155°C). The ERA-8AEB8060V offers superior tolerance and temperature stability, making it a direct functional substitute.

Q: What are the physical dimension differences between these parts?

A: The RT1206FRE07806RL measures 0.122" L × 0.063" W (3.10mm × 1.60mm) with maximum seated height of 0.026" (0.65mm). The ERA-8AEB8060V measures 0.126" L × 0.063" W (3.20mm × 1.60mm) with maximum seated height of 0.028" (0.70mm). Both fit the 1206 package specification; minor dimensional variations are within standard package tolerances.

Q: Are there compliance or certification differences?

A: Both parts are ROHS3 compliant and REACH unaffected. The ERA-8AEB8060V additionally carries AEC-Q200 automotive qualification, which is not applicable to the RT1206FRE07806RL. This qualification is relevant only for automotive applications.

Q: What is the tolerance difference impact?

A: The RT1206FRE07806RL has ±1% tolerance while the ERA-8AEB8060V has ±0.1% tolerance. For the 806 Ohm value, this represents a tolerance band of ±8.06 Ohms versus ±0.806 Ohms respectively. Selection depends on circuit accuracy requirements.

Q: Can these parts be used interchangeably in tape and reel packaging?

A: Yes. Both components are supplied in Tape & Reel (TR) packaging format, maintaining compatibility for automated assembly processes.