RT1206FRE07787RL Equivalent & Substitute Parts

Part Overview

The RT1206FRE07787RL is a 787 Ohm ±1% thin film chip resistor manufactured by YAGEO in 1206 (3216 Metric) package format. This surface mount device is rated for 0.25W (1/4W) power dissipation with an operating temperature range of -55°C to 155°C. The component is ROHS3 compliant and carries MSL Level 1 (Unlimited) moisture sensitivity rating. As an active product with 957 pieces in stock, substitute parts may be required for design optimization, supply chain flexibility, or enhanced performance specifications in specific applications.

Substiute Parts

RT1206FRE07787RL

YAGEOIn Stock: 979RT1206FRE07787RL Datasheet

Current PartRFQ

ERA-8AEB7870V

Panasonic Electronic ComponentsIn Stock: 4106ERA-8AEB7870V Datasheet

UpgradeRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the RT1206FRE07787RL is determined by the following critical parameters:

• Resistance Value: Must be 787 Ohms
• Package Format: Must be 1206 (3216 Metric) for PCB footprint compatibility
• Power Rating: Must be 0.25W (1/4W) or higher
• Composition: Thin film technology maintains performance characteristics
• Operating Temperature Range: Must support -55°C to 155°C minimum
• Compliance: ROHS3 and REACH compliance required for regulatory alignment

The ERA-8AEB7870V from Panasonic Electronic Components qualifies as a direct substitute. This part maintains identical resistance, package, power rating, and temperature range specifications while offering enhanced tolerance (±0.1% versus ±1%) and automotive-grade AEC-Q200 qualification.

Parameter Comparison

Engineering Selection Recommendations

Both the RT1206FRE07787RL and ERA-8AEB7870V are active products with full regulatory compliance. Selection between these parts should be based on application requirements:

The RT1206FRE07787RL is suitable for general-purpose applications requiring standard tolerance (±1%) performance with proven availability and cost efficiency.

The ERA-8AEB7870V is appropriate for applications demanding tighter tolerance control (±0.1%) and automotive-grade reliability. The AEC-Q200 qualification and lower temperature coefficient (±25ppm/°C versus ±50ppm/°C) provide enhanced performance stability across temperature extremes. This part is recommended for precision circuits and automotive or industrial environments where component reliability is critical.

Both parts maintain identical mechanical compatibility with 1206 package footprints and identical electrical operating parameters for power dissipation and temperature range.

Frequently Asked Questions (FAQ)

Q: Can ERA-8AEB7870V replace RT1206FRE07787RL in existing designs?

A: Yes. Both parts share identical resistance value (787 Ohms), package format (1206), power rating (0.25W), and operating temperature range (-55°C to 155°C). The ERA-8AEB7870V offers superior tolerance and temperature coefficient performance without requiring design modifications.

Q: What is the difference in tolerance between these parts?

A: The RT1206FRE07787RL has ±1% tolerance, while the ERA-8AEB7870V has ±0.1% tolerance. The tighter tolerance of the ERA-8AEB7870V reduces resistance variation across the production batch, beneficial for precision analog circuits and signal conditioning applications.

Q: Are both parts suitable for high-temperature applications?

A: Yes. Both parts operate across -55°C to 155°C. However, the ERA-8AEB7870V maintains better performance stability due to its lower temperature coefficient (±25ppm/°C versus ±50ppm/°C), resulting in more predictable resistance changes across temperature extremes.

Q: Do these parts require different PCB handling or storage procedures?

A: No. Both parts carry MSL Level 1 (Unlimited) moisture sensitivity rating, requiring no special moisture control during storage or handling. Standard ESD precautions apply to both components.

Q: Is the ERA-8AEB7870V more expensive than the RT1206FRE07787RL?

A: Cost comparison is not provided in the technical specifications. Consult current supplier pricing for procurement decisions.

Q: Can these parts be used interchangeably in automated assembly?

A: Yes. Both parts use identical 1206 package format and two-termination configuration, compatible with standard pick-and-place equipment and re