RT1206FRE07698RL Equivalent & Substitute Parts

Part Overview

The RT1206FRE07698RL is a 698 Ohm ±1% thin film chip resistor manufactured by YAGEO in the 1206 (3216 Metric) package format. This component is rated for 0.25W (1/4W) power dissipation with an operating temperature range of -55°C to 155°C. The part is currently in active production status with ROHS3 compliance and unlimited moisture sensitivity rating (MSL 1).

Substitute parts are identified when equivalent resistance values, package formats, and power ratings are maintained while offering improved electrical characteristics or enhanced reliability certifications.

Substiute Parts

RT1206FRE07698RL

YAGEOIn Stock: 787RT1206FRE07698RL Datasheet

Current PartRFQ

ERA-8AEB6980V

Panasonic Electronic ComponentsIn Stock: 2461ERA-8AEB6980V Datasheet

UpgradeRFQ

RNCF1206BKC698R

Stackpole Electronics IncIn Stock: 2547RNCF1206BKC698R Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the RT1206FRE07698RL is determined by the following criteria:

• Resistance Value: Must be 698 Ohms
• Package Format: Must be 1206 (3216 Metric)
• Composition: Must be Thin Film
• Operating Temperature Range: Must support -55°C ~ 155°C minimum
• Compliance: Must maintain ROHS3 compliance and MSL 1 rating
• Tolerance & Power Rating: Tolerance may be equal or tighter (lower value); power rating may be equal or higher

The identified substitute parts meet these core requirements while offering enhanced specifications in tolerance and/or power rating characteristics.

Parameter Comparison

Engineering Selection Recommendations

ERA-8AEB6980V (Panasonic Electronic Components) provides improved tolerance specification (±0.1% versus ±1%) and lower temperature coefficient (±25ppm/°C versus ±50ppm/°C) while maintaining identical power rating and package format. This part carries AEC-Q200 automotive qualification, suitable for applications requiring enhanced reliability and precision. Physical dimensions are 0.126" L x 0.063" W with maximum seated height of 0.028".

RNCF1206BKC698R (Stackpole Electronics Inc) offers increased power rating (0.333W versus 0.25W) in the same 1206 package with improved tolerance (±0.1% versus ±1%). This part also carries AEC-Q200 automotive qualification. Physical dimensions are 0.120" L x 0.061" W with maximum seated height of 0.026", matching the original part's height specification more closely.

Both substitute parts maintain full compliance with ROHS3 and MSL 1 requirements. Selection between substitutes depends on application requirements for power dissipation margin and dimensional constraints.

Frequently Asked Questions (FAQ)

Q: Can ERA-8AEB6980V replace RT1206FRE07698RL in all applications?

A: Yes, provided the application does not have specific constraints against automotive-qualified components. The ERA-8AEB6980V maintains the same resistance, power rating, package format, and operating temperature range. The improved tolerance (±0.1%) and lower temperature coefficient (±25ppm/°C) are compatible with or superior to the original specification.

Q: What is the primary difference between the two substitute parts?

A: RNCF1206BKC698R provides higher power rating (0.333W versus 0.25W), offering greater thermal margin in power-dissipation-limited circuits. ERA-8AEB6980V provides lower temperature coefficient (±25ppm/°C), offering better stability across temperature extremes. Both offer ±0.1% tolerance improvement.

Q: Are there physical dimension differences that affect PCB layout?

A: Yes. RT1206FRE07698RL and RNCF1206BKC698R share identical maximum seated height (0.026" / 0.65mm). ERA-8AEB6980V has slightly greater height (0.028" / 0.70mm). Length and width variations are minor (within 0.006" / 0.15mm) and typically do not affect standard 1206 footprint compatibility.

Q: Do the substitute parts require different soldering or handling procedures?

A: No. All parts are 1206 (3216 Metric) thin film resistors with identical MSL 1 (Unlimited) moisture sensitivity rating and standard two-termination configuration. Standard SMD assembly and reflow processes apply to all three parts.

Q: Can RT1206FRE07698RL be used where RNCF1206BKC698R or ERA-8AEB6980V is specified?

A: No. The original part has ±1% tolerance versus ±0.1% for the substitutes. If a design specifies a substitute part, the tighter tolerance requirement must be met. Reverse substitution is not recommended without design review.